Related
Any help Pls???
a regular install ??
have u tried installing the arabyising suite from imaginet, regularly... ?
u mentionned previously u would install a w2003se, is such a rom available ?
I'm downloading the Arabizer from Imaginet now and will install it as soon as the download completes, but I doubt it will work properly as it is made for windows mobile 2003 and not 2005.
Unfortunately ther is no such Rom "2003" for Jasjar.... if it were there, it would have been much much faster and reliable.
Regards,
Khaled.
arabizer from jasjar extended rom
u can get the arabizer cabs from the erom of jasjar, i have them i can send them via e mail , i think they r too large to post as attachements here. my email is : [email protected]
salam
dr. mohamed eldardiri
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
they worked properly with me
i installed only 3 cabs , successively : the one with 1- acert, 2- acert2 , then 3- Ado , in this order, with no interruption inbetween, then i reset , it worked properly, i didnt use other cabs , as i used third party dictionary and calenders and stuff ... so i only installed the cab of my local provider , so that i be able to use wi-fi, everything is ok now. i installed the old imaginet arabizer , but it didnt work at all , and i hard reset.
one question though , i need to know how to use the arabic hardware keyboard as there s no alt key.
salam
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Mohammad,
One of our room mates suggested me a solution, I tried it and it worked better than the default Arabizer which comes with the original old rom .
If you're interested to view the solution you can access it from this link:
http://forum.xda-developers.com/viewtopic.php?t=43213
Thanks again for your valuble support.
Regards,
Khaled.
arabic hardware keyboard
hello khalled
i was wandering if the new arabizer suite u installed supported the hardware arabic keyboard, coz i failed to use it using the default cabs. i knew that the shortcut keys are (shift+Sym) but it didnt work ...
salam
Hello Dr. Dardiri,
I installed the Arabizer from Imaginet web site, and I can tell you that it's much better than the one came with the I-mate rom.
But unfortunately I tried the hardware Arabic Keyboard but didn't work with me.
I will report this to the i-mate website support and see the result.
Salam,
Khaled.
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
FoRmaTiTo said:
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
Click to expand...
Click to collapse
Try This, it works on my 838Pro ...
Hi,
thanks a lot for this file. I get the same error message trying to install this one as with mun_rus one...
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
Any ideas what I could do?
Thanks!
FoRmaTiTo said:
I'm using the AUS WM6 no SPL found in this forum.
Click to expand...
Click to collapse
Maybe your ROM is lokked by default. So try a cooked version from this forum and it just works.
I've installed it on SEA version thanks for share.
I was able to install the comm manager hkkk888 posted. Thank you! I had to stop the comm manager trough task manager first.
Thanks again!
Now I'm only missing the dialpad(s) and I'll be a happy man...
Can anyone do a screen capture to show how this Comm Manager skin look like?
I would like to change the one on my Trinity WM6 too. Also, if anyone can show me a dialpad with video call button will be great.
look like this
http://www.mobile-review.com/pda/review/image/htc/elf/screens-official/scr05.png
The comm manager posted before dissapears after a soft reset and leaves me with a blue colored one...
The one I am posting stays after soft reset. Not sure, but the font on it looks more blurry...
DIAL
Dial Sceen?
ROM cookers/Devs
I understand from other threads that the issue with the dial pad is that the kaiser has 3g codecs that differ from the trinity/other htc devices, which means the 3g video call button on this dial pad does not work.
My question to you guys is; how easy/hard would it be to change the dial pad so that the action/function call behind the 3g video call button doesn't call the 3g codec/action we don't have but calls the video call function that we know we can use...?
Regards,
different dialpad from wm5?
If wm5 dialpad should work on wm6 you can try one from Hermes, works for me in wm5.
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
ztuzz said:
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
Click to expand...
Click to collapse
Guys, Whoever face this problem, just restart your device and do not start any program before installing this comm manager. The reason you get this error because, your existing comm manager is running and this file cant overwrite the running file.
hkkk888 said:
Try This, it works on my 838Pro ...
Click to expand...
Click to collapse
The WLAN keys are different for 838 pro and Trinity and so for other HTC devices. The Comm Manager for Hermes will definitely NOT work for Trinity (For WLAN and Data Connection)
I don´t know about data connection, but the WLAN button DOES turn the Wifi function on and off on my device.
Still looking for the dialpad
The AUSDIM "modified official rom" does have the dialpad/comm manager I want... I´ve sent him a P.M. asking if he could share them but no luck yet...
Maybe he can/will post them...
Thanks!
There you go...
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
FoRmaTiTo said:
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
Click to expand...
Click to collapse
Wrong. Here is a nice black dialpad - finger operable - I believe it ma be the one in AUSDIM's ROM - but it has no Video Call support - the only downside. It does update the pinpad entry, too. It says Wizard - but I have it installed on my trinity - works fine.
nealed, thanks. It's great, more finger friendly than other dialpads.
Hi,
I upgraded to the official Dopod WM6 ROM. Is it possible to install the Kaiser Home Plugin on it and where can I get is as a standalone app and not part of a whole ROM package (don't want to reflash again and reinstall everything )
yes, it works fine, here you have it.
sorry for the newbie qusetion but when u download these cab files where do i put them on my artemis device. Is it in the windows directory?
you can put the .cab file anywhere you want in your pda,
open "file explorer", locate the .cab file, and "click" it. it will install the software to the default location.
enjoy.
thanx bro, much appreciated
Now to the dialer skin Will the Wizard one work?
