I have several BA (Qtek 9090PH20B 0 B WWE E BRIGH001 1.40.00 0 0 1.13.00 13.00) in my firm , I succesfuly updated 4 to WM5 TuMa 1.3 but with 5'th I got a problem after upgrade camera did not work , so I decided to reflesh again to WM5 TuMa 1.3 , after that BA culdn't start only bootloader SERIAL or USB 2.06 . I try to reflesh with WM5 TuMa 1.3 and with original flash, first two stage is OK but at 0% in stage tree BA power off and get error 112 could not write CE ROM. I try also with mtty and set 14 0 .. task 28 nothing work so I decide to flash over SD all tree ROM's from upgraded BA , and when start restore ROM's from SD after few minutes I got DOWNLADING FAIL after that i could not put BA in bootloader mode with combination power+record+soft resert .
Please advice, HELP
How can I relive BA or my pay check will be 500 $ shorter this month
How to...
There are usually problems in downgrading WM5 ROM, better try to downgrade your BA to WM2003SE and then if you wish try to reflash any new WM5 ROM for your pleasure...
Re: How to...
Surgical said:
There are usually problems in downgrading WM5 ROM, better try to downgrade your BA to WM2003SE and then if you wish try to reflash any new WM5 ROM for your pleasure...
Click to expand...
Click to collapse
OK BUT How to PUT BA in BootLoader if combination of Power+Record+SoftReset wont work
I think it is time to get it to a service point and there they will repair it
Related
Has any one managed to update an imate PDA2K with the latest rom. I have tried the up date trick in the forum
[CHECKCEID_TYPE]=1
But I stll get a Country ID Error?
Hrlp
I have upgraded my XDA 2s from o2's original FW to I-MATES latest,
It took several attempts! I kept getting ID error 212212122 kind of thing.
I then tried a USB 2 computer as my USB 1 comp wasn't cutting it and kept resetting the machine half way through :/ thought i'd turned it into a brick, but once i'd tryed it 3 times on USB2 it finaly worked! And I had to add the extra line that you did as well, keep trying
Make sure you know what your Original Firmware is! otherwise you'll be trying to install the wrong FirmWare or ROM update.
Check the wiki, beginners section, search my posts.
I'm now running I-Mate latest FW. its ten times better than O2s old one!
best I can do hope this helps. choppidge.
Upgrading iMate to Latest O2 Rom
Thank you for the advice. Did you upgrade from iMate to 02 or O2 to iMate?
My machine is a USB 2 machine and no matter how may time I tried I got the country ID error.
In the past I have managed to update my iMate to the O2 Rom with previous versions, but when I have tried to update my iMate with the latest ROM I get the Country ID Error -12121212 etc.
Has any one manage dto put the latest O2 Rom on an iMate Blue Angel?
If so please tell me how.
You need this ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
put it in your upgrade folder and round it , should be no problem , I did o2 to I-mate and Dopod to I-mate n times already.
if got the error on the 1st run with the no-id, run the no-id 4 the 2nd time, it works 4 me, i've flash my pda2k to o2 1.40.00 WWE :lol:
Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
My first post !
Hi, for the reset problem I suggest you to look to the wiki, you will find some types of strategies to fix this, it seems to be a battery problem(just my opinion). For the upgrade you have to look wath's the boothloader version of your device. If you have 1.00, you have to upgrade the boothloader before flashing a new wm6 rom. In any case you will find all this and other informations in the wiki. When you will be done, if you want, I will suggest you the best roms available .
P.S.: excuse me for bad english.
keleric said:
Hello
I am new here, i have a qtek 9000 that run wm5, what should i do to up-grade to wm6. What up-grade do you suggest i need in order to increase the performance of my phone.
Here is all the information that i have on the phone.
rom version : 1.30.77 wwe
rom date 02/20/06
radio version; 1.11.00
Protocol version: 42.45.P
ExtROM version: 1.30.9090
The second problem that i hace is that the phone is constanly reseting, i don't know why, but when battery reach approx. 80% it turn off and reset. Then i have to plug in the charger in order for it to restart? Can anybody help me
thanks
Click to expand...
Click to collapse
before upograding you have first to make a lot ( I really mean it) of reading thru 1) XDA_wiki and 2) all 3d you can on the different wm6 available ROMs ( see upgrade wm6 section) You can have an idea of what are the problems users have/are encountering.
My 1 cent
a)Enter into bootlader mode ( pls don t ask how, look and search) and find out if you have a G3 device ( vers 1.0x) or G4 ( vers 2.x) . Depending on this you have to first check if the ROM upgrade you ve selected among the different available is OK for your device. Few ROMS infact have different version for G3 and G4) . If you have a bootload vers 1.0 or below, first upgrade to a more recent version before even thinking to upgrade ROM.
the upgrade Bootload tools are available in general on your device site ( I have an Imate , I have the sw there) or look and search here....in this site there is EVERYTHING! go to the ftp section , link unders XDA-Wiki, Universal and search
b) upgrade to Active e Synch 4.5
c) Create a folder where you ll put the selected Wm6 version that you ve picked and unzip it.
d) You ll see the following files:
EnterBL
Get device data
RUU.conf
Ruu.dl
Ruuenc.dll
UI.dll
ROMUPGRADE.exe AND !!!!
nk-.nbf ( this is the ROM UPGRADE)
ms.-nbf ( this is the external ROM)
This is almost all what you need to start to upgrade. Infact you might also want to upgrade to a most recent radio version ( radio._nbf) . I am using 1.15 that is very stable and powerfull but pls read comment of users using the selected Wm6 you ve picked and check their coments. A higher version is not implicitely a better version.It depends on Wm6 rom version and the operator you re using.
