Does anyone know how to switch off/amend the screen modes on an O2 Exec.
I have Destinator 6 which is running slowly and I was wondering if it would help the software by switching screen modes.
Hi,
What GPS unit are you using with Destinator 6?
Cheers,
Bryson!
I am using an old fortuna clipon bluetooth GPS.
i tested out iGO 2006 the other day, that has the option to run in QVGA but it ran an 1/8th the speed of vga, i was very supprised it behaved in this way
bryson said:
Hi,
What GPS unit are you using with Destinator 6?
Cheers,
Bryson!
Click to expand...
Click to collapse
im using tomtom GPS 5 its work perfect
Related
Has anyone tried Navigon MN5 with Artemis yet?..........
Thanks
Rafiki
I did.. Navigon works fine, but is really slow on my Artemis. TomTom is much faster. I tried Navigon because of the TMC support, but i can't get TMC to work on my device. I'm going to try iGo 2006 as well, but for now TomTom does the job very well.
Now I'm using iGo 2006. I can recommend this piece of software to everyone, it's much faster than both TomTom and Navigon. The looks are incredible.
My tomtom takes ages to find the sats when you first boot it up. Is this normal??
tmaxx said:
My tomtom takes ages to find the sats when you first boot it up. Is this normal??
Click to expand...
Click to collapse
Try to find the upgrade to v6.02 as this has the option for "Built In GPS" and it'll then use the Quick GPS data. Cold start is now 10 seconds for me with warm start being about 3 second!
Navigon 6
Navigon 6 works fine, but it is really slow on Artemis, is there anyone knows how to turn the first warning off in the begining of screen ?
Does iGo support QuickGPS so that it can lock on fast?
A cool nav program is Route 66. Works fine and gets a fix in approx.10 sec. Uses same maps as Navigon btw!
TomTom is a joke if you live in Eastern Europe. Either no maps at all or very poor with only very major roads.
I only work with DestinAtor on my Artemis. Version 6.0.0.
Very fast fixes (approx 6-9 seconds) and response from map is better then TommyTommy, according to a friend of mine. He switch over to DestinAtor aswell.
TomTom GPS Settings...?
low405 said:
Try to find the upgrade to v6.02 as this has the option for "Built In GPS" and it'll then use the Quick GPS data. Cold start is now 10 seconds for me with warm start being about 3 second!
Click to expand...
Click to collapse
Guys can someone tell me what settings they have on their Artemis' GPS Settings and on their TomTom 6.200?
On my Artemis' GPS settings, I have it set to:
GPS Programs Port: COM4
GPS Hardware Port: COM2
Baud Rate: 4800
Manage GPS automatically set to: ON
And on the TomTom settings I configured it to use the Other NMEA GPS Receiver, set the baud rate to 4800 and then when it asks "GPS is connected to:" I just select COM4 which is the first option.
Now this works for me pretty well but the weird thing is my HTC P3600 seems to be a lot quicker at getting a fix and it has connections with more sattelites and a better signal than the Artemis!
As far as I know, the artemis is suppose to be much better when it comes to GPS because it has the latest Sirf 3 GPS receiver and from what I read somewhere, the P3600 has another GPS chip not as good as the Sirf 3.
Would be good to know what settings everyone else is using. By the way TomTom only seems to detect the GPS when the GPS Programs Port is set to COM4 on the Artemis' GPS settings. Setting this to anything else doesnt work.
Thanks in advance.
D.C
Hello, I put the Navigon 6,2 software on my P3300 today. Awesome stuff. The update 6,2 has improved the Speed alot.
The only thing that i need help with is the TMC service.
how can i get that up and running?
Thanks
Tim
Hi,
I'm currently running navigon 6.1.5 on my P3300 with WM6 (NewArtemis2). Every now and then I'm getting the message that my memory is full. At that moment I can choose to end different programs. Normally or MN6 or phone. Because I'm using navigation I choose telephone. Then after a few minutes I'm getting a network faillure and MN6 ends.
Is this a known problem and if it is, is there a sollution for it?
Thanks for your help.
Paul
Bringing up an old topic again.
I tried to install Navigon MN6.2 on my artemis. Everything goes well, except for the images on the screen, it's far from smooth.
How did other people manage to run MN6.2 to run smoothly on there Artemis?
Greetings all!
I have become the owner of an XDA Orbit and have not taken the kind people at O2 up on their offer of navigation software, but am using my existing TTN 5 software. It has installed perfectly and it works excellently on the external BT GPS, but I need to know how to get it to work through the built-in GPS.
Does anyone have any instructions and port settings to get the TTN5 to speak to the on-board GPS receiver?
All help gratefully received.........
Fucawi
Other NMEA GPS/ GPS Baud rate 9600/ GPS on COM4 - Mike
Thanks Mike, it works a treat (even better than my Leadtek BT GPS). I 'm sure it wouldn't have hurt O2 to put that in the manual.