Edit: In fact it works like a charm
does this also work on my htc p4350? i have installed the cab and he shows nothing on where the clock and everything else should be. it only looks like the original htc homeplugin was moved down
HELP ME PLEASE
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Tried but did not work
Hello there,
I installed the Cab (install to: device) on my unlocked X02HT with dopod rom.
Turned the device off and on again but no change.
I am using FuseSP and PocketDOS and still both have this annoying numeric keyboard problem
Or does this hack only fix the Yahoo Go and WLS issues?
On my HTC S630 it fixed the problem I had with Yahoo Go, I really don't know if this fixes other apps (this should fix the input problems in the textboxes in .Net bassed apps, but I haven't tried any other) and if this works with other ROMs apart from HTC's one, I guess is just a matter of testing it.
The instructions that I have from that forum are:
- copy the .cab to your phone
- run the .cab with File Explorer to install it
- restart your phone (or shut it off, then turn it back on)
- it should work after that
It worked!
Hi,
I am using softbank X02HT with Dopod C730 ROM. This fixed the input bug with Yahoo! Go.
Thank you so much for this fix! I'm always grateful to smart ppl that come up with things like this!
Yus
does not work somehow on my x02ht dopod rom
as mentioned before i tried it with my x02ht with dopod rom. i did not try it with yahoo go but with other apps i had this numeric key problem with and there was no change...
funny thing is i can install the .cab file as often as I want to. It looks like it installs fine. And then just for fun if I click the cab again after reboot it installs it again. It does not tell me it is already installed even after installing it for the x-time. Is this normal? I tried to installl to device and storage card. no change.
Cheers
xsl777 said:
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Click to expand...
Click to collapse
It runs on my dopod c730.
How about Gmail mobile? I can input my username there...
anybody can help?
Worked like a glove! Solved problem of the apps that treats letters as shortcurts and dont write!
Thanks a lot
need yahoo go for c730
i need yahoo go for cavalier, is there any link to download this ?
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
gimbong said:
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=432946 and read how to app unlock your device.
Also these would be very helpful http://forum.xda-developers.com/forumdisplay.php?f=415&nojs=1#goto_forumsearch, http://forum.xda-developers.com/showthread.php?t=298893
Cheers
Hi,
im pretty new in this forum. I found out what nice tweaks and apps there are for xperia x1, which you guys just made and i just can tell from vidz and pics, you did a excellent work by far...but:
I saw the tilewave panel for x1 in this forum und tried to install. I already installed other panels like home ui and touch3d earlier, so i know how to install *.cab and choose in panel manager. My Problem with this here, the tilewave, is, that i cant choose it in the panelmanger. I tried several different panalmanager version, like the one for x2 or the SE, but there is no success...
My general question ist: What is required to use the tilewave panel on X1?
Do i need a special rom for that? by the way: what exactly is a rom ? ^^
Before you guys flame me, that i could use the search engine: i did. But everthing i found here is talking about roms or that everyone claims the tilewave panel is easy to install on x1.....And i'm not in all these Rom things either...
I really would like to have this panel, so plz plz help
Some infos:
- Rom Version is: 1.05.207.13 and installed on 5.12.2009...
- After trying to stop all panel manger processes, to install the x2 panelmanager and try with this, i coulndt find any processes in taskmanager but couldnt delete the old panalmanager archive...so i just isntalled the x2 PM....
- the x2 panel manager works really fine, but i cant choose the installed tilewave panel, there is none with that name....
Ok, a little update right now:
I installed a prozess manager to kill the panel manager process and could reisntall the x2 panel manager without any errors or bugs...
The X2 Dialer and the x2 Task Manager could be installend without any problems...
somewhere i found myriad java installer and installed that too, because i hoped it is neccassary for the tilewavepanel...but still no success, the only thing which doesnt work is that tilewave panel..its installed in the right archive (Programms/Panels/) but i still cant choose it from panel manager.....
Plz Help ! ((
Allright....after tryn around the whole day, yesterday....i found out, that the registry entry, which leads to the panel, is wrong...it willl normally registered in "/Program Files/Panels/Tilewave" but if your language settings differs from english, like my german does, you have to change all registry entries there. in my case to: "/Programme/Panels/..."
If anyone got the same problem, i hoped it help....
I got now the problem, that, when i click on messages button in tilewave panel, it zooms in and out, but nothings happens. i quite couldnt find a solution in the forum, so does anyone know how to get this fixed?
I have to edit my informations a gave here....i dont have isntalled any rom, the version of what i have, is the normal firmware i got...(see above in first post)
The Message Button still dont works...
I installed Active X Deploymend and the slideview seems to be installed too, its under "Programme/Slideview
Is it neccassary for a wm 6.1 Xperia X1i (is what i have) to install Slideview in order to use tilewave?
If so, i had problems installing it the manuel way: I had problems to copy all files in /windows/ because the file is in use or allready exists....
All other problems (like time- +1hour) could be solved, but just this little ****ing messages button cant be fixed (((
Plz help, thought you where professionals
allright party- people...after days and days messing around with that problem, i decided to play a last card on my hand and flash my device with a custom rom.
Although i'm absolutly not into that stuff, i viewed your tutorials and see: everything works fast, fine and stable! I have now the Touch it Xperience Ver.12 with additional tilewave panel installed and did the registry trick to fix the hour-faster- problem... it works perfektly ! I think my earlier problems where because of my firmware version (original sony, not a custom..)
I'm so glad right now, about the beautiful,fast and usefull new interface! You people do a great job here and i'm happy there are people like you doing it without any financial afford.
So thx again (altough you didint help me in this post here ;-)), and special thx to Biovolt for his very easy going and usefull tutorials (video+text) and itje for the very nice Touch It v.12 rom !