Develop Bugs

Phone will not come out of standby

hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.

no one seen this then I guess.
Bummer (for me!)

Try hard reset
sickboy555 said:
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
Click to expand...
Click to collapse
Try hard reset

softreset helps, sometimes i have the problem with windows mobile 5 too

jmermel said:
Try hard reset
Click to expand...
Click to collapse
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.

Hard reset
sickboy555 said:
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Click to expand...
Click to collapse
You might have loaded a program that is not liked. Use a backup program. If this does not work then load your backup after the hard reset and you will be back to where you started

P3600 with D810 WM6 ROM; also happens occasionally, recovered with soft reset. Seems to happen most often when I press the On/Off button twice too quickly.

thanks guys.
I'm going to try the hard reset route-I'll report back.

Some time ago this happened to me so often, but said it was due to some application, in my case was Slide2Unlock.
Since I removed by their consumption of memory it didn't happened to me.
(Sorry for my english)

Bugger, this has started to happen to me as well. Only 3 times in the last 3 days but if it keeps is up that will be enough for me to do a hard reset (overdue). Strange cause the only new thing I put on in the last week has been PCM 16 which is only a copy/paste exercise.
The fix in the Hermes forum is to force your device to sleep and not let it go into standby.
I have had some problems recently with DeviceLock 1.2 just ceasing to work and have to uninstall/reinstall to make it work again. I set it to turn the screen off when locked, as this does not put the device on standby, maybe there is the same issue with it going into standby by itself.

I have the same problem..i think that it has to do with the phone hanging..most probably due to some background programs eating too much power and memory and the phone just lacks till it hangs..happens when you have other programs that have hanged as well..my problem is with PocketAlarm..it takes so long to load my phone went to standby and the phone couldnt be called back..in brief the phone just hangs because of a program..i don think it has any problem do to with the hardware or strictly the OS..cant really explain..but the role the OS play in this problem is that it allows the program to make full use of the phone till the phone cant cope with it..its the core of the OS so it cant be avoided with any other versions or anything..sorry it seems rather unclear..hope you guys understand..

same problem for me ... from times to times, when a call hang up, i push a lot of times the red button for going back to the today screen and as it shows up, i click immediately on the Power button for turning off the screen. right after when i forgot to do something (approx 1sec) i push the power button and there it doesn't turn on the screen ... strange ...
what i've installed on it :
TomTom 6
BatteryStatus with today plugin ver 1.04.203 beta4 i put tray icons too.
i've bluezard for sniffing and/or hacking bluetooth devices.
OBDgauge too it's a software that works with a bluetooth dongle i plug into the diag port of my car.
and that's all. ah yes one more thing -> i disable the "HTC Home" because i don't like it.

Same problem here...
Still no solution?

I got this problem from some version of rom by Karmba. But V7.2 is OK so far. It seems happened when I close Egress reader by click X button then turn off screen by power switch. It then would not wakeup again. But if I close Egress and check the running programs from Task Manager to make sure the Egress is not running at the background, then I can turn on or off the screen freely.
So I think this wakeup problem is caused by some running program that was not closed properly by X button then crash the WM.
That was just my personal finding. Hope it help you guys a bit.

iMate 9502 & 8502 WM 6.1 WWE Telstra 1.73 ROM

Hey guys,
Long time member, but first time poster . I got some good news for you iMate users out there. I was able to get the new WM 6.1 ROMs for both the iMate Ultimate 8502 and 9502, though I was told these were still considered beta ROMs. They are for the Australian market I assume as the Telstra logo displays on the boot up.
I've been using it on my 9502 for the past day or two and it seems to have fixed the following issues:
SDHC is supported now
MS Voice Command is working
GPS does not have to be turned on manually anymore
Camera program memory leak seems to be fixed. I will have to do more testing.
Ongoing issues:
Free Program Memory is still 33 MB after a hard reset
The ROM also seems to fix alot of software compatibility issue I was having. Like some of my SPB software that I normally use is now working without any freezes or heavy slowdown. It also seems to run a bit faster, especially when you slide out the keyboard. Anyways, give it a try. Hope this helps.
iMate 8502 : http://www.megaupload.com/?d=NU4R6EWA
iMate 9502 : http://rapidshare.com/files/129807567/Ultimate_9502_V.01.73_NO_CP.rar.html

Great! Thank you!

