Related
Hi all,
I am quite new here, so please don't kill me at start
I have my Audiovox PPC 4100, primary dedicated to AT&T network, but unlocked and now used in Poland. It has Pocket PC 2002 os installed. Is there any way to upgrade it to wm2003 (if yes - any link to how to and roms will be welcome)? Was looking through forum archives but find something about "let's make audiovox group" or "will it work", but there is no good answer there I experience some problems with this device - signal is low when not in center of the city or inside buildings, some sound problems (already installed anatek sound patch, but I am not sure if it works any better), and personal certificates problem (wm2003 solves it).
Also, what is the relation between Audiovox PPC 4100 and SP230? Is it the same, or not? Does any one finally install sp rom into audiovox?
Thank you in advance for any help and patience
I have a audiovox too
i think Sp230 the same 4100
If u have a rom of Sp230, sent it fome plaase, i will flast it
Oh get me a flast tool please.
thanks
@all,
while having worked with the good old mdacompact1 I have collected a rather professional knowledge about the gadget.
Recieving my german artemis or rather hero (it doesnt have wlan) I am in need of your help with the following:
1.) howto dump/save the orig. rom?
2.) howto install wwe rom ( can I use the one from wiki?)
3.) howto increase storage by deleting ext. rom, (similar to mksbigstorage under ppc2003) ?
4.) any failsave way of unlocking the simlock of the german gadget?
many thanx for your help
ok, so maybe i am a bit early with my questions; ill just lay back and see what happens!
any idea thou on changing the language to wwe (english) ?
if not, anybody interested in buying a brand new german hero?
Kozhura,
I download ROM image for IPAQ Hx2000 that you fixed from forum :http://4pda.ru/forum/index.php?showtopic=35871&st=330
AKU3_52_hx2000FIXed_by_kozhura.rar (http://4pda.ru/forum/attach/903449/AKU3_52_hx2000FIXed_by_kozhura.rar
My questions are:
1. What is the different from Misar's AKU 3.52 hx2000.rar (http://rapidshare.com/files/27089928/AKU3.52-hx2000.rar.html)
2. Is this English version?
3. Can it be used to upgrade IPAQ hx2750 from AKU3.5hx2000?
Thanks, Tri
I didn't know that someone already did this! Can you describe the tools that you used and the procedure? I want to include greek language in rom.
And is it possible to have Wm6 for hx 2000?
I also have a iPAQ 2750, same problem that is can be upgraded the ROM?
And I have also hx2750, and I want upgrade wm2003 to wm5! How can I do that?
Unable to update the ROM
Hey guys.
When I try to upgrade the ROM, it failed to initialize some dll file and I see a message in Ipaq saying "Digital Sign Mismatch"
Any idea ?
anavas said:
Hey guys.
When I try to upgrade the ROM, it failed to initialize some dll file and I see a message in Ipaq saying "Digital Sign Mismatch"
Any idea ?
Click to expand...
Click to collapse
Do u use Kozhura or Misar's version?
What is the type of your Ipaq? previous version of os?
I used Kozhura version, but I tried the original version too, I haven't tried the other version
The OS I have is the 1.0.0.1 H downloaded from HP's website, I am having hx2795
will this work with a 2490?
And for 2490b? I tried both but I get an error "Incorrect device SKU" I know that have some advices in 4pda, but I cannot understand cause I don't know russian. If anyone knows or can translate them this will be very helpfull.
Same here, they even have some comments about "Digital Sign Mismatch" but I couldn't understand, I tried google language transfer, but no use,
I think we have many members from Rusia, so Is there any body can help to solve our problem ?
abbaml said:
Kozhura,
I download ROM image for IPAQ Hx2000 that you fixed from forum :http://4pda.ru/forum/index.php?showtopic=35871&st=330
AKU3_52_hx2000FIXed_by_kozhura.rar (http://4pda.ru/forum/attach/903449/AKU3_52_hx2000FIXed_by_kozhura.rar
My questions are:
1. What is the different from Misar's AKU 3.52 hx2000.rar (http://rapidshare.com/files/27089928/AKU3.52-hx2000.rar.html)
2. Is this English version?
3. Can it be used to upgrade IPAQ hx2750 from AKU3.5hx2000?
Thanks, Tri
Click to expand...
