Related
I tried charging my Jas Jar via this Belkin soution (auto adapter model # USB-CLA) that I purchased for my Dell Axim X30. I had assumed it would provide power to any device that could charge via USB, but it does not provide a charge to the Jas Jar. I also tried the Belkin AC (wall) adapter but it still did not charge the device.
Does the Jas Jar require a higher output auto/wall charger, perhaps something like this BoxWave product? Has anyone found anything that works?
I have tried my el cheapo car charger usb bluetooth headset charger
and it charges fine with usb in my car..
autocharger
Autocharger for Universal is the same like autocharger for MDA Compact (HTC Magician). Now, my Universal is charged from this and it works great! And another advantage is, than autocharger fot Magician is very cheap at the shop of T-mobile..
Hi, I have a TMobile MDA Pro and i have purchased an in car charger so that I can use it with TomTom satnav unit, slight problem, unit does not charge when in the car. Bizarre, as when I use the standard USB Charge & Sync cable with PC happily syncs and charges with no issues. Anyone any ideas, does there have to be a specific setting on the unit to enable it to accept charge via the cigarette socket in car?
Many thanks
I found that to charge the universal, pins 4 and 5 in the mini USB plug need to get joined together - by default pin 5 is not connected to anything (well, wasn't in the cable I had). I've made that modification, and am powering a couple of devices of of a 2 port hub in the car.
Cheers,
Steve
Hi, sounds like a problem I am having and meaning to ask about.
I've got a USB cigy lighter adapter and tried plugging in the sync lead to provide power when it's in the car. So if I have my Exec in standby the charge light will come on (I think it charges sitting on the today screen, but not to sure) but as soon as I fire up tomtom the charging light goes off....
Does this sound like your problem, or are you not charging at all?
I'm interested in finding out what I need to charge the Exec while it's running tomtom? Anyone have any ideas?
Cheers
Matt
I'm pretty certain that I didn't get a charge light at all with my cable until I modified it, then it works, as expected, including in TomTom.
To confirm what I've got is:
- A Ciggy to USB socket adapter
- A two port hub plugged into the adapter
- Modified cable into the hub (along with an unmodified cable connected to my BT-77 GPS unit).
Plugging the cable (prior to modification) directly into the adapter, rather than the hub, didn't work either. The Brodit all-in-one adapter/cable worked fine (and I still have it intact, but not in use), but if memory serve, pins 4 & 5 appear to be connected. I used a multi-meter to try and find out why that one worked, and my combination didn't.
All of this stuff is wired in behind the centre console, so I've not got any unsightly wires, or anything.
Cheers,
Steve.
I think you need a car charger that can output 1000mA to charge the Universal. Same requirement also for an AC charger. 1000mA is what's important. Cheers
Hi, We have had quite a few customers with this issue, we advised and they have opted for the brodit active mounts which have the inbuilt cig chargers and it has cured the problem, or for the neater solution they went for the Molex hardwired versions to stash the cables behind the dash area,
The codes are: 968649 for the cig charger version or 971649 for the Molex hardwired version, http://www.dsldevelopments.com/brodit/holder/T-Mobile+MDA Pro-Brodit-Holder.asp
Hope that helps, drop me a line if you need any advice,
Thanks again
Bryson
Found 1A 5V car adapter
this is the only place I found off ebay that has a 1A car adapter
http://cgi.ebay.co.uk/CAR-CIGAR-CIG...4QQihZ006QQcategoryZ15329QQrdZ1QQcmdZViewItem
It works fine on my MDA Pro, just need to plug it in while it is off for it to start charging.. if turned on, then pluged in, then it won't start charging.
I even have an 800mA adapter, but that doesn't help the MDA Pro, it needs more power!
bryson said:
Hi, We have had quite a few customers with this issue, we advised and they have opted for the brodit active mounts which have the inbuilt cig chargers and it has cured the problem, or for the neater solution they went for the Molex hardwired versions to stash the cables behind the dash area,
The codes are: 968649 for the cig charger version or 971649 for the Molex hardwired version, http://www.dsldevelopments.com/brodit/holder/T-Mobile+MDA Pro-Brodit-Holder.asp
Hope that helps, drop me a line if you need any advice,
Thanks again
Bryson
Click to expand...