Nice.
I went to run the update but it requires a "ROM unlock code"
Anyone know what that is?
Thanks
Dave

Re: ROM unlock code
You may find the code printed on the box you have bought the device in or on www.imate.com after you have registered your imate.
milan

Has anyone run this beta as yet ? Keen to see what the opinions are. If WM6.1 doesn't make the device any more stable then ebay here we come which is a real pity I must say.

Just installed and it works better but yet to install my other software. GPS is missing from the wireless manager but I assume that is because GPS is now always active.
Now there is about 50mb free after hard reset. Might be some more once I get rid of the other start up shortcuts.
BTW I have an 8502 and thanks to the OP. Looks like we may be into a winner here, finally............

milanvot said:
You may find the code printed on the box you have bought the device in or on www.imate.com after you have registered your imate.
milan
Click to expand...
Click to collapse
There it is!!! Thanks! Sheesh iMate is tough :-\
-D

Got it up to 6.1 and it is true the GPS is good to go without a turn-on.
However, with this rom I am NOT able to launch iGo 06 or iGo8. Anyone else have this issue and/or a solution? Note: It was working on the old rom.
Thanks
-D

Please help me....
I have i-mate 8502
I did the upgrade BUT before it I lounched Sprite Backup to save all phone data and settings.
After ugrading to WM 6.1 I lounched Sprite Backup again and... now I have only i-mate blue screen (i-mate sign on it) and phone doesn't go any further....
I would flash it again but my pc doesn't see it now at all.
Maybe you know some way to bring my i-mate back to life?
Please help.... Did i brake it?

Not sure why Sprite would cause that for you. I installed Sprite backup NP. I even, backed up, hard reset and restored with Sprite and not even an error.
Still can't get iGo to work though. I doubt anyone here has an 8502 WM6.0 ROM ??? At this point I would rather go back if I can't use iGo :-(
-D

Taking battery out for 3 hours didn't work...
What else can I do?
Help please...

BIG Problem
Hi,
I've run the upgrade program and it worked fine until the first reset... Now I see the message "Please reconnect to PC and run the upgrade again"... I did this 10 times and nothing... I keep getting the "Connect fail" message from the setup file... The problem is that Active Sync dosen't see anymore the phone connected and I don't think it can anymore... that message seem to be from the bootstrap program or something like that...
Please help...
George B

After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...

Can someone post another link? The original is not working at the moment. Thanks in advance

martin_yo you're my hero.... if you live in poland, i would send you biiiiiig vodka thanx a lot!!! IT'S ALIVE !!!!!!!

imate 8502
OK, I got an XP machine and did the upgrade, went smoothly in about 15 minutes.
Overall I would say it is a worthwhile improvement.
Changes/improvements:-
* PIE scrolling fixed - much smoother, now with zoom
* PIE doesn't freeze any more
* Auto GPS enabling is nice
* Camera seems to start faster
* Threaded SMS is really good (and MMS is integrated now into one account)
* Seems to now stop notifying "SMS Sent"
* Overall perf seems better
* Wireless manager is simpler (I hated the old "solar system" UI)
* Phone settings includes Network Time setting and "battery saver" HSPA setting
* Can change default phone number (w, h, m) from the phone contacts app
Things not fixed:
* Voice call volume appears to be the same
* Select and hold with center button on email attachments still tries to open them (instead of offering to save like every other PPC I have used)
Not tested:
* SDHC support - I don't have a card
Best of all is that it appears to not have introduced any new bugs (fingers crossed).
I am sure I have spoken too soon ...
One thing I did notice was SPB Backup 2.0 stops the phone from rebooting successfully (just stays on Windows Mobile screen forever) if you have scheduled backups on. Seems as if it doesn't like something in the notification queue - so just backup manually. Not sure if scheduled backups on SPB Backup 2.0 worked properly in 6.0?

CrozB said:
Still can't get iGo to work though. I doubt anyone here has an 8502 WM6.0 ROM ??? At this point I would rather go back if I can't use iGo :-(
-D
Click to expand...
Click to collapse
did u try GPSgate? some GPS programs need it!

rafaldabrowski said:
martin_yo you're my hero.... if you live in poland, i would send you biiiiiig vodka thanx a lot!!! IT'S ALIVE !!!!!!!
Click to expand...
Click to collapse
I'm glad to hear that....unfortunately i live in the galaxy far faraway...

