Related
based on QTEK 1.30 ROM .Asian Language Suport ROM is here
Dlownload from Here!
http://www.asukal.jp/ROMs/Qtek_CJKT_130.rar 54MB
ROM has
1;Asian support All in One font <thailand / Japanese / Simp-Trad Chinese / Korean>
2;also Asian Language Encoding support wince.nls, enable encodeing in INBOX, IE,
also able to run Loclized Applications
3:Extended ROM is opened in Default
4:CAB install Security Prompt was killed <but after QTEK Extended ROM files were installed,
it will revive again, you must kill it again
5nly OS ROM image <NK.nbf> was included. Radio Image and Extended ROM image must prepared by yoursel.
6;Chinese and Japanese font for ClearVue also in this.
Enable PDF view in Chinese * Japanese
i tested on my jasjar, no problems, but now many gusy have faced the problems after flush NEW ROM.
After flushed ROM, the device was Stucked on Splash Screen.
So you must know flushing ROM is dangarouse and do it as your own risk.
i can not take responsibilty.
<My Exec also died after flushed I-mate latest 1.30 ROM>
-------------------------------------------------------------------
*default keyboad Rayout is Japanese <0411> you can change Valu as your Country code
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
*nls value in Registry is also Japanese, yu can change it.
HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
"LegacyLocaleMode"=dword:00000001
*Internationa Default code also set as Japanese code 0411.
Addjust as your like
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
****USE registry editor to edit avobe, or one of my friends created
Aplet to able change some of those value with Graphical Inter face.
Namede JUflounder.exe
you can download it free! thanks to him
http://aimakidechi.hp.infoseek.co.jp/jasjar/contents_007/contents_007-002-en.html
Enjoy it!
Thanks, has it included the Chinese IME (like Pinyin by keyboard)?
sorry no china-japanese ime on it.
i didnt succeed to get any Chinese SIP with Hard Keyborad support,
But some Soft Input Panele include hand writings are here.
http://xdao2.seesaa.net/article/12029203.html
Go to option, you can switch the option language to Chinese or English.
Also input Letters can be swithced Simple or Traditional Chinese.
Sorry no support and use as your own risk.
also some tipes are on
http://xdao2.seesaa.net/
Did you mean thai font include?
wammy28 said:
Did you mean thai font include?
Click to expand...
Click to collapse
ya, uesed a Unicode font included Thai font<i dont know it cab be beautifull to use for You Thailand Guys>
PLS see the Captures here
http://asukal.seesaa.net/article/9314068.html
Thai Font+Both Chinese+Korean+Japanese into one font.
also Reginal setting and Encode in IE and Inbox
PLS see here for that
http://asukal.seesaa.net/article/6290940.html
http://asukal.seesaa.net/article/9323597.html
***Japanese Site, so you can see only Captures!*****
Thanks for you quick response
I already tried it. Thai font work very well. You can see my post from here http://www.pdamobiz.com/forum/forum_posts.asp?TID=56426&PN=1&TPN=1
However, some thai characters don't display especially thai characters in the third (top) row (I thought you known that thai language has 3 level of display). I'm very interesting to your work. Unfortunately , I can't read japanease. If anything help to improve this ,tell me.
Extremely good thanks!
But has a question When establishes the e-mail box 1. Mailbox address input OK 2. Segment OK 3. Name account name password OK4.POP3 hypothesis e-mail box name OK. The fifth step cannot go in afterwards Why? Regional settings I use Chinese (Taiwan) thanks!
Dopod 900
rom 1.13.36 CHT
radio 1.09.00
extrom 1.13.134 CHT
first of all, pls flush Geniune Qtek Extended ROM also.
this may have device drivers or important files.
size is totaly 750kb all CAB
also QUESTION for all gusy flushed my rom.
My ectrom has opend, you may also.
But i cant write and delete files into Extrom.
