MDA Pro Dead!!!!! - JASJAR, XDA Exec, MDA Pro Software Upgrading

I upgrade ROMs of my TMobile MDA Pro, and when arrives at 99% of stage 3 they say that have and error...and my MDA Pro is dead, no light, no image...no bootloader...
Is possible to repair or i must to sen to technical service?
Thanks a lot!!!

You should be able to goto bootloader mode by pressing power+backlight+reset.
If not than send it on warranty

I try to go to bootloader...but nothing happens...I live in spain. Nobody's known where the technical service is?
Thanks a lot!!!

Are you sure that your battery is charged?

i did one thing that worked for me.
1) take out the battery
2) plugin the pda to AC 5 minutes.
4). unplug the pda from AC.
5) put the battery and reset.
6) now you should be in bootloader mode.
7) upgrade again.
good luck

I try, but its still dead...I starts to think that the only thing that I have is a nice paperweight...

Related

Help me!!!! How du update my Universal without USB.

Hello Universalowners!
I got a really big Problem. My Universal falled down 4 month ago. Because of that the USB-Connector broke out. Till yesterday that was no problem. My Universal worked pretty good. Under Windows, I was able to connect to my device by Bluetooth.
No here comes my problem.
Yesterday I booted up my device and I dont know why, it came up in bootloader mode.
I tried every key combination, but it does not reboot back to windows. Even Both softkey+reset does not work.
My friend owns an universal too, and we tried to back up his rom to sd card with mtty. The d2s command is locked on his device. There is no chance to backup his rom to sd card.
That would be my only chance to get my universal back to life.
The change of the usb connector would cost me a lot Euros.
I really don´t need the usb connection if I have a running system.
I charge my batteries by an external device and everything else I can do by bluetooth or infrared.
So please tell me, what I can do, to get my problem solved. I heared something about the tool itsutils.exe with rapi enabler on my friends device. But I really do not know, how I have to handle this.
Could someone send me the image, which I can write to sdcard with my laptop?? Please help me. I need my universal like the air to live!
Hope I will get a soon answer from you!! Thank you in advance!!!!!!
Don't o2 Germany do an insurance plan like o2 UK?
If I were you I'd buy the connector for the Euro or so it will cost, and solder it in myself. But of course, if it goes wrong you'll have fried your XDA with no backup. Can't you just call o2, take out insurance, then about a month later, "Lose" it?

Returned MDA Pro for Repairs

Hi,
Today I returned to the T-mobile shop. I deliverd my dutch MDA Pro for Repairs.
I have the following complains:
- Battery dies at 54%. Very anoying.
- Calls are not clear, sometimes I cant understand anything someone say. I have a bad reception.
- Device is slow. You all know it.
Befor I returned my device, I took out my SIMcard, Memorycard and Stylus. I flash the latest dutch t-mobile rom (1.30.233) to my device and gave it a hard-reset.
The woman at the story told me I should receive a call in 10 workingdays to pick up my device. I'll let you know how it turns out.
Sharky,
IMHO Your Uni is ok. Battery issue was described many times over the forum and its connected to wornout battery. (In Your case Youll should get new battery after a repair so its good point)
Bad reception is propably because old radio rom - have You tried to upgrade it?
Slowness is a personal matter - mine is sometimes slow also but it depends on soo many elements thats its hard to define what precisely is slow.
Anyway how will You survive whitout Your Uni - its a question ;-)
best ,
Piotr
nabuhonodozor said:
Anyway how will You survive whitout Your Uni - its a question ;-)
best ,
Piotr
Click to expand...
Click to collapse
I know I can't. I just hope nothing goes wrong with my device, at least before any of the clamshell PDAs start to roll out. I would hate to buy another Universal, just to see a new version the next month.
BTW wats ur result after the upgrade did it solved ne of the problem .

