I did a CID Unlock Flashed it didn't update. Went back to Cingular original Rom looked ok then flashed again still no update of ROM # to 2.17
Cingular 8125
Please disregard post issue was resolved due tp a failed CID unlock. After unlocking updated ok
Related
Hi All,
My P3600 is stuck in bootloader after trying to install the official D810 ROM. I used the CID unlock install first, which seemed to work fine, I then tried to install the D810 ROM and it looked like it was working, but stopped at 28% with some kind of communications problem. Recovery does not work... it displays the progress bar, but then goes straight back to the rainbow bootloader screen.
Any help or suggestions appreciated.
Thanks
Rael
Phew... got it working. I removed the battery and replaced, boot loader was still displayed, and then ran the old official WM5 update which seemed to progress from 0 to 100% sucessfully.
Thanks
Rael
Your phone was relocked by the update, and I'm guessing you don't have an actual D810 that's supposed to get this update. The best method to flash this is to follow my post here:
http://forum.xda-developers.com/showthread.php?t=316410
oops, you can use hard SPL in this link:
http://forum.xda-developers.com/showthread.php?t=299659
i got the problem like you when i upgrade my device to wm6 officiel.
After you flash hard SPL Olipro, you can use PC to flash again another rom you like.
(sorry for my worth english)...
People just do NOT know how to read...sigh.
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
I've noticed it the other way around, I first HardSPLed it with v1.40 and some later I flashed v1.93 (I think at least twice), without any error, but the flashscreen still says v1.40. Never had any problem though ...
Can't help you with the SIM unlocking, haven't tried it yet.
with the spl im mostly concerned because one day i might need warrenty and if it says 1.93.olinex..someone will probably suspect..
To Sim-unlock it doesn't matter you have HardSPL(Olinex) 1.40 or 1.93. The most important is your radio, you mut have the Diamond_Radio_1.00.25 intermediate to accept the SIM-unlock proces. Look at the thread .. unlock (sticky) and get the file - Radio downgrade - then you go. The error 226 is related to the radio version !!!
eranyanay said:
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
Click to expand...
Click to collapse
just flash this Spl : http://forum.xda-developers.com/showthread.php?t=400402 and then your problem is solved use the first zip download it worked with me
I have the following:
HardSpl: 1.40 Olinex Unsigned
Radio: 1.09.25.23
I ran Security Unlocking software provided by Cmonex. but after 100% reached, the window on PC shows 'ERROR[226] FLASH WRITE'
and the phone screen in tricolor shows 'UPGRADE ROM CODE ERROR'
What do i do?
I flashed the ROM i was using & my Diamond is working now, but how do i Security Unlock it?
Cmonex mentions that support is provided only if i donate!!
reflash your original rom as this http://forum.xda-developers.com/showthread.php?t=413910
and after do step1- step2 and step3
Got info from some other website:
Did the following:
1. Flashed back to HardSPL 1.23
2. Flashed back to Radio 1.00.25.05
3. Flashed DiamondSecUnlocker - Procured from cmonex with pm
4. Flashed 'DESIRED' radio
5. Flashed back HardSPL 1.40
Done, all went smooth..
i face the same problem....but how to use sec unlocker??
i did the same
but did not need to downgrade the HardSPL
and i accidentally re-locked the phone afterwards, lol
i was angry with myself
hayyaan said:
i did the same
but did not need to downgrade the HardSPL
and i accidentally re-locked the phone afterwards, lol
i was angry with myself
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=4956372
so, anyone has any idea to solve my case?
Pretty new to this but I've deceided to upgrade my desire s to ics. I unlocked to bootloader via the instructions on the HTC dev site(did i need to do that). Went ok but when i tried to update to the wwe ics ruu it failed, came back 'ICS RUU security fail - update fail' error message 155- the blurb saying it could be the wrong rom or it's too big. I've definitely got the right rom. Don't understand. Anyone got any ideas? My phone is locked to the o2 network.
Many thanks. PS it recovered ok.
Search here, then if you can't find you answer post again there, you'll get better responses.
Apologies didn't realise this was in the desire and not desire s forum. posted in a rush. I've solved it now.... it seems htc stock roms can only be installed if the bootloader is locked. I relocked it and it was fine.
I converted my M8 to a GPE edition a few days ago and so far everything's been working ok. When I did the conversion, I needed to change the CID (GOOGL001) and I'm assuming its all worked ok as I flashed the phone with the 4.4.3 ruu and the phone then updated itself to 4.4.4 through an OTA update. The phones not rooted, S-Off has been reversed and I've re locked the bootloader.
The problem I now have is when I try to use recovery to update to 5.0.1, which from what I've read, should be possible. before I can select the update file I'm getting 'Check CID failed' and the phone just reboots back to android. I've been googling the issue and cant find anything specific... any ideas?
Given this is happening now, when the OTA update does arrive, is this going to cause me problems?
Link us to the thread where you found the 5.0.1 update zip/file your trying to use.
Why would you go S-ON after being S-OFF ?