How about yours??
can you write or delete files?
it seems to be written or delete, they will returen to default after soft reset
:shock:
ming15> i can finish set up of e-mailaccount.
i dont think it will not be able to go step 5.
pls try again or flush rom again.
wammy28>the thai font problem is coze of the Font I injected.
due too no knowlege of Thail language for me,
i coudnt fount it.
i used Uniceode font, one font included Multi Languages FONTs.
i prefere use this font or another Unicode font.
But very few Unicode font has such like many Language support.
If they have, the size of Font will be 20MB or 30MB like a cyber unicode font.
i think if you thailand guys need correct one.
we must make another ROM for Specialize Thiland Language.
good luck!
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
ming15 said:
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
Click to expand...
Click to collapse
i got made Special tools with Buzz's tool. to unlock extrom for New Qtek<if cant unlock with old tool>
DL this one, and remove all previouse unlock tool if you use already.
<hard reset is better>
Install this can, the go to Start Menu and find Unlocker Icon,
And Excute this, make soft reset.
Mabe you can get Extrom free!
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
alisultan said:
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
Click to expand...
Click to collapse
of course you can do that!
just replace wince.nls in ROM and inject Arabic font also into ROM,
then add the fontlink registry of default.hv.
thats all, if you upload Arabic font and registry and wince.nls here,
i can make you soo!
But if later than today, i have no time till at theend of May due to business trip!
My summary to ROM cook is here
http://www.asukal.jp/hv_rom/default.htm
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
kimlui said:
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
Click to expand...
Click to collapse
ofcourse u can use in Exec,
you problems is one of troubles while upgrading,
USB mode? right?
try to use UNI_ExitBootloader.exe by Buzz,
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
hope you can get out from Bootloader.
So all guy who want to try upgrade, pls read following thread well and
must be know unofffial upgrade has some dagerouse with u!
here! please read well.
http://forum.xda-developers.com/viewtopic.php?t=43592&postdays=0&postorder=asc&start=0
i told you all again! i can not take any responsibilty even you will be in trouble with upgrade. This ROM doesnt have problem, but can not gurantee!
My Exec also have still stucked on Splash Screeen by myself after try Upgraded with Offcial I-mate rom. still......
Giood Luck!
thank's for reply
but wher could i gent wince.nls for arabic , i have thes file from a thaird party software do you mean this one and i inclood the font as wel please check
thank's
When I edit some MUI files (from SPV C550), for example "tshres.dll.04XX.mui" it looks ok... but not in phone.... it shows sometimes some mistakes like the one on the attachment I have uploaded.
Maybe someone knows how to fix it? It hapens only on few files but they are necessary to finish a langpack I create
I am looking forward for your help and thank you very much in advance!
Are you editing on your computer and then uploading it to the PDA (the normal way of developing apps)? If so then it has to do with your font & language pack. Your computer has probably got your languages of choice installed, and you also probably have the appropriate fonts on it as well - but are they on your PDA? If not, then that would explain the box that appears once you port it to the PDA (which basically just indicates that the font that is installed on the PDA does not have that particular character for that language). I don't know how you could overcome this, except to take your computer font and convert it/import it to the PDA. Hope that helps!
Black-wolf
The phone supports all Polish characters... this is not because of this....
It happens even when I open the original english mui file and just save it in ResHacker (or any other program).
Dear all ..
please ...i try to upgrading my JASJAM to WM6 is okay and Every thing okay but when i need to install the arabic file i maen CAB file like ACERT_ARB &Default_APrayerTimes_JSJM_eula the arabic dosn't work and my device tell me this message (( can not ran in this device )) So can any one tell me how to Solved this problem ..
Best Regards
GSM system said:
Dear all .. [snip!]
Click to expand...
Click to collapse
Yep! That's right. If you're trying to install the cabs from i-mate then Imaginet's Arabizer is i-mate branded. Wait (a long time) for i-mate to release WM6 for JASJAM (if ever) or buy your own legit copy of the Arabizer suite.
Arabic on jasjam
Arabic runs with any WM6 version on the jasjam using the attached files (also available on imate jasjam Arabic ROM).
