Related
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
I have a parrot 3200 in my car is it posible a can have the sound of tomtom 6 on my p3300 with bleutooth connection by parrot in my carspeakers.
Can somebody tell if it possible and what must change in my phone.
Thanks.
http://forum.xda-developers.com/showpost.php?p=1396007&postcount=2
BTaudio.cab d'not work
Fracoon said:
http://forum.xda-developers.com/showpost.php?p=1396007&postcount=2
Click to expand...
Click to collapse
Ihave downlaod btaudio.cab on my phone with rom B&B 4.0.
He answer me always "failed to enable BT audio".
you can tell me what I do wrong or it will not work with this rom.
Thanks.
i have b&b v4..... for me it works fine....
1. Pair your device
2. Set the device as Hands-Free
3. Make sure you are near enough and have activated bluetooth
4. Run BTAudio
its the way it works for me
try this one.
PS: Start BT Audio before u start anything you want to hear over bluetooth
Works perfect now. Using is important
Fracoon said:
i have b&b v4..... for me it works fine....
1. Pair your device
2. Set the device as Hands-Free
3. Make sure you are near enough and have activated bluetooth
4. Run BTAudio
its the way it works for me
Click to expand...
Click to collapse
Works perfect. Thanks for instruction.
I can't get it to work in my car! I have a JVC BT1 and it has bluetooth built in. It works fine with calls (i.e. thru speakers) but tom tom only goes thru the unit. So I tried this BT thingy and it doesn't work. I can turn the program on but still nothing. What does it mean, set the device to handsfree?
Thanks
Jon
I have the O2 Orbit with Co-Pilot software that came with it. I connect the Orbit via bluetooth to the intercom system on my motorcycle. The phone connects automatically every time and I can receive calls as I ride, and listen to WMP (though I prefer to use my ipod).
I set the Co-pilot running the other day but none of the commands would come through the bluetooth connection into my helmet. Do I have a setting wrong or will this not work?
Thanks in advance.
You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio
mikealder said:
You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio
Click to expand...
Click to collapse
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...
you need to turn the app on if you go to the bluetooth menu and while the helmet is turned on touch and hold the helmet bluetooth name and select set as bt audio if this is not present the use mikes method it all depends on wheather the helmets bluetooth is compatable with the artimis
Garneth said:
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...
Click to expand...
Click to collapse
Two ways to do this - get a bluetooth headset that supports A2DP streaming ( I have a Sony DR-BT30Q) then all audio comes through the headset.
Alternatively, use VJvolubilis (http://www.vijay555.com/?Releases:VJVolubilis) - you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device. It worked for me on a BMW car kit!
Thanks guys.
Alix, I'll try that when I get home. The b/t must be compatible as I can receive phone calls on the bike and listen to WMP.
TT, I have no choice but to keep the headset I have as it is part of the wired intercom system and is fitted into my helmet. The b/t connectivity comes through a dongle supplied by the intercom manufacturer and sits beneath the seat with the intercom controller. It works fine with some apps, but just not Co-Pilot.
Not sure what this means :
TangerineTractor said:
...you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device.
Click to expand...
Click to collapse
Thanks again.
Hi guys, I have the following question:
I am planning to buy e bluetooth GPS receiver for my Prophet. In my car, however, I have a bluetooth hands-free system installed. So my question is, will it be possible to have both the GPS receiver and the hands-free system connected to my phone at the same time?
Thanx,
Boyan
Seriously, no one has tried this before? I suppose it should be working, but I really don't want to spend the money on a GPS receiver and not be able to use it simultaneously with my car kit...
hello there blazarov,
it will work, and yes many have already got this up and working.
Search for SIG or Piconet or simple Bluetooth on say Google
and it will get clear to you.
I have experienced i have to let Tom Tom activate bluetooth
and then my Rikaline GPS receiver and my Parrott carkit work.
In this order it goes well.
When bluetooth activated and connected to my Parrott carkit and then activating TomTom it can't find/connect to my Rikaline GPS receiver.
btw i use Qtek S200 ( = HTC Prophet)
480 said:
hello there blazarov,
it will work, and yes many have already got this up and working.
Search for SIG or Piconet or simple Bluetooth on say Google
and it will get clear to you.
I have experienced i have to let Tom Tom activate bluetooth
and then my Rikaline GPS receiver and my Parrott carkit work.
In this order it goes well.
When bluetooth activated and connected to my Parrott carkit and then activating TomTom it can't find/connect to my Rikaline GPS receiver.
btw i use Qtek S200 ( = HTC Prophet)
Click to expand...
Click to collapse
Hi,
Thanx for the information! It is also good to know that the combo works with a Parrott carkit, as i have the same one in my car
Is there an app or cab that switches the BT of the Rhodium automatically to on when connecting to the Parrot BT car kt?
thanks in advance,
regards, Kuzibri
hmmm, how do you expect the app to know that you're going to connect to car kit, if the only connectivity is via bluetooth?