martin_yo said:
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
Click to expand...
Click to collapse
I have the same issue with the "Please reconnect to PC and run the upgrade again" message. Unfortunately, the reset doesn't help. As soon as you press the power button that message comes up. I think if we got that message, we've bricked it

mrloopy said:
I have the same issue with the "Please reconnect to PC and run the upgrade again" message. Unfortunately, the reset doesn't help. As soon as you press the power button that message comes up. I think if we got that message, we've bricked it
Click to expand...
Click to collapse
You may be right but in the spirit of trying everything you:-
1) PRESS AND HOLD "Fn and Green" buttons
2) WHILE KEEPING THEM PRESSED press and release the reset hole with stylus
3) CONTINUE HOLDING the Fn and Green buttons until the white reset options screen appears
Fingers crossed for you - if this doesn't work then you are right, time to send it back.

sgh i780 screen can't align pls help

i make hard reset to my fhone,then i can't align my screen,i align my screen many times.nothing happen.

i have the same problem

so,what hapen to you fhone now? my fhone still under waranty,and i send to fmg service centre and they said maybe touch panel problem,did you fix you fhone ready?

Screen Align problem
Me too having the same problem after hard reset

I think its a problem with the latest wm6.1 roms.
Align must be a bit "off" to work...although I havent found a pattern yet...

Download PHM RegEdit, install and create/modify this registry key:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="501,489 781,231 778,770 232,759 232,225"
These should work quite OK

sent back samsung is touch panel hardware problem so change a new touch panel... Thanks, it can not go in to windows at all so cant edit registry

garytanyh said:
sent back samsung is touch panel hardware problem so change a new touch panel... Thanks, it can not go in to windows at all so cant edit registry
Click to expand...
Click to collapse
I could have cooked a version that applies the necessary calibration data via provxml.. but alas it's too late now

FAIROS_IPS said:
i make hard reset to my fhone,then i can't align my screen,i align my screen many times.nothing happen.
Click to expand...
Click to collapse
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!

its nothing happend to me au22ru.. anyone can help plz....

Thousand Thanks, I can skip this part and back to normal.
au22ru said:
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
Click to expand...
Click to collapse
Thousand Thanks, I can skip this part and back to normal.

keep stic on points shown like addsign. not by hands

You guys walking around one main problem.
Touchsreen of your phone appears to be broken, when allign test is not passed its becames by fault of touchscreen. Doesnt matter what firmware do you use. Its just warrancy repair, if you have it. Mostly is replacing of touchscreen.
Donst listen to advises to pass this test is hardware fault.
Cheerz

hi, "welcome.not" worked for my samsung sgh-i780 very good.
I could start my phone without any alignment, but i'm sure, that in near future i will need to change touch screen.
BR
szysiek83

au22ru said:
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
Click to expand...
Click to collapse
Thanks for this tip. Now I can use my phone till the touchscreen is replaced/repaired.

Yeap "welcome.not" worked for me. i connect the device with windows device center since i am using windows 7 . then i naviagte to the root folder of the phone and put a blank welcome.not file and reboot it starts with out asking the align screen and now my phone is working fine. no need of the touch since i have a full qwerty key and a senser mouse. thank you so much.

No way, it must work. It shouln't have 2 extensions 4 example : welcome.not.txt or similar. It should be just WELCOME.NOT.
@au22ru
It's not necessary to copying to root AND root of sd, it could be one root, but i preffer to have this file on sd, because after flash root of internal memory is deleted.
@yonylove
check the attachment. Unzip and copy to your sd.