Procedure:
a- Mount your EXTROM using HERMES_MountALLExtROM.cab.
b- Copy the files to the jasjam EXTROM.
. . . 1- Default_ACERT_JSJM_eula.CAB . . . . . . . . . . 243 kb
. . . 2- Default_MultiLang_AR_JSJM_eula.CAB . . . . 755 kb
. . . 3- Default_Imate_WWE_HER_V3.30.00.cab . . . 87 kb *
. . . 4- Default_PT_Reg_FixKeyboard.cab . . . . . . . . . 2 kb *
c- Using File Explorer, run the files and install on the main memory.
*Files 3 and 4 enable Arabic text on the sliding keyboard.
You can install the rest of the suite the same way, or try: http://www.smartnetwireless.com/PocketIslamPPC.htm which is free of charge and can be installed from the computer on the SD card.
Salaam,
You must extract this font.zip in yuor windows directory before you install arabic.
These are arabic fonts.
Best regards
Good luck
Actually it is not necessary to install any extra fonts.
The way I do it is, I install Pocket Islam + Bukhari & Muslim hadeeth packages, I then install the 4 files mentioned above; afterwhich I perform the configuration.
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
uploading the arabizer after upgrading to WM6
GSM system said:
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
Click to expand...
Click to collapse
at this moment, i'm uploading to you the Arabizer of the JasJam after upgrading to WM6. and it's working perfectly on any Rom. tried and working.
here you go the arabic system and also working arabic on keyboard.
Here you go, download the file, extract it. and move it to your storage card, and instal it in order of the numbers as from 1 to 17.
You have a full arabic working system and keyboard as well.
enjoy
http://www.megaupload.com/?d=FF6T44YI
@ GSM system, “Please read the following carefully”.
After installing WM6 and all is well and the phone actually works:
1- Connect through the USB and copy the file (HERMES_MountALLExtROM.cab) to a folder on the phone.
2- Now on the phone, click start menu --> Programs --> File Explorer and find the file (HERMES_MountALLExtROM.cab) and click on it to install it.
3- Once installed, reset (reboot) your phone.
4- Once Windows up and running, you will notice through “Activesync” that you can see EXTROM folder and the files inside it.
5- Copy the 4 attached files to the EXTROM folder to run them from there.
6- Again, on the phone, click start menu --> Programs --> File Explorer and find the ExtROM folder, click on it to open and you will find the 4 files.
7- Install them one by one then reset your phone.
If the above description does not work for you, you need to write a step by step procedure of what exactly you are doing so that we may be able to tell you where you are going wrong.
Q- Are the file format changed when being copied?
thanks Mr. Simple i Appreciate it you brother ... but pleaes where is the file.(HERMES_MountALLExtROM.cab).
thanks to all ... i try to instill all the cab.file i maen the arabic lang but don't work ...i don't know why some device after upgrading to WM6 then instill the 17 cab file the arabic is work okay ...but some device also i-mate ..the arabic is dosen't work ...So ...where is the problem ..if can any one help me ....
best regards
I think with some wm6 roms (like the latest lsvw rom) the device is reset to be an htc tytn device instead of imate jasjam and that what is what is causing the message "cant be run on this device." As u notice when u upgrade to the latest lvsw rom, the device name is set to htc_tytn. This dose not happen on the latest black rom. This is just my thinking why is this happening. I hope someone can solve this issue as I am thinking of going back to black rom.
Salam,
I am glad I was able to help, I have attached the ExtRom mount file.
May I also add that the best version of WM6 for Arabic is LSVW of May 19 which I have been running for the past 4 days without a single problem. http://forum.xda-developers.com/showthread.php?t=307951
I have also attached Tahoma font file (not important).
Good luck.
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Which pocket islam that is best for our device?
Thanks
I think the arabizer software is signed to work on Imate only
Sniper258 said:
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Thanks
Click to expand...
Click to collapse
I think the arabizer software is signed to work on Imate only
My device is T Mobile Vario II which is exactlly like the JasJam and the Tytn ..etc.
