Develop Bugs

Has any one taken this ROM appart yet? It has uptated BT.

It is from an HP 6315 from 3/31/05
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22539.html
I would love to see if we could get this stack and the settings on our XDAII and other HTC devices,,, THAT would be cool.
Bluetooth build 1.0.0.3701:
Corrects inaccurate display of headset icon when a call is in progress.
Adds a check to determine if Bluetooth stack is initialized before accepting messages from phone.
Adds a user interface (UI) change to enable a connected headset to automatically disconnect before attempting to connect to a different headset when the user chooses to connect to a second headset.
Corrects check for invalid device name.
Corrects issue where handheld could not reconnect to remote device after a page timeout.
Corrects Object push profile update so it sends all files.
Updates FTP connection wizard to correct service discovery issue.
Corrects issue with call waiting for incoming call handling while dialing out.
Corrects issue with headset connection icon so it is correctly displayed after power cycling.
Corrects audio to make it compatible with an in-car solution.
Corrects audio issue where the right channel for a headset was unavailable for playing audio and during calls.
Corrects issue where the LED and network status were not properly synchronized.
Corrects issue where the user could not send multimedia messaging (MMS) message.

Hmmmm....a few remarks, correct me if I am wrong:
1. There is already a BT version 1.0.0.3900 available
2. This is not a HTC device, so I doubt the tools developed here will work on it.

HappyGoat said:
2. This is not a HTC device, so I doubt the tools developed here will work on it.
Click to expand...
Click to collapse
This is an HTC device. All HPs are designed by HTC.

Well, even though I don't want to stop progress because I would like to have the ROM taken apart for my own personal reasons, the 6315 was actually made by Compal. Bad move on the part of HP in my opinion. However, the bluetooth stack that was taken from an iMate JAM worked on the 6315 and that is how most survived until the update was released. So it very well could work on the HTC's. On a side note, if someone could point me in the right direction, I will take the ROM apart, just don't know where to start.

mamaich said:
HappyGoat said:
2. This is not a HTC device, so I doubt the tools developed here will work on it.
Click to expand...
Click to collapse
This is an HTC device. All HPs are designed by HTC.
Click to expand...
Click to collapse
Oops....my bad....excuses!

no htc dont make ALL hp's pda's the H5400's was oem'd from LG
and even if the ipaq in question is made by HTC then that dont garentee that the xda tools work as they are not made by HTC

I can tell you now that the XDA tools do not work on that ROM as it stands. However, looking through the HEX, it is laid out a little differently than the XDA ROM's but have some of the same portions, just in different locations. Now if I knew more about what I was looking at, I could take it apart for you. The 6315 uses Widcomm BT and like I stated before the BT drivers ripped from a JAM worked great on the 6315 so I have a feeling the 6315 drivers will work on the XDA's.

I can also tell anyone looking at it that in the first header of the ROM the letters are shifted 13 characters. So when you see RAT it equals ENG and so on. It looks like they don't do that for very long though.

BT
HappyGoat said:
Hmmmm....a few remarks, correct me if I am wrong:
1. There is already a BT version 1.0.0.3900 available
Click to expand...
Click to collapse
BT 3900 and 3500 do not support Hands Free Profile or even Headset Profile on my XDAII.. This is important so people can use Caller ID on a BT device and OR a Car Kit with the Hands Free Profile....
Switching stacks is a pain in the but...
Even so, the only OS that even slightly works with Hands Free on the Himalaya, is 2.20 translated but even that has bugs that makes it very frustrating. The 2005 did have a fully functional BT, even having separate serial ports for each BT device, (like GPS), but the other bugs and the limited memory left over from the useless and unerasable Extended ROM from the other OS made it no good..
With this new ROM, I may be tempted to buy the HP again.. When I first bought one, it was DAM slow and the BT SUCKED!!!
Maybe now it is usable.
I love my Himalaya and it's 128 of built in..
http://www.expansys.com/product.asp?code=PDA2&asource=IMATE
http://www.expansys-usa.com/product.asp?code=PDA2&asource=IMATE
I will just have to keep waiting for one of the above unless someone finds a fix for the BT Hands Free.

