just installed wm5 Tuma v1.3 on my Qtek9090
had (some) hope that mic problems would dissapear, but no luck att all
besides that, all is working like a charm, even performance is not as bad as i thought it would be
btw, GREAT JOB keep up the good work, it is appreciated
i've read in some forum (not sure if it was on XDA) that someone had solved the problem by putting a extra hole next to mic :roll:
i'm decided to try it out since i'm tired having to use a headset when speaking on the phone with everyone :?
i'm used to open up/repairing laptop's at my work so how hard can it be, right? -WRONG! -i cant find the damn mic!! :shock:
i opened up the BA but i cant find it anywhere...
next to the reset and hardreset buttons theres nothing that looks like a mic...
does someone know where is it??
thx much
Its just next to the reset button at the bottom of the XDA IIs. When you open the cover, the mic is fixed in a kind of slot, just in the same spot where you see a hole next to the reset hole in the cover.
Related
what entails to do this.
Stupid that i have to hold a button for 3 seconds why cant i just have a button to do the job?
I totaly agree with you, it is just stupid.
i have tried to find the file which is running the speaker on but with no luck .
Please if any one knows how to do it will be great.
speaker
i'm interested too
i can't find the service
thanks
speaker
i'm interested too
i can't find the service
thanks
I don't think you will find this, (I hope you do) but it seems impossible to implement if you are not the cprog program...
http://forum.xda-developers.com/viewtopic.php?t=18154&highlight=
is it so hard that no one wants to tackle it?
hey guys,
my green answer call button doesnt seem to work. i'm wondering if its the rom or the phone. it still lights up but doesnt respond when i push the button.
any suggestions like a button tester program?
kind regards,
jason
Are you having any problems with any other keys?
If its just the one you can break your phone down and check your connections and see if anythings loose or damaged. Make sure to go to the Wiki and check out the guide on how to properly take your phone apart.
everything works except for that the green phone button
Starting to wonder about malfunctioning buttons posts
I myself posted a thread on my malfunctioning power button . I am getting the feeling that certain apps and tweaks are causing some of these malfunctioning hardware buttons to happen. Not exactly a scientific point of view, but I think lots of this button malfunctioning (no matter which one), can eventually be resolved by HR or as mentioned in another post, Clear Storage. I myself, within a minute, pulled out my SDMicro card out for 15 seconds, took off Quickmark application (last app or cab put on my system), and my power button turns on/off as it should. I had to resort to SR's when I had my problem..........................
Latest: Found out that my main problem was NOT any of the above,, it all seemed to occur because of a buildup of Notification Queue's,, so check that out... I think that those queue's can be a source of a lot of problems
cheers for that suggestion.
softreset doest fix it so i will have to resort to hard reseting.
lucky the vodaphone version has the 3G phone button and i can use that to get to the dial pad but it then assumes my calls are 3G which are annoying
has anyone got any suggestions then?
i flashed K's new rom and still my 'Green Answer Phone' button doesnt work.
thanks in advance for any help
jason
jasonchiu said:
has anyone got any suggestions then?
i flashed K's new rom and still my 'Green Answer Phone' button doesnt work.
thanks in advance for any help
jason
Click to expand...
Click to collapse
i had a similiar problem when installing a different dialer via cab.
i would suggest to either install a naked rom (like pandora naked) or one of the older roms (like schaps v3.x).
do not install any other cabs and see if the green button is working.
i flashed pandora naked rom and it still doesnt work.
any one have any other suggestions?
if not will i have to take the phone apart :S?
the Irda doesn't work at all, when i install a program to use my tytn as a remote for my tv, and i try to clone my remote i get an error saying "Irda port being used by another application"
and it wont communicate with over devices via Irda. other than that it works great...does anybody know a way to fix this problem?
p.s. tried other roms, Irda works fine, so it's not the phone.
please help this lost soul!!
thanks!
sorry, posted in wrong area! rookie mistake! forget about it!
A general rule I follow is not to use too many .cabs as certain apps and tweaks can cause some of these malfunctionings to happen.
You cant be installing cabs for everything on your phone. Do you really have so much space in your phone?
hey guys i thought this was a thread about getting my green answer call button working again!
seem like more of a hardware problem to me. you can still try checking for bad blocks, flashing another radio, but that all may be futile. look up the disassembly guides in the wiki. mikechannon also has some stuff on that, if u click on his sig
It happens to me quite a bit when i open up the keyboard..sometimes i'll get just a "t", lots of times "ty." I don't think it's a coincidence that they happen to be the 2 top most centered keys, but I don't think the casing is rubbing and pressing the buttons. Is anyone else experiencing this? It is pretty annoying cause you always have to delete them before you type anything
i get them as well since i last updated (CRC r11.0)
same rom as me...
hmmm....better check in that thread
Mine does it as well using TNT's Rom. I don't think it's rom related, as every ROM I've used has done this.