My MDA Compact III - DEAD to the WORLD :(

Hi All,
I have been reading through as always trying to give the kiss of life to the recently (1month) upgraded MDA Compact III. I have upgraded it from WM5 to Touch Flu WM6. It has been working great till last night it just died on me and now I can’t even turn it on... It comes on if i leave the battery out for a 10mins and then put it back in, but it will only go far as the boot screen and as soon as it comes to the password prompt it dies
SO I can’t get in to the bootloader...
Any help will be much appreciated
Thanks all
Kind regards,
DS
sanath121 said:
Hi All,
I have been reading through as always trying to give the kiss of life to the recently (1month) upgraded MDA Compact III. I have upgraded it from WM5 to Touch Flu WM6. It has been working great till last night it just died on me and now I can’t even turn it on... It comes on if i leave the battery out for a 10mins and then put it back in, but it will only go far as the boot screen and as soon as it comes to the password prompt it dies
SO I can’t get in to the bootloader...
Any help will be much appreciated
Thanks all
Kind regards,
DS
Click to expand...
Click to collapse
Just to clarify, if you do the sequence to put it in bootloader mode, it still wont come on? What if you have it connected to the computer, still no power?
I had that same problem
Well not to be the messenger of doom but it may eventually die for good, i dunno what causes this but the same thing happened to my xda orbit recently. I had it for about 7 months the 3 weeks ago i had that problem to fix it i would leave a battery out for about an hour, also it seems the more programs u have it seems the more crashes it has, not saying hard reseting fixes it just when i installed the touch 3.01 rom and installed as few programs as possible it didn't crash for a week but, last Thursdays picked it up turned it on started listening to music then it just crashed and wouldn't even turn on at all when i plug in the charger the light didn't turn on or anything taking it to the o2 shop tomorrow.
shawndh said:
Just to clarify, if you do the sequence to put it in bootloader mode, it still wont come on? What if you have it connected to the computer, still no power?
Click to expand...
Click to collapse
This is correct... I leave the battery out and then after about 20mins i ut it back in then it will come on for a bit, but then it will go dark screena nd nothing will happen... very strange...
Infuruno said:
Well not to be the messenger of doom but it may eventually die for good, i dunno what causes this but the same thing happened to my xda orbit recently. I had it for about 7 months the 3 weeks ago i had that problem to fix it i would leave a battery out for about an hour, also it seems the more programs u have it seems the more crashes it has, not saying hard reseting fixes it just when i installed the touch 3.01 rom and installed as few programs as possible it didn't crash for a week but, last Thursdays picked it up turned it on started listening to music then it just crashed and wouldn't even turn on at all when i plug in the charger the light didn't turn on or anything taking it to the o2 shop tomorrow.
Click to expand...
Click to collapse
Ohhhh man... i think i have to take my one to the t-mobile shop and get it repaired
This suxzzz
Hope you get your one all sorted...
I have tried everything... this is now DEAD!!! I have managed to even upload the BB4.2 to it but after about 10mins it dies and never come alive again... wired...
if anyone have a solution other than taking it back to the supplier please let me know
thanks
sanath121 said:
I have tried everything... this is now DEAD!!! I have managed to even upload the BB4.2 to it but after about 10mins it dies and never come alive again... wired...
if anyone have a solution other than taking it back to the supplier please let me know
thanks
Click to expand...
Click to collapse
I would think if u were to claim u may still be able to claim from the warranty if flashing it doesn't void it i sure hope not but i also insured mine so if the warranty is void i still have a life line.
i also have the same problem... i have upgraded to wm 6, first day was OK. i put my arte in my back pocket... when i took it out, it was shut down.... first i thought that it was because i sat on it... but it didnt open after that... when i plug charger it doesnt charge... however i managed to charge the battery fully... if i take the battery for a period of time.. it seems to work but crashes again, slowly going in black screen with a green vertical line in the center...
what should i do? please help me... unfortunately there's no htc shop here in turkey...
Sending it back to T-Mobile
I just called T-Mobile and have to send it off to the repair centre. Apparently i have a 24moth warrantee on this phone... Let’s hope they replace the phone
sanath121 said:
I just called T-Mobile and have to send it off to the repair centre. Apparently i have a 24moth warrantee on this phone... Let’s hope they replace the phone
Click to expand...
Click to collapse
I am affraid that you lose the warranty because u flashed (updated) your orginal ROM.
Mayby damaged is only storage of ROM - memory chip
i didn't lose my warranty on mine maybe because they couldn't turn the phone on to check it out properly, i just got it back yesterday with the official o2 rom and no questions asked. b4 u take it back if u can flash the official T-Mobile rom then their shouldn't be any problem i would think.
I have same problem can someone point me in the right direction for the rom please same phone