Blackberry Connect SW on JasJar - Help

I want to dump my blackberry phone and just use my jasjar. Early reviews of the German ROM with BB Connect seemed to indicate that I would need to download an older T-Mobile ROM with an older radio stack to get BB connect to work.
Can someone point me to a good combination of a more recent ROM (english) with the BB Client software that I can use with a US T-Mobile Enterprise BB account.
thanks,
--Kia

Hi,
you can download the BBC-Client from Vodafone (German version, dunno if there's a WWE one). It's not provider locked like the T-Mobile one and works great with my Uni.
I have the latest qtek rom with radio 1.09 on it.
DD here: http://www.vodafone.de/downloadarea/BBConnect_PocketPC_BB_2.1.2.16.zip
Cheers

Blackberry connect working on unversal
I managed to get everything working. Thanks for the link. In addition here is the link to the activesync with the Blackberry desktop software.
http://support.vodafone.de/publicfiles/ActiveSyncInstaller2.1.1.9.zip
First I installed the bbclient on the uni and then the desktop software it read my settings from the other blackberry desktop (the one used with my device) automatically.
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?

Re: Blackberry connect working on unversal
kbehnia said:
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?
Click to expand...
Click to collapse
Glad to hear that you got it working.
The disconnect is a normal behaviour. BBConnect will always disconnect from GPRS a soon as you attach the device to ASync. AFAIK there is nothing you can do about.

Re: Blackberry connect working on unversal
kbehnia said:
I managed to get everything working. Thanks for the link. In addition here is the link to the activesync with the Blackberry desktop software.
http://support.vodafone.de/publicfiles/ActiveSyncInstaller2.1.1.9.zip
First I installed the bbclient on the uni and then the desktop software it read my settings from the other blackberry desktop (the one used with my device) automatically.
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?
Click to expand...
Click to collapse
Use Airfix and checkit out, it will not kill Wireless connection while Active Sync is on. Cheers,

Strange thing - when i turn off my device (having BB client running) after i turn it back on in 10 minutes - BB is down and there is no icon in the taskbar. It does even disappear in Settings !
I've installed BB Connect on SD card.
Anybody experienced anything like that ?

Resolved.
BBConnect HAS to be installed in the main memory - no way to make it work correctly been on SD.
One more issue noticed - from the first try i was not able to see the BlackBerry folders in the list of my messanger. Messages are comming and i can preview them at the bottom of the screen, but when i goto messenger (standard) i do not see anything.
I've created a new dummy mail account and - VOILA ! i can see the BlackBerry folders. After 3-4 hours is disappeared again. :-( . I removed the dummy account and again was able to see the BB folders for a while. Then the whole story repeats.
Don't understand how to overlwhelm this.
Anybody has any ideas ?

cross coupling threads so we don't loose anybody
http://forum.xda-developers.com/posting.php?mode=reply&t=60563

dependance on phone provider.
kbehnia said:
I managed to get everything working. Thanks for the link. In addition here is the link to the activesync with the Blackberry desktop software.
http://support.vodafone.de/publicfiles/ActiveSyncInstaller2.1.1.9.zip
First I installed the bbclient on the uni and then the desktop software it read my settings from the other blackberry desktop (the one used with my device) automatically.
Everything is fine except when the Universal is docked it disconnects the GPRS tunnel; probabely firewall issues.
any ideas?
Click to expand...
Click to collapse
Do you know if this software can work with every mobile provider? I'm in spain, using vodafone but they told me doesn't support this sofware and said nothing is available to use BB in a universal...Maybe a commercial matter in order to sell BB hardware...

Bluetooth DUN (dial up networking) for WM6

Ok. After searching through the forums, and trying various things, I've finally given up...
The goal: To enable bluetooth DUN for WM6.
According to Microsoft, this feature was originally removed due to the thought that their 'Connection Sharing' feature was superior. Unfortunately, my TomTom 910 will ONLY connect via DUN. So, obviously I would like that 'feature' back!
Do any of the chefs out there have access to this feature, and can create a CAB to enable it on my 8525??
This would REALLY be appreciated. I'm sure I'm not the only one out here who misses this feature.
thanks.

I'm with you

Me too
I'm in the same boat. 8525 and 910. Would love a fix.
Kevin

Considering how the change was made to WM6, it is probably unlikely anyone would be able to bring back without issues. I think it is time TomTom start supporting WM6.

Not very hopeful
I asked this same question on the general forum just a couple of days ago.
http://forum.xda-developers.com/showthread.php?t=309996
Unfortunately, from Menneysys' answer it looks like Ipsi2000 is correct.
I think the options for us TomTom 910 users are:
1. Use duplicate sim and keep another phone in the car to connecto to TomTom
2. Pray and wait that one of the operators releases (or one of the chefs gets hold of) a version of WM6 for the Hermes with DUN back in there (since it will be an option at each operator's discretion)
3. Hope that TomTom upgrades the firmware to support BlueTooth PAN over ICS (That will happen just after hell freezes over. We'll probably have to buy the TomTom 920 or something...)
4. Flash our Hermes back to a pre AKU 3 WM5 ROM (Nooooooooooo!)

