I get an error on my XDA2s, when I try to start the camera:
"Failed to initialize camera. Please reset the hardware. 36001:1:100:2"
I did this, but still no joy.
I tried to search for a CAMERA cab on here, but can't find anything that works.
My device is WM2003.
Can anyone help?
I have seen other ppl with the same error, but no fix.
Max
I had this issue after updating the ROM. I needed to update the operator software to fix it (in this case from orange). You may also find that media player wont load as it cannot find any skins. Let us know how you get on.
Tried.. failed
I re-flashed.
What a drag.
flash
was it easy to flash? and did it sort out the problem?
it's easy to flash.
Read the wiki
wiki.xda-developers.com
Related
Hi,
I have got a problem with a new HTC P3300. When I want to start the camera I get the following Error:
Unable to initialise the camera. Failed to set the Camera device. Only possible to accept the error. After this the application quits
I have searched the internet but unfortenaly I found nothing
The system is running on WM5. I have added the patch for the camera but it doesn't help either.
some people reported camera problems with overclocked devices
yes I have seen that.
The PDA is brandnew... So I can send it back, but that means I am unable to use it for quite a while.
So no overclocking problem.
Okay, I've searched alot to get this thing solved. When I try to update my rom, the update starts normally, but then my telephone screen turns black, my gets disconnected, windows tells me it has found new hardware. The update failes and returns error 260 (connection lost). When I soft-reset the telephone afterwards, it returns to it's old shape.
Info about my telephone.
Rom: 1.93.404.1 NLD
Radio: 1.0025.05
PC: Windows XP SP 3, Active Sync 4.5
I tried to update with this rom: RUU_Diamond_HTC_NLD_2.03.404.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I also tried to update to Hard-SPL but that gave me the same error.
PLease guys does anyone of you know how to fix this? (personally I think it's windows xp which is screwing up).
Thanks in advance, I appreciate all help.
Yours, Martijn.
Even the tiniest tip may help (A)
I had the same trouble with that rom, I tried from internal memory and it worked. Search the wiki I am sure the info is there.
"ERROR [260] : UPDATE ERROR
This error occurs when there is an "open port error" before upgrading the CE ROM image. Solution: You can reset the device and run RUU again. If you still encounter an "OPEN PORT ERROR" again, reset your computer and try again."
This is what the WIKI tells me. But I have tried that. How did you manage to perform the update on the internal storage? Because I tried that with hard-spl but it wouldn't work.
Besides I only have .exe files for the Hard-Spl and the official rom from HTC.
Thanks for your reply though.
EDIT PART, just read this on another thread in the wiki:
ERROR 260 (Update Error):
"Your phone is not connected to ActiveSync. Check your connection or restart the phone. Also make sure in ActiveSync that "Allow USB connections" is checked (under File->Connection Settings). If this still doesn't help, then remove the memory card and SIM card before flashing."
I'm going to try this now, if it worked, I'll let you know
Just found out I have a CDMA version or something, I'll try google for the problem now.
Get the rom image from your temp directory and look here, found in the wiki
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
dickenz said:
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
Click to expand...
Click to collapse
It looks alot like your problem yes. But last time the hardware installed correctly, then the patch I found for CDMA models on ppcgeeks failed, and my telephone got bricked. So I'll need to get that fixed first. After that I'll sure think twice before I try another rom update :/
Thanks for all the help though, and I have to advice everyone to not use the hard-spl for cmda users from ppcgeeks unless you're 100% sure it fits your model!
Hi, Need some help here....tired of the same whole mix-mash from htc (recycled phones) so going back to basics - htc s620 (wm6) + my just acquired used 4700. Intend to upgrade it to WM6.1, I've been using htc phones so I am used to rom flashing... or so i thought. I downloaded some of the wm6 and 6.1 roms only to find that dont come with an ruu built in. Not a problem I thought,just get a carrier and replace the nbf file. Unfortunately despite an extensive search on brighthand and here and yahoo searches galore i havent been able to find a suitable guide with the necessary utilities to carry out the flash. The "universal bootLoader" no longer seems to be around (404 errors) samething with other Ruu's (from ru websites etc) yet I can still see thru the long 220 - 251 pg threads that people are flashing with something. In the interest of new 4700 owners would it be possible to have a particular "How-to-flash" thread possibly as a sticky? If not at least can someone help me with a how-to guide and any link to the relevant ruu or bootLoader utility for the rom flash.
Thanx all appreciate it.
You can find all the neccessary information on this page; different ROM's, a bootloader, and instructions in PDF format..
Thanks a lot ridolfo. that has helped a great deal. Slight problem that you hopefully know a way around. After downloading the BootLoader.exe rar file, I tried to open it to proceed but it kept on coming up with an error... "windows cannot open the selected path file...you may not have the appropriate permissions to open them" I just cant get past that altough it has apparently opened and expanded showing a whole lot of other files but i cannot basically get past that stage to run the rom nbf file... Any ideas please?
Right sorted!
Very simple but unexpected solution especially since i hadn't seen the issue mentioned elsewhere.
Simply disconnected all connections to the internet especially wifi (for safety/protection etc) and then disabled zone alarm!
Everything went thru as normal,updated and now just waiting for boot-up.
thanx a lot Ridolfo!!!
I didnt want to post this in rom developement, cause it didnt seem like the place to do it. My apologies if this is out of place.
I tried flashing my phone, followed the guide to the T. Started my hardSPL program, got all the way to the point where it would open the phones bootloader, then active sync crashes and i get an error screen on the phone that says it cant open the bootloader.exe
Anyone else run into this? Is the sprint TP2 different?
Tried manual and it wont even open the manual SSPL exe file.
http://forum.xda-developers.com/showthread.php?t=550540
Hope that helps
Good luck,
thats the exact guide i was following.
Tried again, still no luck, the program connects, checks my ROM version, then the progress screen picks up, active sync on the PC completely dissapears. then i get an error in the unlocker that says cannot make connection.
Hey guys. After many frustrated days searching for a solution to "The timer ran out on what we were trying to do.", I found today an official solution posted by Microsoft.
So, for those with either:
800705B4: The timer ran out on what we were trying to do.
OR
80180080: We couldn't update your phone because your operating system might be corrupt.
search for "WPSupportTool" in google (Article ID: 2530409) and download for your Windows PC. (Sorry; can't post links!)
This is the best solution so far to update without erasing/reseting your phone. Enjoy!
From their article:
"Try using the Windows Phone Support Tool. The Windows Phone Support Tool is an application that fixes problems that prevent your Windows Phone 7 from updating successfully. The tool only works for the two error codes listed in the Symptoms section."
How can I use the WP Support Tool on Leo - HD2 > it doesn't have "camera button"
I've also been stuck with 800705B4 for months now. Very frustrating.
I believe I've tried everything...
I can't even unlock my SD card because I also get the 800705B4 error when I try to send the unlocker file via cab sender.
Well, I guess we just have to hope until there's a fix for the 800705B4 on HD2
if i use this tool (WPSupportTool) is it going to erase my phone ?
what about interop-unlock ? am i going to loose it ?
i'll really appreciate your answers
Erase phone: REALLY?? Read the first post:
"This is the best solution so far to update without erasing/reseting your phone."
Remove interop-unlock: highly unlikely, although a few updates do that for anybody.
The obvious answer is make sure you have a backup/restore point (if possible) so you can roll back if something gets messed up.