I tried more than 7 WM6 ROMS, and many ways of installing the Arabizer. but always
got broaken Arabic letters and the message
"can not run on this device"
Please can you all indicate what are you devices brands. Thanks
The phone I have is an i-mate Jasjam, I have upgraded this phone more than 15 times between WM5, WM6, Radio and EXTROM. This is not the first Windows Mobile phone that I have neither it is the first time I install Arabic, In fact I had a role in Windows 98 and Windows 2000 Arabisation many moons ago.
My current configuration is: IPL=1.04, SPL=1.01 MFG, Radio=1.41, OS=WM6 17913 LVSW, EXTROM=cooked. I do not install a complete ROM, and I always install individual component using MTTY.EXE (except for the radio). Immediately after a new install, I fill in user and device info; I then install the Arabic software. Initially I had a problem with the Jasjam sliding keyboard until I identified files 3 and 4 responsible for its activation.
Please notice that:
1- If you manage to install i mate Arabic ROM (WM5)
JASJAM_Arabic_1.20.305.3_1.20.304.104_1.07.03.10_ship.zip available on ftp://ftp.clubimate.com/ . Arabic should be fully functional and we should no longer talk about hardware. Be very careful, things could go wrong.
2- If you install Pocket Islam suite, you will be able to view and type Arabic using the screen keyboard (there may be a RTL problem when writing Arabic).
3- You can install the Pocket Arabiser Suite from http://www.imaginet-software.com/index.aspx?p=arabizer. It should work with any windows mobile device, but the keyboard will not. You know what to do (files 3 and 4).
4- I am not sure if the Arabisation software checks for a Jasjam signature, if such, you may need to install one or all:
. . . Default_MT_PC_Hermes_Generic_REG_060609.CAB
. . . Default_AHermesKBFlag_JSJM_eula.CAB
. . . Default_PP_KeyBoard_Layout.cab
. . . Default_PP_Version.cab
5- Try a clean EXTROM with only Arabic files in it, in case particular files are preventing Arabic files from running.
6- Try the way I do it (review my previous post) it may work for you then you can uninstall the software you do not need.
I apologize for the lengthy post, but I felt it may be important to a lot of people.
Good luck.
Dear Mr. Simple ....
i am thankfull caz you are Support this sabjact ....i have i-mate JASJAM after upgrading to WM6 no accept Arabic that is the problem ..i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me ..Mr. Simple to fixed this problem ...
with my best regards
@ GSM system,
Do not worry, if it works for me, it should work for you. Try the following:
1- Download the WM5 jasjam ROM from imate site (mentioned in my previous post).
2- Extract the EXTROM.nb file (this is the complete jasjam extended rom)
3- using MTTY.EXE install it to the phone like this:
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 8
3- Ensure you have WM6 (preferably LVSW as it installs the extended rom automatically) is installed.
4- Press (Left Soft Key + Right Soft Key + Reset) all at once and install the whole lot.
5- If it does not install automatically, mount the EXTROM and run Autorun.exe.
I hope you understand that the problem is not in the method/s provided, the problem is in applying them (or your hardware, which is unlikely). Concentrate on using the exact files provided and ensuring the steps are followed carefully.
Now, please notice saying "i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me" does not help much. You need to list the exact steps you are executing, at what stage an error appears and the error message.
If all fails, see if you can install the full jasjam WM5 ROM and if Arabic works for you then, if it does not, you may have a Hardware fault.
Can you also tell us; when you bought the phone was Arabic installed on it?
Important: A large number of this forum visitors are people with issues/problems or with development interests. Please have them in mind and ensure that your writing is as clear and descriptive as possible to help them or to enable them to contribute effectively .
Good luck.
Dear Simple ..
i am so sorry to bother you but i don't have any one to helpe me just you the problem now i don't have the Mtty.exe how to find this ...the my another qustion this mathed do by MS dos or how can i do it this ......
respactfully
@ GSM system,
You still did not come back with what I asked for, a step by step scenario and the error message!!
You need to do a lot of reading, please refer to:http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes and go through some tutorials.