Click to collapse
Hi there Bryson
The items you quoted are actually the charger and the holder for the PDA. I also notice from the link you provided that there are 2 cig chargers (items codes 942625 and 942650). Can I know what are the differences between these 2 models and would either of this chargers charge the Universal while it is running a navigation software such as TomTom or Garmin Que?
Also, do you ship to Singapore?
i got an OEM car charger for the O2 Exec and it does not seem to functiona as expected. here's why:
- when the o2 exec is turned on (either running a navigation program or not) and the car charger is plugged in, the o2 exec would not charge.
- when the o2 exec is turned off and the car charger is plugged in, the o2 exec can finally charge. however when i start a navigation program, it would show that it is charging but the battery capacity does not increase and after a while, the unit will automatically switch off after a while. while on battery the unit does not turn off automatically after some time.
is there a problem with my car charger or is this normal for all car chargers? is there any way to solve it?
all help rendered is much appreciated.
I've had very mixed results with twelve different models of aftermarket car and mains chargers for the Exec.
The models that list their output at about 550mA seem to exhibit the troubles you mention - you need to switch on the Exec after the charger is working and even then with a high drain their output is not enough to power and charge the Exec at the same time.
The models rated as 1A output seem able to power the Exec and charge it at the same time. The o2 supplied mains charger is rated at 1A.
I've seen similar things with computer USB ports, especially laptops.
Thanks astage for your input.
The thing with the car charger that I have is that it is actually rated at 1000mA or 1A and thus I thought it should not pose such a problem. But apparently it does. Is there any way for me to check what is the exact output for the car charger? I am kinda alien to electronics and circuits board.
The thing is that You ll have to get special charging USB cable. I was trying 4 cables and finally 5th was working - it was cable for xda-2. Try it for Yourself.
It have something to do with wiring 5th line - normall usb cable have 4 lines connected.
Aha - one more thing - Your original Universal cable wont work ...
best regards,
Piotr E
Could you tell me where you bought it? Was it an online shop or a physical shop?
I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.
i use my car charger from my gps that is the Holux 236, the only think i have to do so that it starts charging is turn it off on the button and the led will change to orange, i have tried one other charger that has a usb plug and it worked fine ! So has long as it has a usb plug you'll be alright and if you do not find one look for the Motorola car plugs that it will probably work on Uni since it has a mini usb plug
The charger from M3000 works fine with my Uni
And the Motorola Mini-USB chargers doesn't work...
Hi, I found that this issue is connected with proper usb cable not with charger itself (usb mini have 5 connector but in some cables only 4 are connected and in some other cables all 5 are connected and so are the difference). I was also trying many chargers and no luck. But I ve tryied charger with other cable and suddenly all chargers start charging my jasjar.
Anyway, the bad thing is it stops whitout any reason so now charging jasjar in my car is a real mystery for me.
regards,
Piotr
Be careful if buying one with a double USB output - I bought a few different models hoping to power both Exec and the Holux GPSlim-236, but all failed. They would power the Exec, but as soon as the Holux was connected, it would always cause the Exec to continually reboot - fortunately "soft". Make sure the supplier will take them back if it doesn't work.
Try a car charger with a USB socket on the end that takes a separate Sync/Charge cable.
The problem is, the exec is very power hungry, especially when the batt is dead !! you need a high current charger at least 1A (1 amp) the charger used with the blackberry (I forget which model) is suitable as is the genuine exec charger obviously.
use O2 Atom car charge
O2 Atom car charge will work with O2 Exec as well as A/C charger from Atom
Exec/SPV car charger...
Got an o2 branded one today for the Exec/Mini - works like a charm (Charges my SPV and runs Tt at the same time) but cost me £14.99 for the privelage!
could you post a link to the website? I would love to purchase one but am currently located in Singapore and so far all the charges don't seem to work for me.
vapor said:
I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.
Click to expand...
Click to collapse
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards
southernint3l said:
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards
Click to expand...
Click to collapse
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.
vapor said:
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.
Click to expand...
Click to collapse
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.
southernint3l said:
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.
Click to expand...