Click to collapse
Dear Abbaml,
I'll try to answer your question since I'd already flashed my HX 2750 usung Misar's & Kozhura's ROM
1. The differences between Misar & Kozhura is wifi connection. Though I haven't found it yet.
2. Yes,this is English Version
3. Sure, I've done it myself.
Hope it help.
anavas said:
Same here, they even have some comments about "Digital Sign Mismatch" but I couldn't understand, I tried google language transfer, but no use,
I think we have many members from Rusia, so Is there any body can help to solve our problem ?
Click to expand...
Click to collapse
Dear anavas,
I flashed my Hx2750 (WM5 english versionby HP) with kozhura's rom. The steps is :
1. Clear reset the hx2750 (Press Calendar, power and message button). While still press those button, lightly press reset button with stylus.
2. Sync it with your computer using craddle / data cable
3. Take out your ipaq from the craddle. Press contact + itask button + reset button. Your ipaq will come to bootloader. Put it on the craddle.On the bottom left it will show usb connection. Press calendar button. Now at the bottom left it will show USB.
4. Run the HPRUU from the rom (misar's / Kozhura's). Your ipaq will begin flashing.
5. Do the clean reset once more and your pda will be ready to use
Hope this 'll help.
I flashed succesfully my hx 2490b with the aku 3.5.2 rom. Necessary was to download the sp32408 rom from:
_ftp://ftp.compaq.com/pub/softpaq/sp32001-32500/sp32408.exe
run it and when I saw this screen:
to go to the directory that the RUU utility extract its files( usually c:\ipaq\sp32408) and replace and overwrite the nbf file with this from aku 3.5.2 rom(before must rename the nbf file with the name of sp32408 nbf file)
The other steps is as described before.
bug report:
I flashed the 3.52 AKU rom and found that the activesync of exchange server is unavailable.
When you press finish in latest step of setting up the exchanger server, the setting will never been saved.
edcom said:
Dear anavas,
I flashed my Hx2750 (WM5 english versionby HP) with kozhura's rom. The steps is :
1. Clear reset the hx2750 (Press Calendar, power and message button). While still press those button, lightly press reset button with stylus.
2. Sync it with your computer using craddle / data cable
3. Take out your ipaq from the craddle. Press contact + itask button + reset button. Your ipaq will come to bootloader. Put it on the craddle.On the bottom left it will show usb connection. Press calendar button. Now at the bottom left it will show USB.
4. Run the HPRUU from the rom (misar's / Kozhura's). Your ipaq will begin flashing.
5. Do the clean reset once more and your pda will be ready to use
Hope this 'll help.
Click to expand...
Click to collapse
Edcom,
Thanks, will try the different.
But many users reported that a2dp bluetooth NOT working,....thus we can't use our bt headset. Have u tried yet?
Hi Guys.
Thanks for your update, Do you think the following will work on the new ROM
a) WiFi
b) A2DP
c) Sync over Exchange Server
d) Credent Biometric Finger print reader (cause I have hx2795)
Also how much memory left once you flash the ROM, is it faster than the HP ROM ?
A2DP Bluetooth
abbaml said:
Edcom,
Thanks, will try the different.
But many users reported that a2dp bluetooth NOT working,....thus we can't use our bt headset. Have u tried yet?
Click to expand...
Click to collapse
@abbami---> Sadly I haven't try A2DP bluetooth, since I don't have the device.
anavas said:
Hi Guys.
Thanks for your update, Do you think the following will work on the new ROM
a) WiFi
b) A2DP
c) Sync over Exchange Server
d) Credent Biometric Finger print reader (cause I have hx2795)
Also how much memory left once you flash the ROM, is it faster than the HP ROM ?
Click to expand...