Also to: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG where you will find mtty.exe inside the SPL-1.01MFG_Pack.zip file.
I can only tell you 4 points that may save you time when trying to connect:
1- The file you need to load using mtty must be .nb (like EXTROM.nb)
2- to be able to connect the device must be in the IPL SPL page (color screen) to get there press (Power button + OK button + reset) release the reset then the other two.
3- to be able to connect using mtty you must disable activesync USB connection, do the following: right click on the Activesync icon on the task bar, then click on Connection Settings... and uncheck Allow USB connections.
4- It is best to have the file you wish to upload to the phone in the same folder as mtty.exe.
You are now in dangerous territory, navigate very very carefully; you could end up damaging your phone, what you want to learn is not difficult and already on the forum. Make sure you read the WIKI properly and use the search option of this board.
Good luck.
Hello Everyone!
I had problems with my Ipaq. It has an italian ROM. So I´d like to flash it with an german ROM. On the HP-Homepage i found an italian and a german ROM. But of course it isn´t possible to use the german version. Couldn't anyone cook or dump a GERMAN ROM for the Ipaq 114? I think here are a lot of Germans who would really really appreciate that.
Many thanks!!!
Thomas Further Informations: Isn´t it possible to overwrite the italian nbf-file with the german one???
Got new informations!!!
Instruction to flash:
1.) You need the german and the italian Rom-update. Both have to unpack on your hard disk!
2.) You connect PDA with the PC, but not with the ac-power.
3.) Start the italian Softpaq. Meanwhile the Update the programm will recognize, that the update does only work with ac-plugged
in.
4.) No you rename the Romfile from the german Update with the name from the italian one and copy it to the folder with the
italian Update
5.) NOW plug in the AC-Power Cable
On this way you bypass the country check - this will be done before the checking of the ac-power.
No ideas???
It must be possible... Here are so many "professionals"!!!
By the way: This is a great forum here. Interesting discussions...
Has anyone experience...
...with the instruction from above???
Thanks for supporting
First, I have to say Hello!, this is my first post in this forum. I own an ipaq 110 classic series with WWE(world wide english).
I'have tried many ways to perform a language change, none of them appears to work, at least in this model. The method described above don't work on ipaqs 110 series, because this model only have a mini-usb port in the bottom end; which supplies data connection and power. Then... How I can "connect the AC power" to the device?. O maybe I'm omitting something.
Sorry about my english, I'm from Spain.
First of all you have to forbid your pda the charging via usb.
Use these settings to do this.
When the software ask, reactivate the settings...
Try it...
Greetings!
Bye the way. My english isn´t better. I´m from germany
EDIT !!!!!
SORRY!
It doesn´t work to deactivate the charging funktion. The problem is, that the pda use just one cable for the datas and for charging.
When you start the rom-update the setup programm automaticly start the charging option. The update starts immediatly...
No chance for overwrite the original language rom-file with the one from - in my case - the german one...
Need help! Please!!! It´s very important for me to have a german system (especially for my software).
additional information: i have a spanish model and i need urgently a german one...!!!!
HELP NEEDED!!!
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
uriazael said:
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
Click to expand...
Click to collapse
T H A T `S I T ! ! ! !
Thanks a lot!!! IT work !!!
Now i have the german version!!
You are the best!!!
Need Help To Change Language On Ipaq 110 Classic
hello everyone
I am going to get an ipaq 110 classic from my friend but it is French version, I have gone through this whole article and understand all the steps to change the ROM update for changing language but please someone guide me "WHERE I WILL HAVE TO PASTE THE "HPImage.nbf"
Also please adv if any other important step to follow?
Thanks
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
If you have some further questions send me a private message...
Greetings ThonaV
Need Help To Change Language On Ipaq 110 Classic
hi ThonaV
good morning, let me try today after getting home, sounds like should be ok now. will keep you posted.
thanks for your reply buddy.
kaled
Need Help To Change Language On Ipaq 110 Classic
Woooooohuuuuuuuu
I Have Got My Ipaq 110 Classic Speaking English!!!!