heineken78 said:
You guys walking around one main problem.
Touchsreen of your phone appears to be broken, when allign test is not passed its becames by fault of touchscreen. Doesnt matter what firmware do you use. Its just warrancy repair, if you have it. Mostly is replacing of touchscreen.
Donst listen to advises to pass this test is hardware fault.
Cheerz
Click to expand...
Click to collapse
hi heineken,
This thread started 2 years ago, but is still relevant for people like me..
My i780 also have TS problem.. at first, it started small only. Align Screen takes about 5x before it aligns, works for awhile, then misalign again. Then I Align again, maybe takes 10x now, work for a while, then not work again. I even re-Flashed ROM.
Now, I try to align it I must have tried tapping crosshairs 100x already, wont get aligned. And I cant quit the Alignment screen so I take out the battery to power off then on again.
From what I understand,
#1.. TS is now broken, Hardware (Screen) problem? no other fix, as you say above?
#2.. This "Welcome.not" solution at first gave me hope.. I thought there is simple fix, until I understand it now.. I think now if I REFLASH Rom, the phone will first ask you to Align Screen and since i cant, Ill be stuck there forever, right? Even if I take out the battery?
Therefore as long as my TS is broken, I SHOULD NOT REFLASH or I will be stuck? Am I right? And if I do get stuck then the solution is "Welcome.Not". (At least there's a way out) Did I get it?
I can still use mouse and keyboard, but Im not happy because I have lots of apps that use TS. Like GPS software when Im driving, as well as many games. It even makes swiping or reading sms hard with defective TS.
Fortinately, I think I may have a solution for me.
I still have that old bricked i780 (dead) somewhere. I bought a replacement and this one Im using now has the defective TS. (Maybe because I buy it 2nd hand.. although it was working fine the first few months)
QUESTION: Can I take the dead i780 to a celphone technician and ask him to replace the TS panel on my current one? That should work, yes? Problem is many celphone technicians are not familiar with the i780 model, but they work with a lot of Touchscreen phones. This should be easy for them to do and it should work, yes? (unless it is a chip issue or something more technical)
The reason Im asking for advice is I want to be careful now who I allow to open up my phone and mess with it. I suspect the last time maybe my 1st phone could still be revived properly but I showed it to many technicians maybe along the way someone permanently killed it.
Thanks for any advice!

Locking the phone and keyboard problems.

This is my first time posting and I think I've done a pretty exhaustive search for the issue I have, but I can't seem to find anything.
First off, I'm running kavanna's 6.1 rom by ricky.
Ran the SDA unlock the first time I flashed it.
Installed the eT9 cab.
Now the problem is everytime I lock the phone (by holding my end call button) and leave it locked for a while, the hold to shift functions of all of my keys disappears. Meaning, holding my 'h' key does not give me a '?' or holding 's' doesn't give me '4'.
Also occasionally, the message button doesn't do ANYTHING at all. Completely unresponsive, again after the phone has been locked.
And the last symptom is that screen doesn't come back to full brightness out of lock. Also happens only occasionally.
I can't tell if it has to do with the locking of the phone or if might be lowlight or what. Any help would be much appreciated even if just to point out that the answer has been glaring me in the face through the search function on these forums. You guys are great, thanks in advance =P
Darrell

endymioncalcite said:
This is my first time posting and I think I've done a pretty exhaustive search for the issue I have, but I can't seem to find anything.
First off, I'm running kavanna's 6.1 rom by ricky.
Ran the SDA unlock the first time I flashed it.
Installed the eT9 cab.
Now the problem is everytime I lock the phone (by holding my end call button) and leave it locked for a while, the hold to shift functions of all of my keys disappears. Meaning, holding my 'h' key does not give me a '?' or holding 's' doesn't give me '4'.
Also occasionally, the message button doesn't do ANYTHING at all. Completely unresponsive, again after the phone has been locked.
And the last symptom is that screen doesn't come back to full brightness out of lock. Also happens only occasionally.
I can't tell if it has to do with the locking of the phone or if might be lowlight or what. Any help would be much appreciated even if just to point out that the answer has been glaring me in the face through the search function on these forums. You guys are great, thanks in advance =P
Darrell
Click to expand...
Click to collapse
What version of rickwatt's are you using? I've been using v24 for a while and I didn't even had to install tha et9 cab, have no problems. If your using a previous version I suggest to reflash to v24 with opera and you should be good.

roloracer said:
What version of rickwatt's are you using? I've been using v24 for a while and I didn't even had to install tha et9 cab, have no problems. If your using a previous version I suggest to reflash to v24 with opera and you should be good.
Click to expand...
Click to collapse
Depends where he's @ based UK eT9|US Tegic both in sig

I'm quite sure i flashed to v24 w/ opera but i'm going to do it re-flash right now just to be sure. Update in a bit =P
======================
edit:
Just reflashed. used v24 w/ opera. I'm in the us, on tmobile so i technically have a dash. i'll try not installing the et9 separately.
======================
edit:
just locked the phone for about 3 min. can't hold to '?' anymore. =( any insights from powers greater than i?

just an update if anybody is still looking at this thread or has ideas.
i've reflashed the phone. first to the offical tmobile rom. the problem of not being able to use my hold to shift buttons persisted.
flashed back to ricky's v24 w/ opera.
i've also noticed that it's not just the holding of the keys for the shift'ed keys that's gone. i don't get responses from any keys holding them down after locking the phone. to clarify holding, 'h' indefinitely does not give me 'hhhhhhhhhhhhhhhhhhhhhhhhh' in a text window and holding the down button on my dpad doesn't scroll through menus.
so i've started looking through registry edits to find something. anybody know of any registry keys for repeating keys? maybe mine got deleted.

