I tried to set up a set of BT Stereo Headphones in a shop the other day to test them. We couldn't get them to go so we could listen to mp3s. I use GSPlayer.
Has anybody done this successfully? How do you tell the Magician (WM5) to output the sounds to the bluetooth headset and not to the normal headphones audio output socket?
many thanks,
Zaine.
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Bewdiful.
Bewdy mate.
Thanks very much, that seems to do the trick. It works with my normal headset now. I'll go back to the shop now and test those other headphones.
The auto toggle seems to work OK as well, btw.
Once again, thanks a million.
Good deal. I gotta try this out. Will this work w/ the Wizard?
It doesn't work with my Magician + BHCS BT Patch...
I've read plenty of threads about this. For Magician, A2DP is WMP only. Doesn't work with anything else.
Mind you, this is what everyone else has said. I have not tested this myself.
I can confirm that, in my experience.
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Ik am succesfull with the standard WMP though. It plays all bitrates, and only rarely stutters... So when I use WMP, I am satisfied!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Nice triple post! But...
bobgorila said:
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Click to expand...
Click to collapse
Yeah, I got this all the time, espically if I fast forwarded and rewound. And I was re-encoding mp3s to different bitrates, constant and variable without much success.
"Damn WMP and it's lack of features! The stupid thing can only play MP3s... and... WMA..."
I did a few test re-encodes to WMA 9 (not 9.1) @ 192 and now I get those burps and crackles every ... ten minutes? Half an hour? Definitly not every... what, twenty seconds to a minute.
If this is a problem for you, try re-encoding to WMA 9 @ 192. I use dbPowerAmp http://www.dbpoweramp.com/
ooff! took me about 2 and 1/2 days to re-find this thread again!! can we get a sticky on this????
used this on my Wizard (aka mda) and my Moto H3 and now can listen to my tv shows on the train w/my bt headset!
thanks!!!
I got a Unable to Open bluetooth audio gateway or something, though my headset is connected...strange.
blue tooth program
thefrioman said:
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Click to expand...
Click to collapse
There is three icons one for audio off and one for audio on and one for toggle.
I ran one at a time but after 15 or 20 minutes I loose blue tooth connections and the communications manager freezes and when I click on the blue tooth Icon in settings it does nothing, I have to turn the mda off and then I can listen over the blue tooth again, but after 1or 20 minutes it does it again.
can you help?
help
is there any one out there
BT Audio User Problem
I downloaded BT Audio and installed the three .exe files on my 8525. Soft reset the device and then toggled the audio on.exe. Sound still coming out of the speaker and not the BT headset.
I do have the BT-620's and they work fine (even before the BT Audio install). I am trying to accomplish being able to listen to WM without having to lug the BT-620's around all the time.
I am wondering if having the 620's software is conflicting with BT Audio?
Also, I think to get the audio stream to play to the headset, one has to activate the voice dialing feature from the headset? I can get the sound to play only for a few seconds when I do this. Do I need to de-activate voice dialing? If so, how?
Thanks and Happy Holidays
Wokring great with Plantranics voyer 510
Thanks for such nice software....it is working great in my mda and voyer 510 bluetooh head set.
imate JAM Arabic
Please I am needly imate JAM Arabic for Rom 1.12.00WWE .
Please help me .
and thank's for every .
NIce
Thank you so much, toggle works well, switches to calls and back
very cool.
hi
couple days ago i bought thisd stereo BT headset, looks very nice, but i have one big problem, first time i have connected this headset everything was OK, it was clearly found by Universal, shown both of options to use it as HF and stereo headset, checked both of those options, sound was very clear using WMP/pocket Music/ and TCPMP also, but after that, next time i tried to play music i was confused - while using it as stereo headset to listen music hearing voice in headset is bouncing, i can hear it for 1-2 sec., then it is quiet for 5-10 secs, again playing, then stops playing
can you explain it please
thanx
PS: last indra's ROM in use
I bought a Jabra BT620s stereo headset hoping to play stero music from my MDA Compact 3 but it is working very bad. BitPool of 30 plays ok but 40 (minimum quality for music) is skipping Higher is not skipping much more.... I am not running anything else so it's not overloaded. What can i try ? The headset plays perfect with the adapter and my laptop.
Mmh, Removing the MaxSupportedBitPool seems to help a lot! I played 7 songs at 48 bitpool without any skip! It will skipp when i do aother stuff with it or plugin the charger but with only WM is works great now. I hope it stays this way....