Thanks For Your Good Support Guys, It Was Not Possible To Do This Change As Hp Customer Support Will Never Provide This Kind Of Information To The End Users (of Course If They Start Providing These Technical Knowledge Nobody Will Buy Their Stuff And They Will Loose Chance To Make More Money)
But Thanks Again Guys For Your Great Help:d:d:d:d
Netherlands ROM
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
I have the actually german based ROM (April 2008) and wondering about this symptom:
Always when I connected my "blank" IPAQ 114 to active sync (sync with local Outlook) "and make" a new partnership - the Time on my PDA is "-9 hours" from our local time.
I test this with other IPAQ 114, with other Windows XP, and other AS 4.5 - always the same problem. If I use an other PDA (HTC Touch HD, Pro, S740) all work fine and the time on this devices are correct...
Any Idea what is the timesync Problem with ipaq 114 and active Sync?
the Language settings, time zones are correct on the IPAQ114.
I found a solution for an old IPAQ 6315 :But is that the really solution?
I found out that this is a know problem by HP. There is no current fix, but they did provide me with a work around. The work around is a 2 step process and both must be done before performing an ActiveSync. If not, the problem will become worse by advancing all the appointments in the host's calander. First, in the date and time properities on the PC, UNCHECk the automatically adjuct clock for daylights saving time box. Second, if the IPAQ is located in Eastern Standard Time, set the IPAQ's time zone to Indiana (IN) as they do not observe DST. If in MST set the time zone to AZ. If in CST set the time zone to Saskatchewan, Canada.
greetz joy
Error message on IPAQ 110...
Hello everyone
I need a little help with my IPAQ 110. I have the WWE based rom on it, but when I'm trying to change it I'm getting an error code 203... & the strange thing is - the SKU ID code on rom & device are the same!!! Do enyone had this problem and how I can fix it???
Thanks
Thanks all,
I have the English changed from German version!! I have Ipaq 2490.
You are the best!!!
DubyDu said:
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
Click to expand...
Click to collapse
It seems that there is very different ipaq 114 Dutch
You can try this ROM but it does not work on mine
ftp://ftp.hp.com/pub/softpaq/sp38501-39000/sp38994.exe
I change Language to Portuguese. Great topic. thanks to all.
my iPAQ 114 speak poruguese now !!
Sorry my english
can anyone post here the ROM for english ? i can`t download it
thx
Does anyone here have any idea if is possible to update an iPAQ 116 (that is pretty much the same as the 110 and 114) from WM6.0 to WM6.5?
I have one here but I don't even have it's instalation CD. For some reason I can't connect it by USB, just by Bluetooth.
Any help?
As all we know we have been waiting official wm6.1 rom upgrade and mike-wasowsky named user made a big suprise! he gave us the links of wm6.1 roms for i780. I downloaded rom i780PCSHK3 and modified with an hex editor ( I would like to thank many time to melgurth to show how we can edit exe file ) then I installed rom yesterday night.no more problem during installation and phone is working very well. Now there is a mini guide how to do it;
1.) http://fus.samsungmobile.com/i780/NE/PCSHK/i780PCSHK3_Upgrader_XP.exe
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_VISTA.exe
http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970107&coflag=0 (it is modem driver it needs to be downloaded for xp )
http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970108&coflag=0 ( it is for vista ) install modem drivers firstly then you can install rom exe files.
2.) download an hex editor i preffered HxD as editor like melgurth and choose one of these exe files given above and at the end of last line at editor you will see the version of rom ( it is seen as i780CS) change it with your version ( mine was i780pdxhi1 so u will change that line i780DX) then save as you exe file somewhere on your pc. by the way
3.) Start exe file which is edited by yourself.the progress is shown at pc when rom download is finished then unplug your usb cable and power on your i780 wait for a while and there will come Language settings choose which language you want then system will be in that language
4.) as final, there is no operator settings in system tab it means you have to add mms and internet settings by manually.if there is a cab file for it can you share with us?