endymioncalcite said:
i've also noticed that it's not just the holding of the keys for the shift'ed keys that's gone. i don't get responses from any keys holding them down after locking the phone. to clarify holding, 'h' indefinitely does not give me 'hhhhhhhhhhhhhhhhhhhhhhhhh' in a text window and holding the down button on my dpad doesn't scroll through menus.
Click to expand...
Click to collapse
I'm not sure I'm reading this correctly, are you saying that the buttons do not respond when the phone is locked ? Or, when you unlock the phone, the keypad is unresponsive ??

hehe i'm sorry. after i unlock the phone, the keyboard doesn't respond the same as after a fresh boot in the way i describe above. =P

endymioncalcite said:
hehe i'm sorry. after i unlock the phone, the keyboard doesn't respond the same as after a fresh boot in the way i describe above. =P
Click to expand...
Click to collapse
Sounds like a hardware problem since it still does it with stock.

Try locking the phone by holding down Z.

same result. thanks for the suggestion though =P
Evi1d33d said:
Try locking the phone by holding down Z.
Click to expand...
Click to collapse

i was hoping it wasn't that =/
stylez said:
Sounds like a hardware problem since it still does it with stock.
Click to expand...
Click to collapse

"I think he bricked his freekin' Dash!"

My Dash started acting up the other day and I am hoping someone here can help.
It is responding very slowly to most key presses, sometimes taking 5-10 minutes to, say, open a folder or bring up a settings screen. Sometimes they don't come up at all and it appears frozen, requiring a "yank the battery" reset procedure.
ActiveSync on both home and work PC's detects the device but cannot connect to it.
On bootup, the Windows Mobile splash will be displayed much longer than it used to (3 - 4 minutes) before I finally get a desktop.
The time on the main (top) sliding panel is often the last to (slowly) appear on the display when "waking up".
Email has stopped working in and out. I can receive calls, and Bluetooth is working, but often the ringer will continue for 5 -10 seconds after I answer, and transferring calls to my headset takes about 5 - 10 seconds after that.
Sometimes, settings changes won't "take" and will reset themselves back to their previous values.
Hard resets haven't helped, and nothing seems changed after them, which is odd.
The only thing I have changed recently is I installed the ODSHOW weather thing a few weeks ago (which seriously fubar'd my phone and it was all I could do to get the "normal" top panel back) as far as I know it's uninstalled now.
And all of this started happening after the battery had run completely down and the phone shut itself off. I have already tried another battery and the behavior hasn't changed.
I would love to flash it as I think the problem is the O/S is hosed, but is that possible without being able to connect to a PC through ActiveSync? Say, by copying the ROM package to the SD card and running it from there?
I am running RickyWatts/Kavana's WM 6.1 ROM, btw.
Many thanks if you have any suggestions.
-GoJ

Ghost of Jaco said:
My Dash started acting up the other day and I am hoping someone here can help.
It is responding very slowly to most key presses, sometimes taking 5-10 minutes to, say, open a folder or bring up a settings screen. Sometimes they don't come up at all and it appears frozen, requiring a "yank the battery" reset procedure.
ActiveSync on both home and work PC's detects the device but cannot connect to it.
On bootup, the Windows Mobile splash will be displayed much longer than it used to (3 - 4 minutes) before I finally get a desktop.
The time on the main (top) sliding panel is often the last to (slowly) appear on the display when "waking up".
Email has stopped working in and out. I can receive calls, and Bluetooth is working, but often the ringer will continue for 5 -10 seconds after I answer, and transferring calls to my headset takes about 5 - 10 seconds after that.
Sometimes, settings changes won't "take" and will reset themselves back to their previous values.
Hard resets haven't helped, and nothing seems changed after them, which is odd.
The only thing I have changed recently is I installed the ODSHOW weather thing a few weeks ago (which seriously fubar'd my phone and it was all I could do to get the "normal" top panel back) as far as I know it's uninstalled now.
And all of this started happening after the battery had run completely down and the phone shut itself off. I have already tried another battery and the behavior hasn't changed.
I would love to flash it as I think the problem is the O/S is hosed, but is that possible without being able to connect to a PC through ActiveSync? Say, by copying the ROM package to the SD card and running it from there?
I am running RickyWatts/Kavana's WM 6.1 ROM, btw.
Many thanks if you have any suggestions.
-GoJ
Click to expand...
Click to collapse
Here's what you do.Turn the phone off, holding the camera button down for about 10 seconds , plug the usb cable that should give you the bootloader screen,you can get the official tmo 6.0 on there, it has to be an official rom. Once you got the phone with the 6.0 running, set up active sync and then flash which ever 6.1 rom you want. Good luck.
Here's the link for the official 6.0 rom http://forum.xda-developers.com/showthread.php?t=381726&highlight=official+roms
Her's the 6.1 rom link. I recomend V24 w/opera http://forum.xda-developers.com/showpost.php?p=3315417&postcount=1