Heya,
for a long time i have been looking for some decent bluetooth stereo headset.
now it has come down to two models. well, actually one only
my choice: motorola s9
and the second possibility: Motorola T820
from reading the comments on amazon on those devices i realize that my phone needs to be A2DP compatible to get the best sound out of the headset.
i use s2p as music player and i know it is A2DP compatible... but is real question is: is my phone (HTC P3300 WM6) compatible with this tecnology
also: if you can suggest any other good headsets, please do so.
key features i seek:
- able to use on my phone and pc
- a2dp
- good sound and microphone quality
a2dp not working
Hi,
I have HTC artemis. I recently purchased wireless bluetooth stereo headsets (Jabra bt325)
I cannot connect it to use as wireless stereo. Its working fine as handsfree. After pairing, I cannot see wireless stereo option. Its Greyed. I know that artemis is A2DP compatible.
But i am sure that headset is fine because I tested it with n95 and it worked fine.
Please give me a solution.
Try this:
Start - settings - connections - bluetooth - and add new device
If your headset is already added, use your stylus and press on the bluetooth headset name until the following menu comes up:
Edit
Delete
Set as Hands-free
Set as Wireless Stereo
Choose no. 4
yes it is.
I'm using Dopod M700 which is the P3300 w/o the GPS module.
It works with dell BH200 BT stereo headset and also the o2 BT stereo earphones.
It works on joint stereo in WM5 and since its now running WM6.1 its real stereo.
Dell BH200
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
sameerbs said:
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
Click to expand...
Click to collapse
might be a specific problem of your headset model.
i use a motorola s9 and it's quite nice. fits nice, does not disturb after hours, controls work fine, calling works fine...
BUT (and there's always a but) it has some major drawbacks i found out. while it's still nice to listen music without wires, i encounter this problems. which MIGHT be due the phone, not the headset... but i have no way to test that.
so, basicly, P3300 + motorola S9 through A2DP:
- insides works like a charm. phone in my belt, headset on. music cuality nice with some small music interrupts every now and then (maybe once per 5 minutes). phone calls nice and i can hear and they can listen me well.
but my oh my when i get on the street...
- constant music interrupts every 15 seconds. i have hang the phone around my neck so it's where my chest is to not get interrupts so often (still get one every 2-3 minutes)
- as the mic is where the ear is, if i have a call, it's impossible to hear me due the background noise. this also applies to the underground/metro. it's not that bad in a bus
and well. without A2DP enabled my music player uses so little resources the phone still works fine...
if A2DP is enabled, the phone gets REAL slow and the battery drain is MASSIVE.
when this motorola S9 break... i'll get another model to test. and when that breaks i'll probably get back to some nice wired ones (unless the CPU issues and the battery drain on the phone gets solved) ... but maybe i actually change the phone before that happens. who knows.
Hello. I have a Desire HD with android 2.2.1.
Last year I had a HTC Touch HD with windows mobile. I bought a chinese copy of the jabra bt3030. The sound was out of sync with any video I could play. I didn't try with other phones, anyway I didn't spend that much for the headset, so I just sold it on ebay....thinking that that's why people don't buy chinese copies. OR maybe it was a problem of the transmitter of the Touch HD...so I didn't buy anything else and stayed with the normal wired earphones instead of having another stereo bluetooth headset.
NOW
I have the Desire HD, and bought THE ORIGINAL jabra BT3030. EXACTLY the same problem: youtube, trailers from MDB, .avi TV-rips played with rockplayer ---- EVERYTHING has this horrible out-of-sync audio which makes it impossible to watch even 5 second of a video without getting crazy.
I mean is that a problem of every stereo headset? IS that too much information to be sent to the headset? What can I do to make the sound sync with the video?
I have a stock rom.
Does anyone have this kind of problem? With which phone? With which headset? Is there any support forum for the Jabra BT3030 (it is the dog-tag one) ?
Last time it was a cheap 20$ chinese copy....this time is a retail 65$ boxed jabra....and I EXPECT it to work properly...
maybe you can set up the connection as new. or reset to factory settings
what do you mean by 'set as new' ? I paired the devices today for the first time. Reset to factory settings...is something i would rather not do
BT connections have a small delay.
You can try to set some BT settings to create a smaller buffer or something...
RammY said:
BT connections have a small delay.
You can try to set some BT settings to create a smaller buffer or something...
Click to expand...
Click to collapse
for instance? which BT settings could I adjust?
About the delay: i used until now a normal mono bluetooth headset, which is not A2DP so cannot reproduce media content (music or games sound and so on). There is a paid app on the market called BT Switch. This app redirects every sound of the phone to the mono bluetooth headset, allowing you to listen to music, hear the GPS directions, watch a video on youtube with the sound on the mono headset and so on.....well, there isn't any delay. That's why i can't understand why the stereo headset has so much delay....ok, it is stereo, more informations to send and so on...but the mono one has NO delay at all.
But of course a stereo solution with good earphones is much better than a mono with the low quality sound of every mono headset, which are built only to use the phone and not reproduce any kind of media sound...