Hi!
Flashed my Siemens SX66 with Uni_Simlock 1.0 but received a problem. Instead of succesfull flashing with Radio 0.0.0.0 by MaUpgradeUt_noID.exe received an error on 3% flashing progress bar and now SX66 says No GSM on startup instead of Radio 0.0.0.0
while flashing everything was turned off (Kaspersky Antivirus, Agnitum Outpost) I was using ActiveSync 4.2.0 build 4855 on IBM laptop with latest software, SP2 and all possible critical updates installed (also have .Net 2005 install to compile a few C# projects)
Siemens SX66 PH20B1
I'll be very grateful for help,
Please advice,
Thanks
Siemens SX66 is BlueAngel, so Universal utilities would not work there.
Related
Has any one managed to update an imate PDA2K with the latest rom. I have tried the up date trick in the forum
[CHECKCEID_TYPE]=1
But I stll get a Country ID Error?
Hrlp
I have upgraded my XDA 2s from o2's original FW to I-MATES latest,
It took several attempts! I kept getting ID error 212212122 kind of thing.
I then tried a USB 2 computer as my USB 1 comp wasn't cutting it and kept resetting the machine half way through :/ thought i'd turned it into a brick, but once i'd tryed it 3 times on USB2 it finaly worked! And I had to add the extra line that you did as well, keep trying
Make sure you know what your Original Firmware is! otherwise you'll be trying to install the wrong FirmWare or ROM update.
Check the wiki, beginners section, search my posts.
I'm now running I-Mate latest FW. its ten times better than O2s old one!
best I can do hope this helps. choppidge.
Upgrading iMate to Latest O2 Rom
Thank you for the advice. Did you upgrade from iMate to 02 or O2 to iMate?
My machine is a USB 2 machine and no matter how may time I tried I got the country ID error.
In the past I have managed to update my iMate to the O2 Rom with previous versions, but when I have tried to update my iMate with the latest ROM I get the Country ID Error -12121212 etc.
Has any one manage dto put the latest O2 Rom on an iMate Blue Angel?
If so please tell me how.
You need this ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
put it in your upgrade folder and round it , should be no problem , I did o2 to I-mate and Dopod to I-mate n times already.
if got the error on the 1st run with the no-id, run the no-id 4 the 2nd time, it works 4 me, i've flash my pda2k to o2 1.40.00 WWE :lol:
Hello,
I use a 'boss-provided' BlueAngel that came complete with installed software. The only program I (am allowed) to use is a SAP client (written in Java) that connects to the server using movianVPN and GPRS.
My problem is that I am an engineer and not happy with the base setup. I can change everything, flash the ROM, read and write the ExtROM, reinstall the SAP client (I have the CAB's on my laptop) but I cannot reinstall the movianVPN because I do not have the installer. And by boss will not give it to me since I am not to mess with the pda in the first place.
So my question is: how can I isolate what files/DLL's/regkeys are used by movianVPN (V4.01 build 117.4c), so I can keep using the VPN function after a hard reset? I want to build a cab file for this too, so my complete software can be restored from the extrom after a reset...
Sannie
---------------------------
Qtek 9090 a.k.a. BlueAngel
ROM: 1.40.00 WWE
Radio: 1.15.00
ExtRom: 1.40.730 WWE
I have a XDA IIs and I have tried the upgrade.
The first stap I have upgradet the last ROM "Helmi Rom AKU 3.5" and all OK. Only I had some problem with the blouthoot. To try to resolve this problem I hase upgradet the RAdio version from 1.13 (original) to 1.15 ... from this moment the panic:
- The Phone don't work. I don't able to go on the pphone section
- The contact don't run
- The calendar don't run
- When I go un the setting phone and i do the Network search the prone find my service operator (TIM) but don't register on the network. I curiosity is that if I send a sms to my pda the sms is delivered on PDA ?
- The activesync don't syncronize
After I have tried to downgrade to the radio version 1.13, ba nothing to different
What can I do ?