Keep up the good work.
Hi Guys
I have been testing out some gps sat navs for work...tested with holux bt gps
So far I have the following which are compatible not compatible.
Destinator... works fine, however will sometimes struggle to pick up signal and requires a reset.. Otherwise all other functionality works great. Sometimes freezes when in 3d mode. (Most of these were true for wm5
Igo Myway plus- Will install on wm6(eventually) however seems to have a memory leak that causes it to slow down to nothing.... Very impressive gps sat nav on wm5. Better than most of the others I tried...
Will add more when test the other models.....
If anyone else can update me with thier info / experiences, please go ahead.
The Garmin Mobile 20 (GPS 20SM) works fine with both Windows Mobile 5 and 6. It is a Bluetooth GPS that supports using Bluetooth for receiving GPS information, and for the speakerphone, but for some reason insists on using the external speaker of the phone for navigation directions. (Or so it seems, I didn't have it long enough to do full testing).
The one problem that it seems to have (at least my unit does - I am awaiting a RMA replacement) is that it will not charge my Cingular 8525, unless I perform a soft-reset after connecting the mini-USB connector. I am hoping that it is a problem with the particular unit that I had, as I really like the Garmin products. (I suspect that it may be an issue with the product itself though, as it will charge a T-Mobile SDA, as well as an old Nokia phone not capable of Bluetooth. The 8525 does charge flawlessly when connected to a PC via mini-USB, or the supplied AC adapter, so I'm sure that it's not a problem with the phone).
-- Joe
Edit: After re-reading this, it appears you're using a generic GPS and evaluating software that works with said unit. The Garmin software pretty much only works with the Garmin units as far as I can tell, so it might not be an appropriate solution for you.
TomTom works flawlessly.
Currently i'm on v6.03 but i used 2 previous versions on WM6 with no problems.
Side note, i don't know if its because of v6.03, or WM6 but this version takes a little longer to acquire a valid GPS signal when initially turned on.
MioMap 3.2, TomTom 6.3 & Destinator 6.2 work flawlessly for me...
Destinator still has the tedious lock up issues... other then that MioMap is the best...
walshieau said:
MioMap 3.2, TomTom 6.3 & Destinator 6.2 work flawlessly for me...
Destinator still has the tedious lock up issues... other then that MioMap is the best...
Click to expand...
Click to collapse
does Miomap have voice commands, or just on screen instructions only? Do they make maps for USA?
marscandybars said:
does Miomap have voice commands, or just on screen instructions only? Do they make maps for USA?
Click to expand...
Click to collapse
Both quests = Positive.
Hello,
I am wondering if AX3L_OS_v3.1.2_LITE_fixed.rar is a GPS enabled rom. I cannot seem to connect using TomTom version 6.010. If it matters, my radio version is 1.50.08.11 and I am in the US.
TomTom Settings :
GPS receiver : Other NMEA Receiver
baud rate : 9600
GPS to com9
Thank you in advance!
Palermitano said:
Hello,
I am wondering if AX3L_OS_v3.1.2_LITE_fixed.rar is a GPS enabled rom. I cannot seem to connect using TomTom version 6.010. If it matters, my radio version is 1.50.08.11 and I am in the US.
TomTom Settings :
GPS receiver : Other NMEA Receiver
baud rate : 9600
GPS to com9
Thank you in advance!
Click to expand...
Click to collapse
But why don't ask this in the AX3L ROM Thread???
Don't you think AX3L will help you better?
Oh Yea it works!
Palermitano
AX3L 's AX3L_OS_v3.1.2_LITE_fixed.rar works the GPS great! I have less than 50% memory usage before kicking off the TomTom 6. It's been the fasted operation I have seen on the Trinity.
I'm using the TomTom 6 from HTC and maps from everywhere. It's a lot more stable than WM5 and I'm seeing a lot less memory card corruption. (4gig SD from TopRam)
What you might try is VITO Navigator II v1.3 to trouble shoot the problem. This little app can auto find the GPS module in the Trinity and give a display of all viewable sat's in about 5 seconds. There is no enable or disable needed, that app will turn on the gps and start working. It can even show you the raw data stream coming down.
TomTom has too much over head to trouble shoot with.
Been playing with GPS units for 8 years now, Palm3 to Sony N70 to HP 5450 and now Trinity.
hi all is that possible i use Imate PDA2K as GPS
plz tell me any kind of help....
tnx in Adv:
AddAn
Yes it is. It works with most major GPS applications, TOM TOM, Handymap etc. You just need a bluetooth GPS receiver. I use it is my primary GPS device.
of course... just buy a gps receiver, garmin should b a good brand for it as well as the software.
Yes with BT GPS receiver it works like a charm. I'm using garmin software and BT138 (4 years old). I've also tried TomTom, IGO and others but because my specific needs I'm using garmin.