cuccureddu said:
I asked this same question on the general forum just a couple of days ago.
...
I think the options for us TomTom 910 users are:
...
2. Pray and wait that one of the operators releases (or one of the chefs gets hold of) a version of WM6 for the Hermes with DUN back in there (since it will be an option at each operator's discretion)
...
Click to expand...
Click to collapse
I also miss DUN thingy (I have M$ BT stack on my toshiba with completely crippled/non functional PAN and don't really feel like experimenting with Widcomm BT stack right now). So, no GPRS/EDGE internet connection for me - I kind of got used to it with my old P910...
There is an idea though - I did a little digging in the BT services branch of WM6 registry and I've got an impression that DUN functionality is still there it's just has to be enabled via registry (dunno why I got so sure though). What you can try is to ask somebody with pre-AKU 3 wm5 device to dump the registry for you and compare Bluetooth branch (the part where it lists services) with your WM6 device.
It's just a hunch - if what you are saying about operators enabling DUN BT service at their discretion is true, then this trick could actually work out.

i have a spare hermes [Tmobile VarioII variant], i can dump you a copy of the registry just after a HR is you would like?
i can dump it via registry workshop if thats best for you?

Acuum2 said:
i have a spare hermes [Tmobile VarioII variant], i can dump you a copy of the registry just after a HR is you would like?
i can dump it via registry workshop if thats best for you?
Click to expand...
Click to collapse
Yup, sounds great. If you can do just HKLM branch that should be enough. I have WM6 black - we can compare BT parts se if we can try to enable DUN back.

The worst part is that, according with MS blog, they DIDN'T remove BT DUN, they give it to the operators, and they can choose to add or not BT DUN to their ROM.
Just isn't in DEFAULT rom, is an option
So, somewere, the MS BT DUN should be available!

I love how because you use it, it automatically makes Bluetooth PAN useless.
It isn't.
It is MILES better than ****ty Bluetooth DUN. I use TomTom on an ancient Ipaq PDA, and even that supports PAN. Not only does it support it, its miles miles more stable. It doesn't require you to dial-up every time you go through a tunnel, or under a bridge, it just works.
I vote NO to bluetooth DUN (unless it can run alongside PAN)
Its TomTom you should be angry at, not MS or the operators!

I know, my car is miles away from my feet, but sometimes I need to go were only feet are allowed
The problem isn't what is better but why they removed BT DUN instead of leaving it..
I am a bad, bad, bad boy, but I believe there is some marketing strategy behind, like AS4.5 NEEDED for WM6 not working with outloook 2002, with NT...

al3xxx said:
Yup, sounds great. If you can do just HKLM branch that should be enough. I have WM6 black - we can compare BT parts se if we can try to enable DUN back.
Click to expand...
Click to collapse
al3xxx
Here you go,
sorry did the entire thing...

well i added the WM DUN reg keys to my Elf WM06 and its not enabled the DUN service... (not surprised, if it were that simple it would have been figured out weeks ago... So what's next?)

Microsoft saying they give the DUN to the operators sounds fishy. Let's face it, Microsoft would prefer everyone uses PAN (considering it provides all the features available in DUN and plus more). They basically said to the operators we will support PAN, however if you wish you can implement DUN but you will have support it yourself and any issues that may crop up due this implementation. Most operators would not want the additional support or issues that may come up due to them providing a deprecated function. PAN is the replacement for DUN and there is very little we could do about it.
Software vendors need to adopt PAN or it may not work with WM6.

clublander said:
I love how because you use it, it automatically makes Bluetooth PAN useless.
It isn't.
...
I vote NO to bluetooth DUN (unless it can run alongside PAN)
Its TomTom you should be angry at, not MS or the operators!
Click to expand...
Click to collapse
Yeah not MS, what made winxp BT stack PAN absolutely NOT working - tried bunch of BT devices with it - neither one was recognized as PAN capable... See if PAN on the phone (and PC) was working for me whan I was set in front of the fact that there is the ONLY choice MS gives me if I want to use my phone as wireless modem i wouldn't really get the DUN back...

al3xxx said:
Yeah not MS, what made winxp BT stack PAN absolutely NOT working - tried bunch of BT devices with it - neither one was recognized as PAN capable... See if PAN on the phone (and PC) was working for me whan I was set in front of the fact that there is the ONLY choice MS gives me if I want to use my phone as wireless modem i wouldn't really get the DUN back...
Click to expand...
Click to collapse
Thats funny, I use my WM6 device with XP with no troubles.
I suggest you need computer lessons.