Can anybody help me ?
Thanks
first then bluetooth have no relation to the radiostack the stack is only for the gsm part
good reads
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
http://wiki.xda-developers.com/index.php?pagename=BlueangelFAQ
or use search for blueangel forum "radiostack" or "radiostack AND downgrade"
or something like it
Thanks Rudegar.
I have read the doc.
I have again:
-udate rom to "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek"
- update radio to 1.15 Type II method
I have always the same problem.
When the pda start a error popup appair can help to solve (i think):
"the file 'phoneservice.exe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file"
where can i find the correct installetion for this file
Thanks a lot
Luigi
Your Upgrade
The udate rom to "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek isn´t for the XDA IIs. It´s only for the Blue Angel Device. Downgrade your Device to the original-rom and look in the community to an rom-upgrade for XDA IIs.
mcpunicorn
mcpunicorn said:
The udate rom to "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek isn´t for the XDA IIs. It´s only for the Blue Angel Device. Downgrade your Device to the original-rom and look in the community to an rom-upgrade for XDA IIs.
mcpunicorn
Click to expand...
Click to collapse
Error, XDA IIs is a Blue Angel! It's only another name for Blue Angel
Hello all...
I've seen LOADS of questions relating to this particular model and upgrading to WM6, both on this forum and throughout the web.
I followed instructions from here, but alas I couldn't get the PDA to accept the new ROMs for various reasons. (I.e. ROM Sink Mismatch, Incorrect Model, Incorrect Version).
I then found this page burried in the links of the above thread, and tried the WM6 upgrade from it... I don't know if it's the PDA4 or the PDAViet ROM (or another altogether), but the big thing is: it works! Bluetooth, WiFi, Battery Indicator, Activsync... everything I can find to test works.
Now... I had originally got Windows Pocket PC 2003 with the device... I upgraded to WM5 using the official "WM5 Upgrade" from the HP UK website... I updated the firmware and drivers for WM5 from the same site, then I applied the WM6 ROM from the link above in White Boot loader mode.
One quick restart later, and now it's working...
So, thanks to all from the massive thread, thanks to the person who made that site, and thanks to whoever made the ROM
Loq
HX2750, WM6.5 Bluetooth Radio Problems
Hello,
I've installed Spaaitjies WM6.5 V4, and trying to run TOM TOM 7 on my iPAQ HX2750, I find that the Bluetooth Radio cannot be turned on. The error message that pops up reads:
"The Bluetooth Radio failed to turn ON due to insufficient driver memory available. You must perform a normal rest before you can turn ON the Bluetooth Radio"
So, naturally I've reset the device (soft & hard) but the issue remains. Can anyone advise what I might try next?
Many Thanks,
Gareth
Hello,
I have searched hours to have a blackberry client working on my Artemis :
- have tried many versions
- have tried different ROMs from Meschle
Everytime I have same result I cannot connect to Blackberry and the black berry client does not show any service...
Anyone have HTC P3300 (Artemis) with working Blackberry client?
Please advise I I really need this for my work...
My current configuration :
HTC Artemis P3300 unlocked
Meschle's ROM 4.02 Lite w CUBE
I live in the czech republic and my SIM card is a T-Mobile one with all services activated (BlackBerry + Edge...)
Thanks
---
Jeremy
look in this thread
http://forum.xda-developers.com/showthread.php?t=369269
Dont work
Thanks for reply but I already read this post among many others it does not work on my Artemis... still cannot connect or get an IP...
How to know which version of radio i have? is it on boot screen?
Thanks
I have an Artemis and I am using the blackberry functionality successfully. Here is a site where you can find all information about HTC and blackberry:
http://sems.org/entry.asp?ENTRY_ID=276
Under Start-Settings-System-Device Information you can find all information required about the OS etc. of your Artemis. I use the 03.07.90 Radio version and it works fine for me. I use the Artemis Touch 3.01 Rom. Apparently nobody has been able to run the blackberry connect under WM 6.01.