Thanks rolo. Let me make sure I have this:
1) Turn off the phone while holding down the camera button for about ten seconds.
2)Release the camera button and plug in the USB cable. Bootloader screen will appear.
3) From the bootloader screen I can put the TMO ROM on.
Is that correct?
Thanks again!

Ghost of Jaco said:
Thanks rolo. Let me make sure I have this:
1) Turn off the phone while holding down the camera button for about ten seconds.
2)Release the camera button and plug in the USB cable. Bootloader screen will appear.
3) From the bootloader screen I can put the TMO ROM on.
Is that correct?
Thanks again!
Click to expand...
Click to collapse
No!
1. Turn off phone
2. after phone's off, press and hold the camera button.
3. after holding it for about 10 seconds, plug the usb like you're gonna use active sync.
4.That will give you the bootloader screen, and you can now install official 6.0.
5. after you got 6.0 set. set up active sync.
6. I would wait about 10 or 15 minutes, then flash 6.1

roloracer said:
No!
1. Turn off phone
2. after phone's off, press and hold the camera button.
3. after holding it for about 10 seconds, plug the usb like you're gonna use active sync.
4.That will give you the bootloader screen, and you can now install official 6.0.
5. after you got 6.0 set. set up active sync.
6. I would wait about 10 or 15 minutes, then flash 6.1
Click to expand...
Click to collapse
Ah! Ok, now I have it in bootloader mode. Thanks.
I d/l'd the Official TMO_1.22.531.6 file and unpacked it, but the 40 MB RAR file contains only a 60 KB(?) file named RUU_signed.nbh
What do I do with that?

Ghost of Jaco said:
Ah! Ok, now I have it in bootloader mode. Thanks.
I d/l'd the Official TMO_1.22.531.6 file and unpacked it, but the 40 MB RAR file contains only a 60 KB(?) file named RUU_signed.nbh
What do I do with that?
Click to expand...
Click to collapse
the phone should recognize the 6.0 rom update. If it doesn't, unpack it again, wait until the screen ask you if you did everything to establish connection, click next and attempt the bootloader sequence again.

ah-HA!! I did it! Officially un-bricked! I downloaded the latest ROM for the T-Mobile site.
ActiveSync now works, I can receive Outlook email, and have even paired up my Aliph Jawbone via Bluetooth! Thanks so much Rolo!! You rock, dude!
I think I might wait a bit before flashing a custom ROM. I'd like to have sliding panels and such, but I'm not in a hurry.
-GoJ

Tweaked removed post as you obviously found the other .zip needed

Ghost of Jaco said:
ah-HA!! I did it! Officially un-bricked! I downloaded the latest ROM for the T-Mobile site.
ActiveSync now works, I can receive Outlook email, and have even paired up my Aliph Jawbone via Bluetooth! Thanks so much Rolo!! You rock, dude!
I think I might wait a bit before flashing a custom ROM. I'd like to have sliding panels and such, but I'm not in a hurry.
-GoJ
Click to expand...
Click to collapse
I'm glad everything worked out well

Same problem with an O2 XDA COSMO.
To put it back to live I need an original O2 XDA COSMO Rom.
Please help or I have to put my loved Cosmo to the bay.

chubbichubbi said:
Same problem with an O2 XDA COSMO.
To put it back to live I need an original O2 XDA COSMO Rom.
Please help or I have to put my loved Cosmo to the bay.
Click to expand...
Click to collapse
Yep, you need the official rom that the phone used from factory. Check for your rom on the official rom thread on the sticky. You might want to pm profezza and ask him if the O2 XDA Cosmo, Orange SPV E600 and the Rogers HTC S621 use the same rom. If they do, he has your official rom there.