Therefore, if you want to upgrade the radio as well , proceed to the FTP of universal, and download the radio version you like . Unzip the file , copy and paste JUST the radio._nbf file to the folder above created.
e)Connect to AS and make the last synch before the upgrade and disconnect
f) take sim and sd card out.
g) put down firewalls and antivirus on your PC
h) open AS and uncheck File/connection Settings/ USB connection
i) connect device to PC, you ll see AS wont start ( of course)
l) enter into bootloader mode
m) click on Romupgrade.exe
n) follow EXACLY instructions on your PC screen...be cool, be patiente. It will take some 20 minutes....
when everything is finished , disconnect , do a NORMAL soft reset and here you are.
Flag again USB connection in AS and synch. you have now a wm6 version. I am using Ranju 7.1 and it flys as an angel on my JJ, but I suppose there are plety good ones around
i want DopoD M700 update
Try B&B4.3, u will impress with this rom.
Anyone know where I can get the Dopod M700 CHT Rom beside from DopodAsia? Thanks!
Does B&B4.3 for artemis / P800 ? the buttons are different..
M700 got different buttons alocation. No GPS.
I'm looking for WM6.1 Vanilla specific for Dopod M700 only
-
I'm using Dopod M700 too.
You can use Black & Blue 4.3 or 5.0 (but 4.3 is better) or the best one is Artemis Touch 4.01 (or maybe 4.02 better, I'm testing 4.02).
All of them work good with GPS
Those ROM is for Artemis & Dopod M700 is Love, so you have to change the button setting, it is so easy.
Ok, I found the Dopod P800W CHT Rom from somewhere and flashed my Dopod M700 by editing the hex file to match the Model ID. However, after flashing the Dopod P800W CHT Rom, my Dopod doesn't show EDGE connection but just GPRS. I'm sure that it was EDGE connection with my previous ROM. Anyone know how to get back to EDGE connection? My previous ROM and current ROM are:
Previous ROM:
LOVE 1.3 WEN WWE
Rom Date: 16/11/07
Radio Ver: 03.07.90
Protocol Ver: 4.1.13.51
Current ROM: (File Name: P800w_TW_CHT_WM6_Upgrade_20070713)
3.7.709.1 CHT
Rom Date: 21/6/07
Radio Ver: 2.67.90
Protocol Ver: 4.1.13.51
Ext_Rom Ver: 3.6.709.101
Even I flashed the radio Rom to 03.07.90 or 03.12.90, the connection still at GPRS status. Even the Model of P800W and M700 are EDGE unabled in Taiwan. Therefore, I don't know why the EDGE doesn't appear on my connection.
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Pardoon said:
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
Click to expand...
Click to collapse
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
lamjeff said:
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
Click to expand...
Click to collapse
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
tan880121 said:
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Click to expand...
Click to collapse
i have already update the spl to 1.11... btw, can u let me know how to go to serivce mode ..... coz right now i try to use usb cable to connect the pc... no response.... help help
y_bother said:
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
Click to expand...
Click to collapse
Thanks for your information... I have work on this machine over 10 hrs to search over the forum here.... at last i can flash it when i press record and reset button and at the same time connect with usb cable ...... after that i can flash it thru PC ...........
tks...
hey all I am new here and i will be pretty happy if you guys can help me solve the problem i've got with HTC P3300 (artemis)
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
please help me thnx
Darren.
Did you cid unlock?
What is your SPL?
read this: http://forum.xda-developers.com/showthread.php?t=308242
Cheers
Im pretty sure it is unlocked because I did install the USPl by poof and i did try to install the original files but it still giving me errors ! What can I do we talk about 1 month phone !!! please help me SOS
Why would you want to downgrade to WM5? WM5 was a pain in my arse. so many problems I could have smashed my phone with a hammer (estwing of course) a thousand times. Have you tried to upgrade instead? a new batch of diamond roms is looking like an awsome possibility at the moment. Aside from that, are you using vista or xp?
I get the same problem: after 2% the ROM Updater (at my point this one: "HTC_1.12.405.01_026790_WWE_SHIP") says: 244 Invalid Model ID.
Also, I previous installed USPL (again) via the Artemis_USPL.
I did an update to the "Artemis Touch 4.02 Full with 4 sided cube" ROM before, so if there would be a problem with that?..
For me all the WM6-based ROMs are too slow for an 200Mhz-Phone, e.g. my Phone needs like 10 seconds to load the contacts (no other software is running at the same time..). So its getting a little on my nervs..
I tried to find a WM 2003SE ROM for the Artemis, but there is no such Version.
Any suggestions?!
edit: I am from Germany, so is this "HTC_1.12.405.01_026790_WWE_SHIP" ROM not compatible with a german HTC Artemis?
hm, if i remember correctly this is all about the different bootloader versions...
could it be downgrade (in bootloaders) is not possible..???
we had some of this here:
http://forum.xda-developers.com/showthread.php?t=282195
then again check with the versions here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
maybe this works ( though its french):
http://forum.xda-developers.com/showpost.php?p=1520661&postcount=13
and:you must use uspl before you try another rom, it might have been altered by another rom!!!
but seriously no wm5 is faster then yue extraclean!!! or comparable
greetz
another idea:
take out your sd card when trying to flash,
alternatively try sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
thormdac said:
but seriously no wm5 is faster then yue extraclean!!! or comparable
Click to expand...
Click to collapse
how faster is it than a normal wm5 rom? are there any pictures to see how it looks like?
dor515,listen to the guys wm5 sucks,really...and for those 200mhz...try overclocking with batterystatus...you can get 247mhz all the time (which is preferred) and if you want you can set up to 300 (at your own risk)