It may not look like it, but I'm betting your casing it rubbing. I know mine is by using dry erase marker and seeing the transfer on the T and Y keys.
Good luck
lol.. i get them also.. but it only happens sometimes...
im using FARIA-R32-XDA2 rom
Yea, sitting here playing with mine, you're right, only sometimes. Seems it depends how I open the slide, how it torques, etc.
TY
No... It never hppened to me, actually... No matter what ROM I use...
I wish I could help.
Iim sorry...
Cheers.
Your phone is thanking you for installing a new rom! TY!
TY
Hello Together,
I think it is a hardware problem. When push with your thumbs on the bottom of the screen while you slide out the keyboard (this is my normal methode to slide it out) you push the characters T and Y because they are in the middle of the upper row.
I wonder if it is possible to lock the buttons (in software) till the slider is out completely (when the screen rotates). Does anyone know a register or software solution?
Greetings Pudl
yes its a hardware problem...your keyboard cable is a bit loose probably...
you have to take your phone apart to fix that
its the bottom left ribbon cable with a flat silver plate that u need to unplug when u seperate the motherboard
and the screen rotation is activated by some magnetic thingy if i remember correctly
hehe,i also think it's the hardware problem
Hi
i have been getting trouble with my TP2 , since no1 reacted on my previoous post i decided to do a hard reset, i figured the "turn off" on moving back the keyboard under the screen, hoping to reset any things that might cause this. as it can just be a bad device and now i most likely need another
Or can it be a virus? i installed some cabs that were floating around on this forum and after some time i got the issue , when moving back from landscape to portrait , the device turns off instantly
what can this be?
advice needed
Alsa86
Alsa86 said:
Hi
i have been getting trouble with my TP2 , since no1 reacted on my previoous post i decided to do a hard reset, i figured the "turn off" on moving back the keyboard under the screen, hoping to reset any things that might cause this. as it can just be a bad device and now i most likely need another
Or can it be a virus? i installed some cabs that were floating around on this forum and after some time i got the issue , when moving back from landscape to portrait , the device turns off instantly
what can this be?
advice needed
Alsa86
Click to expand...
Click to collapse
i supose this happens when you have keyboard open and close to go back to potrait. yep dodgy or faulty device........... i'd return it. ribbon fault i'd say mate. no virus would do that to phone. return it for a new one and tell them its a faulty ribbon. unfortunately these things do happen.
now have you installed g-sensor or flip it? if this happens with keyb closed then its something you did or installed or not set right!
i have not installed those last 2 programs
programs isntalled were
Facebook app
coreplayer
NFS underground
and some theme cabs
well tomorrow first thing il go and try to get a new one
ribbon fault your saying? what is that if I might ask?
il be sure to notify them
thanks for your quick reply
Alsa86
these have nothing to do with htc touch pro2 itself dude!
it's about the rom you installed in it,so pls return to your technician to get a good rom!
it's like you have super good pc,but the windows xp you installed is crap,then your pc will always get this problem and that......
FYI: rom means: OS(wm 6.5 for example)+Radio(GSM etc)+Extrom(touchflo 3d etc)
Searched in several forums but could not find anything, so apologies in advance if I missed it and please post the link.
Intermittently the sounds quit working for all alarms, events, phone, etc... I go into Sounds & Notifications to test and again, no sound. Soft reset corrects the issue, but it will come back again.
No extra media players installed, only the standard from the orignal ROM. I have Lotus Traveler installed which adds a sound event. On another PDA (Touch HD) I have BB Connect installed and it displays the same problem.
FWIW I have also seen this behavior on Kaisers and Touch HDs.
Thanks in advance for any ideas or, even better, a solution.
Sorry I can't help but I've had a similar problem. The slider sound doesn't work! Even after reset! Try changing it and still nothing! The rest of the sounds still works but they seems much quieter than normal! I don't think I've installed anything dodgy! Just seemed to happen! Any help would be great!
Thanks
same issue found in my Diamond as well. Maybe it's an issue in WinMo 6.1 in general
Actually, none of the sounds work! Just makes a noise when you change the volume! Soft reset still doesn't help!
Does anyone know what I could try please?
I have the same problem with my Touch Pro2. Sometimes suddenly the volume goes way down even though it shows its at its max. The volume is really soft and you cant hear much.
Also when I receive certain notifications I hear a small click which is proberly the first 0.01s of the notification sound it tries to play.
Count me in.....same here. Wonder, if it´s a hardware issue or a driver problem.....
Hoping for an official WM6.5 ROM soon...
Thanks for the feedback. I can tell you that this happens with AT&T Tilt running stock ROMs/WM6 too.
I am still searching for an answer and if I find one I will post it.