Do I get an unlock code after performing the unlocking batch. I didn't see any . It just insormed me to wait till my phone does a soft reset.
I tried to place a t-mobile SIM and the plone asked me for an unlock code.
Am I missing anything here ?. Thanks
Related
Hi All,
I purchased a Siemens T-mobile unlocked phone on eBay, and just received it.
The phone is not unlocked and it doen not reads my current SIM ,
however on the face of the phone there is one sticker that says , "UNLOCK CODE xxxxxxxx" There is an eight digit number which is the unlocking code i guess.
I wanted to know how to go about unlocking the phone.
Any help would be appreciated.
Thanks in advance
Amank
SX56 unlocking
The SX56 is a HTC Wallaby, if I remember right. Since you have an "unlock code" on the device, give that a go first. Insert a sim card that it should not work with (due to the simlock) and start the device. It should then ask for the unlock code. Enter the 8-digit code. If it's accepted, you are done.
I used to have an SX56 (among other wallabies). Some were locked, but I never unlocked any of them with a code. You can do it without that. Grab the "special" rom from the FTP here (/Wallaby/ROM/) and flash it on the device. When it boots up for the first time, it will ask if you want to unlock the phone. Click yes, and it's done. After that you can flash any other rom you like, the lock doesn't come back.
There is also a simple exe that you can run on the device to do the same thing, but some files need to be present on the pda, so it might not work with the current rom.
In any case, you should be able to do it, especially with the code and all.
I want that program please
GSC said:
The SX56 is a HTC Wallaby, if I remember right. Since you have an "unlock code" on the device, give that a go first. Insert a sim card that it should not work with (due to the simlock) and start the device. It should then ask for the unlock code. Enter the 8-digit code. If it's accepted, you are done.
I used to have an SX56 (among other wallabies). Some were locked, but I never unlocked any of them with a code. You can do it without that. Grab the "special" rom from the FTP here (/Wallaby/ROM/) and flash it on the device. When it boots up for the first time, it will ask if you want to unlock the phone. Click yes, and it's done. After that you can flash any other rom you like, the lock doesn't come back.
There is also a simple exe that you can run on the device to do the same thing, but some files need to be present on the pda, so it might not work with the current rom.
In any case, you should be able to do it, especially with the code and all.
Click to expand...
Click to collapse
I want that program to unlock one that i have, mi email is [email protected]
hi all
i have 2qty dash and 2 unlock codes
but one is unlocked
another is still locked
i got unlock code again, same prevoius
what's wrong with my dash
need i flash it?
i tired putting couple of unlock code
for tilt htc 8925
and it says please wait for time out ...
how can i make it work ? i dont want this to show cuz i already got the correct Unlock code.
i got four unlock codes for my s III. how do i use the provider unlock code??? will it unlock the phone permanently??
Power off the phone, put in a sim from another carrier, enter your unlock code when prompted to do so.
Where did you get the unlock codes? Normally, only one code can sim unlock the phone.
audit13 said:
Power off the phone, put in a sim from another carrier, enter your unlock code when prompted to do so.
Where did you get the unlock codes? Normally, only one code can sim unlock the phone.
Click to expand...
Click to collapse
i got the codes from unlock.my i used the network unlock code to use a different sim card but there is supposed to be a way to permanently unlock so that i can just put any sim in it and not need to do a network unlock everytime. the codes they gave me are:network unlock, provider unlock, sub provider unlock, and defreeze
skyline66 said:
i got the codes from unlock.my i used the network unlock code to use a different sim card but there is supposed to be a way to permanently unlock so that i can just put any sim in it and not need to do a network unlock everytime. the codes they gave me are:network unlock, provider unlock, sub provider unlock, and defreeze
Click to expand...
Click to collapse
Once the phone is unlocked using the network unlock code, it will be permanently unlocked. The other codes aren't necessary unless you hard lock your sim and phone.
Thank you
Since T-Mobile will release a temporarily full phone unlock, isn't there anyway for a developer get the bootloader unlock and sim unlock source from inside the phone since it's unlocked? It sounds weird that developers take months to get a sim unlock and the carrier can do an unlock any way they like. There should be a method to push an unlock on any android phone remotely. Do i make sense?
A sim unlock has nothing to do with a bootloader unlock. T-Mobile SIM unlocked my S22 the day i got it, a few days before release.