[Q] DHD brick and guarantee help

Hi Everyone !
I have a Desire HD and it bricked last sunday evening. It's only half year old, so I took it back to T-Mobile (I bought it from them). But it's rooted and Radio S-OFF-ed when died. Can the service establish that I rooted and S-OFF-ed my phone, or no ?
Thanks in advance !
If it's totally dead (no bootloader access or charge light) then they won't be able to tell. They'll fix it without any knowledge of software changes.
Sent from my Motorola Startac running Atari 2600 software!
Yep if its completely dead they wont bother repairing it, they'll just replace the motherboard. That way they have no knowledge of what you did to it.
Thanks for the answers,I'm happy right now,because you have the point:absolutely no sign of life. No charging light,no bootloader and no any happening when I press the power button (same with another battery too).
how did you manage to do that? It will be good for others to know so that they dont make such a mistake .
meeru said:
how did you manage to do that? It will be good for others to know so that they dont make such a mistake .
Click to expand...
Click to collapse
I don't know. Here's what happened:
1.: I use Opera Mobile for web browsing and the past few days it's become very slow. Sometimes the only way to close it is press the Home button and close it in task manager. I thought it's a software problem, so I made a hard reset, but it's not resolved my problem. Mean while I saw the news that HTC will not refresh the Desire HD to ICS in the first line, so I downgraded it and flash the latest NDT MIUI ROM.
2.: Next day I connected my phone to my PC and realised there is no communication between, only charging. I tried it in other computers and other USB cables, same result, so I wanted to back to stock. My only problem was the Radio system. I was still S-OFF-ed. I searched so many forums and I tried to get back Radio S-ON in Terminal Emulator, but it didn't work.
3.: Tried some instructions without any result and finally after a reboot procedure the phone didn't wake up anymore. No reaction for the charger, no reaction for any button pushed. Nothing. Took it back to T-Mobile and they check the battery because they thought maybe that caused this and they said it discharged over.
And now I'm waiting for an SMS or call how is my phone now
goodluck with that
Got it back from repair service. They changed its motherboard,so almost I have a brand new phone now I'm so lucky I guess ... huhh ... sweating a lot,but now I'm happy
SsZzliMm said:
Got it back from repair service. They changed its motherboard,so almost I have a brand new phone now I'm so lucky I guess ... huhh ... sweating a lot,but now I'm happy
Click to expand...
Click to collapse
Good job mate
Sent from my Desire HD using xda premium
SsZzliMm said:
Thanks for the answers,I'm happy right now,because you have the point:absolutely no sign of life. No charging light,no bootloader and no any happening when I press the power button (same with another battery too).
Click to expand...
Click to collapse
If you plug it into your computer in that state, does it ask for qload usb drivers? if so, Its a true brick, and there's no way they'll know what you had going on. I had mine replaced in June this year after mine was bricked.

My GT-i8160 is dead

Hi!!!
First of all I want to apologize me for my English and I didn't find a thread with my problem or something like that.
The question is two days ago I received from Samsung one upgrade to my mobile software, and I installed it and my samsung galaxy ace II is dead now. I can't turn it on or turn it on in the recovery mode, it's like a stone. I bought my mobile in Spain, and I think than the upgrade was for UK, because I live in UK now, can this crash my mobile?
I tried to flash it with Odin and I tried to use Kies of Samsung but nothing happened!!Because my computer doesn't recognize the mobile. It's a beautiful stone :crying:
Someone has any idea and can help me? I have a lot of personal information inside of my mobile and I'd need to recover it.
R.I.P
You do not have maybe ace 2 logo? If not, try charge your battery, If that do not help I think it's hard brick
Thank you Alwer ,
No I don't have nothing, I tried to charged the battery but it isn't work. I'd like to know if there are anyway to turn on when is hard brick.
May be retire the battery from phone and charge extern energy electricity.
After try to turn on the phone in "Download mode". If is ok, so use Odin.
PD: Sorry, my English is not good.
Try to find someone with a RIFF Box (for instance) nearby to you... Other JTAG Boxes may also work...
Im sure your ACE2 can be repaired.

Categories

Resources