For me it was crucial, to ask your IT department to re-activate my Blackberry account. Before, nothing worked and since then, it is quite stable. I use 4.0.0.97.
Hope this helps.
WM5?
Thanks a lot for reply.
So are you advising me to flash my device with a ROM containing WM5?
I would do it if I find that I can use BlackBerry as this is very important for me...
Are there any big differences between WM5 and WM6? Would I lack anything by downgrading ROMs?
Currently I have Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Lite)
Thanks again.
---
Jeremy
As mentioned, Blackberry connect does not work with WM6.1, but does with WM6. I am using
Artemis Touch 3.01 Rom
which is based on WM6.
All OK
So I downgraded ROM from 4.02 Lite WM6.1 to 3.01 Lite ...
Then I installed BB Connect (same version as you as all others don't work with this ROM and my device)
Finally I got the everything working!!! What a releaf !!!
Thanks a lot!!
Nevertheless I am looking forward for next ROM from Meschle which will be compatible with newer releases of the BB Client...
Best regards,
P.S. I also tweaked registry in order to save my corporate emails to storage card instead of main memory!!
P.S.2 : Didn't you notice that your device is slower after installation of black berry services?
How did you do the tweak of the registry?
In some instances, my Artemis has become slower, sometimes it even seems, it hangs up. But it seems that this is the price to pay.
BTW, HTC and RIM have now entered into a strategic partnership and all future HTC models should be automatically provided with Blackberry connect. Thus we might see an updated version of Blackberry connect sonn, that also works with WM6.1.
...
Hey,
Thanks for update...
I have modified the registry this way :
1- add "PropertyPath" value="\Storage Card\Mail" datatype="string"
to this place in Registry : HKLM\System\Inbox\Settings
*** Note : Do not put quotes in the value... ***
*** You can edit registry with many editors such as PHM or TRK ***
2- Create a folder Mail in on your storage card
3- Copy whole content of \Windows\Messaging in the new created folder \Storage Card\Mail
4- Finally after you do this make sure that you take away the messaging today plugin from today screen (important... you can put it back after soft reset)
5- Soft Reset
-----------------------------
I have another problem now with the BB Connect. Since I installed it everything is fine just I have to unlock my phone every 30 min using a password. This is very annoying as you have to open keyboard and enter password everytime you dont use your phone for some time...
Do you have this as well?
Is there any way to disable locking of phone?
Thanks
Solved
I have solved the password issue :
I downloaded MEMMAID application which is able to manage system services and I manually stopped the BlackBerry Security service.
Be careful though this is a powerful piece of software which can really harm your device if misused...
advice : do not change the service startup type (auto/manual) just stop the service after each Soft Reset otherwise you will not be able to use your device after soft reboot.
I managed to get my Blackberry Connect working on my P3300. Here are the details:
HTC P3300 (purchased in India)
Artemis Touch 4.02 ROM
Radio 3.08.90
Blackberry Connect Version 4.0.0.97
Device Id set to HTC_P3300
HKLM\System\Version\AKU = .0.3.1
Carrier = Airtel India (http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/BlackBerry/)
Connecting to BES on Exchange at company workplace.
I see email, calendar, notes and contacts synced from my Outlook.
Thanks to all for the data/input on versions/radios, etc.
tip
Hey,
I updated ROM (6.1) and for some reason the connection would last few seconds and then I would loose IP address...
Long time I didn't know what to do and even going back to original working ROM it didn't work...
Finally, I deleted my internet connection and soft reset.. HOP the connection was up and running again
So now I will add again my internet GPRS connection (for www and other games/weahter...) and will see... Probably I have to setup some sort of exceptions in the lists to prioritize BlackBerry somehow...
Cheers.
BTW, BlackBerry works with WM 6.1 ! Also there is new version 4.0.0.100 which works as well for me.