i am a new user of i matepda2k some times i get the number not the name is there any solution for this problem
it means their number is not blocked and you do not have a name associated to that number in your contacts. Cell networks unlike landline CID's do not send the account name just the number.
thank u ver much for your rapid response but,
this problem is temporary ,some times occur and some times not, although i am saving those number in my contact list under specific contact name.
thank u again
It happens on my PDA2k also. Sometimes it displays the number of the incoming call and if I wait a few rings (sort of giving it time to look up the name) it then shows the name from the address book.
I had this problem when I was running M$ Voice Command.
OK after I uninstalled
Try to disable the Caller ID by moving the shortcut from the \Windows\Startup to other folder and reset.
I'm using Caller ID v1.20 and the name of the file I moved is IA_CID_StartUp.lnk. If you are using other version, the name of the shortcut may not be the same.
Hope this will work for you as it work well with my Xda IIs.
i don't have this voice command
i found 2 files which one should i disable
ia_caller_id.ink
ia_cid_startup.ink
or should i remove both?
thank u for ur help
Remove ia_caller_id.ink
You've installed both versions of caller id (1.17 and 1.20), that doesn't work...
i am still having the same problem
I'm having the exact same problem, and I had hoped there would be a solution for it here... Still none?
I have installed SEA WM6 very well... But, there is no Caller ID at all... Only Caller number appears when receiving or dialing new calls... Tried searching and reading everywhere since yesterday with no luck...
Please help?
BTW. even before installing any software the problem exist!!!!
Go in a contact, you will see an option like mobile number for pic
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
How does the phone know more than the number of the caller if not in contacts???
I was thinking of the way my landline phone (yes, I still have one of those, but I may be canning it soon) gets its Caller ID information. Verizon just sends it down the line to the phone. I thought T-Mobile did the same thing, the service just sends the necessary info down the line to the phone, but I thought that was a given (Caller ID) with wireless phone service. Maybe I'm mistaken, which maybe someone could clarify for me?
Now to me, what I'm getting seems like "partial" Caller ID, the number without the name? Or maybe I'm just totally confused on it all, been a rough week...
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
I didn't mean Verizon's wireless service, I meant their landline service.
Never mind, went over to T-Mobile, that's the way it's sent down, number only. Thanks.
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
I thought I was having that Problem..
but im now having the problem with the Pictures not coming up.
tdavis75 said:
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
Click to expand...
Click to collapse
In Canada Rogers offers this service. They call it Name Display
^^^^^^^^^^^yup dont forget fido too lol
I am using S2U2 and a caller ID program so that I get the info about callers wich are not in my phone list. but when the phone is locked it just flashes the id for half a second
anyone know how to get the caller id displayd until you answer?
Hey ill just get right to it. My provider is Fido Mobility. Im using an unlocked LG Nitro HD (LG-P930). I switched to this phone after my last was destroyed.. anyways my problem is that about 80% of my incoming calls dont show their caller id (yes i have caller id set up on my plan), the name sometimes comes up as jibberish (ex. D*ʘ2ɅkɅΔT$aJ) but the number is always unknown. I tried calling Customer support but they simply said they dont have any codes or what-not to give out that would fix my problem. so I ask if anyone here can help me out..