To re-iterate, TomTom is going to have to update THEIR Bluetooth stack, unfortunately. PAN is almost identical to DUN, it just has an interface on the phone now, whereas you had to do it all from your PC before. If you don't believe me that it's virtually identical, look in your WM6 registry. The PAN service is STILL CALLED "DIAL UP NETWORKING" in the registry. Furthermore, if you recall, when you pair your phone to your pc, the phone offers DUN as a service!! Do you see PAN in that service list? No... because it's DUN!! Same thing, folks.
All MS was shooting for was the ability to make it easier to dial up to the internet through the phone, not to mention, add the functionality to become a Network node. It's the same thing as buying a new pc these days that doesn't come with a dial up modem. Why not? Because it comes with a network adapter.
TomTom is going to have to update their stack to recognize this service.. not the other way around.

Stpete111,
I emailed Tom Tom about this today, and their attitude is as follows:
I told them I have a M3100 that their attitude was - we don't no support phones with WM 5 OR 6 especially NOT this device! But get this, they DO support the O2 XDA Mini S....so I don't think they understand that they are already supporting a WM5 device....
Anyway, there was no indication that they intend to change this, and I suspect that they won't.
So I suspect you'll have four choices:
1) Live without any phone when using you're TTG - not an option if you've already subscribed to one of their services.
2) Go back to WM5 - where it will work - far from ideal.
3) Get a spare phone that will work, and a duplicate sim - not that easy...
Or finally, 4) Invest in a device that's more current that WILL support WM6 devices.
Anyway, that's my thoughts - I've yet to make up my mind. But I'm not holding out any hope of TT changing their minds!!
Matt

Here's an update:
I have spoken with TomTom regarding this issue, and this is what I have found out. It's not really good news.
TomTom is phasing out the cell phone connection to their GPS units. All future units do NOT use cell phones to access traffic and weather info. They will ONLY use FM antenna for their data.
So, TomTom probably won't be updating their Bluetooth stack for us current-generation GPS owners. Their next generation ships in July.
Ideally, (for me at least), I would like to have BOTH DUN and PAN services on WM6. That way, for "older" devices, we still have connectivity, while at the same time, future devices can use PAN.
(just my .02c)

Has anyone tried Garmin products? I have tried two Garmin units but NOT with Bluetooth, so I don't know anything about their BT functionality. I DO know however that I much prefer the Garmin devices to TomTom's. Not trying to spark a debate here over which is better... but perhaps checking out Garmin's capabilities is a 5th option?

Tomtom 6 is purposedly disable for the Tytn ??

Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.

louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
Try a search on the Hermes forum. I found lots of stuff.
I found THIS ONE . But there were MANY others. Some users reported success with some ROMs.

Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....

I have 2 Varios II and I can admit that I had some issues with TT6 with WM5. TT liked to freeze when I was typing in the address or browsing through menus. When I changed to WM5 AKU3.2 it was better, but still not perfect. Eventually, it was WM6 that helped me. Now TT6 is running without any issues (of course it can freeze from time to time when I have too many programmes running in the background). Just try any of new WM6 and everything should be fine.

I had TT5.21 which people said run fine which didnt on wm6 but TT6.1 works fine

Long time since i've been on here but while i was browsing about, i saw this problem. All i can suggest is using the inbuilt GPS and see how that works? I have TT6 as well and i have used it perfectly well on an XDA Mini, XDA Orbit, SPV M700, HTC Touch, HTC TyTn II... seems a bit odd that you're having these problems. Have you since cured the fault or is it still being a bit of a ****bag?!
While i'm here... anyone got the latest maps at all for TT6? Shout me on [email protected] if you have any info on TT6 or need any PDA / Pocket PC help.
Griz

ibanyard said:
Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....
Click to expand...
Click to collapse
Yeah, I had established that the gps was working fine, I've been happily using it on my ipaq 2210 for ages. Then with the Hermes testing with gpsgate and some other stuff showed no problems.
The problem I had was that my TT6 was a 2GB SD card version and I didn't have micro SD big enough to test it. I had about 1hour to play with my friend's one and that's when I discovered the two problems.
He lent me the card to play with this evening and I've made a little progress now. I've sorted the flakey GPS operation, primarily by changing the com port, deleting the pairing and pairing again. So far that's not dropped out since.
Tomtom runs but freezes, this appears to be a confirmed problem which I hope that WM6 will solve as (mean-machine) suggests.
I feel a lot happier that the damn thing runs at least. The freezing appears to be related to cpu usage as I find that that zooming right out on a map is a good way to cause this to happen. The menu screens can be a problem too and the rest appear intermittent. As others have stated in other threads, hitting the red button and then switching back to TT will free it up.
I guess the next thing is to study the Wiki and try an make sense of the order things need to be done to put WM6 in, which Rom if any, which version of WM6. ... Information overload, so I think I need to take it slow and ingest the data .
Thanks for all the replys guys, it amazes me how much support HTC has and how many of you are passionate about them. Up till a few months ago I had never heard of HTC, now I doubt I'd consider anything else.