Click to collapse
sounds great. I have gotten your email and replied. Hope we can come to a decision soon and I can get my hands on the charger.
if anyone else has any for sale, do let me know as well.
Car Charger for UNI - how to make working
Hi All!
I've also tryed 2 diferent car chargers and 1 USB Pluggable Car Charger (some noname chineese 3-rd party) with 3 diferent cables, and one 3-rd party AC Power Charger. They ALL worked strange.
I can confirm that to make them all work I should:
1. Switch off the Universal;
2. Plug in the chgrer in to Universal;
3. Wait until the Red Light on.
Now I may turn the Universal On, and see the "Charging" battery status.
The reason and how to fix:
As you may see I used different adapters. All they have from 0.5 to 1.0A output circuit. But, the USB ports I used with my laptops have only 0.5A output and always start charging the Universal.
So, I dont think the output power is the reason.
The most likely - it is the "5-th pin" issue, which is mentioned above here. Can somebody provide information about power connection for the Universal?
It seems the solution is about to interconnect/short circuit 2 wires in the car adapter' cable to make the Universal charging in a usual way with any of my (your) "non-working" car adapters.
Also, I've noticed, that in a case the battery level around 30% and I plug in the "non working adapter" and no red light and system not is in the "Charging" state -- the battery is charging anyway!
Also, let me remind you about another issue that the Universal have: Active Sync (older versions) would not sync (USB Device not recognized error) if you plug in the Universal if the power is On.
To workaround that you have to switch off the Universal, plug the cable and after that you could successfully sync. The same symptoms? May be the same reason?
I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.
man why is it such a complicated issue to get the universal to charge? and it seems that this charging problem only happens to the universal and not any other device, am i right?
nabuhonodozor said:
I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.
Click to expand...
Click to collapse
YESSS! I Have upgraded to on of that Aku3.2 recently! May be it is the reason! But, my original Power adapter still charges my Uni so does the USB conndction to the laptop...
To ALL: Could you please confirm that you can use third-party adapters with the older ROMs?
hopefully we can get some updates soon.
Are all chargers alike?
Are all chargers the same? I would think that the USB power rating would be the same. So, I should be able to charge the Jasjar using a charger for a Motorola RAZR (if I weren't so afraid of blowing up the Jasjar)
My himalaya has stopped charging through the cradle or car charger. It syncs and charges through the usb and my wired sat nav connects up but neither method charges my phone anymore. Obviously the battery will die down quick when I use my tom tom so I need that to work and only being able to charge via usb is a pain and inconvienient.
What can I do to fix it??
What kind of charging connector your PDA has? ie. my universal has a mini usb, it is used to charge/sync, it can be done at the same time, on the contrary an old Ipaq (series H38XX & H39XX) had two different ways for power to arrive to the PDA, this means that you could charge it with its charger or via usb while syncing or just charge via usb.
Why am I asking this?
In this way I'm trying to understand if you could have a problem with a connector/cable (different connector for charging with the craddle/car charger and usb charging) or you could have other problems.
If it's possible for you, take some pictures of your pda's syncing and/or charging connector, to your craddle, car charger and usb syncing/charging cable.
Possible causes for your problem are:
Defective craddle/car chargers, defects can be not the chargers themselves, but the cables that go from the chargers to the PDA.
Defective/unsoldered PDA power/charging connector, it is not so unusual that after you pull the cable too hard, without pressing the unlocking secures (in case your cables have them), accidentally hit your charging cable/craddle or the PDA itself while they are tied togheter you cause a malfunction due to a false contact or a broken cable.
See if one of this might be the cause in your case, how? Can you have a borrowed craddle/car charger to verify if yours are ok?
Try to move the charging cable/craddle or the PDA (easy and carefully) to see if the PDA begins to charge.
Let me know how it goes.
unfortunately I don't know anyone that has an XDA - so no other chargers unless I try the o2 shop.
THe XDA has a cradle with a usb connector that can charge and sync and also a mains lead which plugs into the cradle or there is a little adaptor piece(which I've lost) which plugs straight into the xda to charge. I stiooed using that because it would push in properly.
My thoughts are that its the PDA itself as the car charger was only bought december whilst I have had the PDA and cradle since 2004 and they both stopped charging at the same time. The adaptor stopped chargin in the summer.