5.) screenshots
new screenshots how to edit exe
according to previous post's explanations...
What is the i780PCSHK3 for language? I can't find any codes with CS? It's a provider customized?
yes it is belong to telenord telekom you can choose the language you want after rom installation process. and there is no operator logo or skin. just i needed is to have mms and internet settings of my gsm provider.because there is no shortcut to operator settings.you should enter it manually.i dont know do we have any chance to import a cab file from other version of i780 roms for operator settings?
My mouse stopped working... only DPAD with up/down works...
where could be the problem?
edit:
I have realvga installed. But it worked after some resets. so I don't think there is the problem located. Probably PQzII (for scroll buttons remapping)?
What I also noticed is that when I push an icon in a menu it scrolles to the bottom :/ only pushing longer on an icon it opens the tool...
.. try typing a COMMA (, .. the one on the righ side of the space button) - you will get a "ä" instead of the COMMA.. any idea how to fix this please?
Thanks for your post, but the XP upgrader link not working. Can you provide anyother link ? Thanks
Yes the XP Link seems to be out of order I mean what is the size there is no information of the file size. Keeps on downloading endlessly! Please upload the XP ROM to a downloading site and post the links. Benveq did you use the vista rom or the xp one? Which is better?
Thanks for the links.
it appears the xp link is dead, the file is not available at server.
Please post the new link...thanks
Hello
There is also the German language?
Can you update on the German 780 update?
Can someone has a step-by-step instructions make?
Greeting Stanly1902
benveq said:
.......................
2.) download an hex editor i preffered HxD as editor like melgurth and choose one of these exe files given above and at the end of last line at editor you will see the version of rom ( it is seen as i780CS) change it with your version ( mine was i780pdxhi1 so u will change that line i780DX) then save as you exe file somewhere on your pc. by the way
Click to expand...
Click to collapse
I have pda part as i780PDXHI1 and the Phone Part as i780PUHJ2 should I edit to i780DX or to i780PU ??????
Having problems downloading the XP versio of the ROM. Please can some one post it at some other site?
try this one
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_XP.exe
BR
Yes this link works
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_XP.exe
Download speed is also ok with the help of a download acclerator
There is this link ,which has a cab file for operator(internet/wap/mms) settings.
http://forum.xda-developers.com/showthread.php?t=340586
I dont know if it works with i 780
Quick Guide
1. Download ROM from
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_XP.exe
2. Open the file (EXE) with winrar in a new folder
3. Open CSHK3_XP.EXE with HxD editor
4. From search menü: replace i780CS with i780DX (I used DX since I was using DXH1 as the PDA Part) save and replace CSHK3_XP.EXE file
5. Run setup.exe for the USB drivers and the other setup from unpacked new folder to install modem
6. Start CSHK3_XP.EXE (which you modified) and rom begin upgrading eboot+PDA+Phone. Detect Phone ( Tick mark all the components make sure device is charged fully and you have synchronised with active sync)
7. After upgrade completed and i780 restart set language and the device is ready
8. SPB Backuped up file from old rom insures you get the settings back.
9. Enjoy with new ROM and post any shortcomngs problems here.
Thanks to XANADU!
inertiax3 said:
.. try typing a COMMA (, .. the one on the righ side of the space button) - you will get a "ä" instead of the COMMA.. any idea how to fix this please?
Click to expand...
Click to collapse
Yes you are correct get this funny beahviour when try to type "," Any fixes any one????
Can you guys change your key mappings in personal/Buttons?
Message and GPS button (always opens Meessaging) do not work correctly after remapping them...
strange
I also am not able to drag n drop via DPAD ?!
please use function+sms for comma.........
dbsoundz said:
Can you guys change your key mappings in personal/Buttons?
Message and GPS button (always opens Meessaging) do not work correctly after remapping them...
strange
Click to expand...
Click to collapse
Could this be a problem like it is with the comma?
shailyait said:
please use function+sms for comma.........
Click to expand...
Click to collapse
thanx, that works .. but is it possible to change the HW keyboard layout somehow?