TomTom6
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?

@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.

rbin said:
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?
Click to expand...
Click to collapse
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.

todd_jg said:
@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.
Click to expand...
Click to collapse
Great link, thanks Todd. Reading glasses are on already.

TT6 w/Pharos and Holux recievers work great
I've an AT&T Tytn upgraded to WM6 and have no troubles with my Holux or Pharos receivers and TT6.
Everything works great EXCEPT issues with data connections such as TT Buddies or traffic. This isn't unique to the PDA version of the software though, as I also have a standalone TomTom GO 910 paired with the phone and it works almost okay as a bluetooth speaker phone, but constantly has trouble getting a good data connection.
My $0.02

louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have used TT6 on my MDA VArio II (TyTn) for almost a year...no problem. Now I have the TyTn II

Same here.. been using Tom tom 6 on my Tytn since the day i installed wm6, no problems here, works like a charm!

HEAT???
I have been using TT6 on my Imate JASJAM running the DOPOD WM6 ROM without much trouble (no hanging etc). The only problem I am experiencing is huge power drain and the unit being physically hot when running TT. Maybe this power drain and potential overheating can cause some units to hang and playup, or potentially any unit given the right environment!
Anyone else finding their units getting a bit hot?

I've been using TT6 on my Tytn (MDA Vario II) almost one year now. No problems. Started using TT6 while running WM5, upgraded to WM6 (schaps rom), reinstalled TT6 and it just continued as before. No problems, no hangups no freezing. I've been using all kinds of different charts with TT6, so I don't think the problem is with TT.

louiscar said:
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.
Click to expand...
Click to collapse
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M

I have been running TomTom Navigator 6 on my JASJAM for some time. The hanging problem described is probably caused by having all the Points Of Interest (POI) active.
Go into the TomTom settings menu and de-activate ALL the POIs. Try it, then only turn on the ones you actually require.

oltp said:
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M
Click to expand...
Click to collapse
Doesn't work either. Seems that after a soft-reset the BT connection with my GPS is f*d. Very strange because the BT headset doesn't suffer any of this. Maybe time to buy a new GPS, but with WM5 I never experienced this behaviour.

I found that with tt6 you need to have the WM6 internal gps settings set to "None" for both program and hardware port. Then make sure the box is checked in the last tab so it autodetects the com ports. Once all this is set and you goto add a bluetooth gps device in tt6 it gives you the option to use com port 0. select this port and it should detect your gps unit with no probs. Been running tt6 on my 8525 with tnt's latest cooked rom and things couldn't be running smoother.
Edit: On another note. I used to use Telenav with my 8525 with the original at&t rom. I had the worst luck with that application. I would constantly lose my gps connect and I almost always had to do a soft-reset to get it working again. It is quite possible that Telenav was not the issue and that the particular rom I was using had bluetooth connection issues that were resolved when I switched to a cooked rom such as the tnt one. So for those using tt6 with BT connection problems you may want to try a different rom and see how your luck goes.

CARPC + HTC how to?

Hi @ all
I'm using a HTC TYTN II and want to connect it to my CARPC (full working normal PC) to make phonecalls read and write SMS.
There are a few progs that work with "normal" mobile phones but not with PPCs.
It should be connectable to USB, so I can charge the accu whyle driving.
I tested a remote controller to control the PPC via touching the CARPCs 7" touchscreen, this works okay. But I need a prog that will give the sound form the PPC to the CARPC and the microphone input from the CARPC to the PPC.
My fav. would be a programm that can fully control the PPCs phone functions and but not required the sms functions.
I think you know what my problem is, and sorry for my bad english I'm from germany.

Man, I just started working on the same project! Although I only want to connect the PC to my in-dash display for simpler things like Slingbox, web browsing and talkstreamlive radio.
I found this in my searching...
http://www.sparus-software.com/Device-Management/Products/EveryWAN-Remote-Support,43/index.html
Hope this helps and keep in touch as you progress and I will too!
Thanks
ITAdmin

Hey man, ive been looking for the same thing! i was using a program called err damn cant remember, but basically it just displayed my phones screen on my liliput and i could dial that way, ill see if i can find it, its been a while since i used it, syncing bt back and forth just became a hassle heh