Click to collapse
@anavas--> a. Wifi works great. d Biometric finger print reader also works flawlessly (I have Hx2750). For b & c, sorry haven't try it.
hi,
I will test the b & c today
thank you
And wm6 from 4pda. See here:
http://forum.xda-developers.com/showthread.php?t=329079
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hi to all ... please to answer at one question ..... i search the internet yesterday and today and i read a lot of tutorials from wich i learn a lot of things about how work this awsome device .... it's my first htc and my first windows mobile phone and i'm proud of my choice ( but this is another story )
..... my diamond have a branded ROM , a vodafone one , and i want to install a new ROM - WWE 7.5 FULL ..... especially i want to change the language , because now is german , i'm roumanian , and i want english on it : )) ... well done i downloaded all necessary files to start the job ..... but my enthusiasm was knocked-out because i meet the next screen ( see the photo )
so....what should i do ? and what am I doing wrong ? ... i follow conscientios all the instructions :
- battery is full
- usb cable is well connected to PC and Phone
- standby and hibernate modes are turned off
- i have a correct ActiveSync connection between Phone and PC .... including Outlook
so if you will tell me what to do i will be verry gratefull
thanks in advance
have u downloaded and flashed the hard spl? if not do it...
see this http://forum.xda-developers.com/showthread.php?t=416211
i just attach a photo....the problem was because the server don't let me , as a new user , to atact an external link to a photo sharing site .... excuse me for this mistake
this is the step where i remain...the first step....i was'nt able to pass hard spl
uhmmm i never saw this error...
Put it in bootloader mode and try again
and how can i put my diamond on bootloader mode ? ..... by pressing volume down and reset keys in the same time ... and will appear a screen with some text informations and 3 different colors ?..... I do this few hours ago and then i lose a lot of time to do my phone work well again ...are you sure is this exactly what i need to do ?
sorry for this words , maybe you are an experienced member of this comunity and you don't deserve this , but i want to be sure
use internal storage method...is easy...in the rom you download there is a file .nbh rename it to diamimg.nbh then copy in the root of the internal memory
soft reset then hold the back button and the vol down button...follow the instruction on screen...and if you want do a hard reset after...simply soft reset then vol down + central pad button...follow the instruction..and you'll be ready
Salutare...
Salut ...id ul meu de mess este t_john87 ...adauga-ma si te invat eu cum sa-l instalezi..si ti recomand si o versiune buna de rom..eventual ti-l dau prin messenger...depinde ce vrei..in engleza...romana...6.1 ..sau 6.5 ..bafta
BladeIonut94 said:
hi to all ... please to answer at one question ..... i search the internet yesterday and today and i read a lot of tutorials from wich i learn a lot of things about how work this awsome device .... it's my first htc and my first windows mobile phone and i'm proud of my choice ( but this is another story )
..... my diamond have a branded ROM , a vodafone one , and i want to install a new ROM - WWE 7.5 FULL ..... especially i want to change the language , because now is german , i'm roumanian , and i want english on it : )) ... well done i downloaded all necessary files to start the job ..... but my enthusiasm was knocked-out because i meet the next screen ( see the photo )
so....what should i do ? and what am I doing wrong ? ... i follow conscientios all the instructions :
- battery is full
- usb cable is well connected to PC and Phone
- standby and hibernate modes are turned off
- i have a correct ActiveSync connection between Phone and PC .... including Outlook
so if you will tell me what to do i will be verry gratefull
thanks in advance
Click to expand...
Click to collapse
i have sppl 1.93 0000 and i try all the tutorials finded on xda about how to change to 1.93 signed by olinex and every time i get an error and when i went for a tutorial to solve that error i face another obstacol ....it seems like my last chance to change that damn sppl version is to use something called NBHUtil ... but i don't understand very well how it works so if someone will be so gentil to explain me in details this "easy" procedure this will be my last question
please post a solution and thanks in advance
LE : i learn how nbhutil works and still no result ... what else can i try to change this damn spl because i'm sick of vodafone branded windows and it's german language ... ...my diamond is Diam 100 so it shouldn't be so hard to "work" with it... but it seems like nothing want to work