Related
my Button lock will not really work. After i turn off my device (MDA III), the 4 Hardwarebuttons on the Frontside do open Programs. (Backlight and display is off!)
Then i turn on my device, i can see open Software!
any idea?
yeah, mine does that, its really annoying, its normally the contacts and stuff. i just set them to the none profile, cos they did my head in. 8)
now i find a way, it´s possible to fix, if you are using Batterypack from Omegaone!
set all Frontbuttons at none, do a softreset after few seconds, then use PowerButtons from Batterypack to make youre settings
now it works fine!
WM5 blueangel - Button lock option no more available
I used to lock buttons on WM2003 -> no more available WM5 on blueangel orange SPVM2000.
Any idea?
PS: I implemented all CAB patches from WM5 mamaich, still not working.
you can copy the button lock app from windows 2003 and it works perfectly well on 2005
drunkmonk said:
you can copy the button lock app from windows 2003 and it works perfectly well on 2005
Click to expand...
Click to collapse
Anyone know where i can get the app from to copy to my device pelase.
Anyone know where i can get the app from to copy to my device pelase.[/quote]
Its ok found them, thanks
http://forum.xda-developers.com/viewtopic.php?t=27614[/url]
Silence Ringer
Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.
Thanks for your help in advance.
i don't have mine yet, but did you try the joggr when the call comes in?
Yep tried that.. Even put the JOGGR in volume only mode, and that didn't shut it up either... I know on a lot of other phones you tap the power button to shut it up, but no button's will do it.
I'll keep trying..
Argh, I've still not had any luck in finding a way to shut it up when a call comes in.. *sigh*
I don't think there is a feature to do what you want. Ignore or the end button send it directly to vm as you no doubt have figured out already.
I can touch the volume strip on the dash and it mutes the phone call.
I know, not very helpful, but thought i'd let you know.
am-imate said:
Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.
Thanks for your help in advance.
Click to expand...
Click to collapse
Look in the registry around:
\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\
There's a key there called EnableRingVolumeMute
If there isn't, try creating it and setting it to 1. Mine seems to mute the call fine with that setting.
Ringer silencing on Dash
Hitting the "reduce volume" slider on my dash silences the ringer -- no registry hacks needed. Don't know if this works on HTC unit...
El Perfecto!!!!!!! The registry hack worked on the S620.. Apparently it comes with EnableRingVolumeMute set to 0.
Muchas thanks!
This needs to go in a FAQ.
Change JOGGR Outlook key to something else?
Has anyone figured out how to change the JOGGR's launch outlook button (bottom button) to launch something else, say, FlexMail? Even though I have FlexMail set as the default mail program, it still launches Outlook...any ideas?
I hate Outlook email (it does not work well with IMAP, like, it won't delete things unless you resync it manually. Painful!)
jason
Never mind...
Got this from www.smartphonethoughts.com just now:
Well that sure didn't take long. Just 1 day after the Dash hit the streets, akil, staulkor, and some others over at Howard Forums has found a way to change the functionality of the volume jogger on the Dash to include scrolling and launching programs. You'll need to modify the registry to get this to work. So, make sure you back things up before making any changes. Here are the changes you need to make to get this working.
To Enable Scrolling:
• HKCU\ControlPanel\JogBar\Settings\SwitchToAudioFunc = 0
Tap on Bottom Key Launches IE Mobile:
• HKCU\ControlPanel\JogBar\Settings\BottomKeyApplicationName = \Windows\iexplore.exe
Tap on Top Key Performs Back
• HKCU\ControlPanel\JobBar\Settings\TopKeyApplicationName = BACK
You can replace any these with your favourite applications. Other common applications would be START (to Launch the Start menu), \Windows\tmail.exe to launch Outlook Mobile, or http://www.SmartphoneThoughts.com to launch IE Mobile with your favourite website Wink Let us know how you make out!
Here is a utility I wrote that will let you change almost all of the JOGGR settings on the phone. It will also let you change the apps that launch when you press the Camera key and the T-Zones key. The app shortcuts must be in the shortcut file format because I didn't know enough about the Windows CE LNK format to simply let you pick an EXE.
I am going to add support to let you change the apps that launch from the JOGGR bar, but wanted to get this version out now so you don't have to dig through the registry to get scrolling working.
It requires the .NET CF 2.0 or higher.
Sweet, good job! Will give it a shot.
This would be a good base for a simple DASH/S620 tweak util.. 'Cause there's a couple good tweaks out there as well.
Is there a way to do this on the Dash without having the touch strip/jogger enabled. So basically all I want it to do is silince the ringer.
which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.
pphi said:
which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.
Click to expand...
Click to collapse
The version for the ARMV4I is the correct one. Try the installer at http://www.microsoft.com/downloads/details.aspx?FamilyID=0c1b0a88-59e2-4eba-a70e-4cd851c5fcc4&DisplayLang=en. That link will take you to the .NET CF 2 SP1 MSI file.
Works like a charm. Very nice job
I have .NET CF 2.0 spk1 with a T-Mobile DASH.
But still does not work
etperez22 said:
I have .NET CF 2.0 spk1 with a T-Mobile DASH.
But still does not work
Click to expand...
Click to collapse
What doesn't it do? Does it even run?
Basically when I run it it gives an Error.
An unexpected error has occurred in the DashConfig.exe
Select Quit and then restart this program or select Details for more information.
When I hit details:
UnauthorizedAccessException
at System.IO.__Error.WinIOError()
blah blah blah.. basically a whole lot of errors
I would love for this to work..
Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard
What exactly does this do, with Phone Pad? Sounds interesting
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard
sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."
Hey thanks for converting to WM6 I had been missing it for awhile now!
Any chance this will work in WM5? Please and thanks.
Yeah this is soooooooooooo useful tip man, thanks a lot !!^^
Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...
Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?
This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.
Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???
Vibrate dial pad
Thank you ! This is just what I was looking for
Sorry.Didn't find how to delete message
Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???
Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?
could someone upload it on rapidshare, because i can´t load it, thank you
hi all
my touch hd lost full screen htc volume control(left for system volume and right for ring volume) and it changed to default(old version), can someone tell how to change back, i want full screen
one million thanks
I have seems problem,any idea?I have that problem before put colored volume bar.
Can you post a screen shot for the problem?
I posted screen
vidojajce said:
I have seems problem,any idea?I have that problem before put colored volume bar.
Click to expand...
Click to collapse
This happens to me sometimes, because of an installation of an app or a skin.. I beleive it has something to do with the volume control scripts or somethin'..
If I were you I wouldn't worry so much, as it fixes up itself when you uninstall whatever caused this problem, or install another app or skin that could fix the problem without you knowing..!
Anyhow, attached is the original volume control files; transfer to your device & replace to WINDOWS folder using TotalCommander...
@chanmama
Would this be your case..?
Blessed HD said:
This happens to me sometimes, because of an installation of an app or a skin.. I beleive it has something to do with the volume control scripts or somethin'..
If I were you I wouldn't worry so much, as it fixes up itself when you uninstall whatever caused this problem, or install another app or skin that could fix the problem without you knowing..!
Anyhow, attached is the original volume control files; transfer to your device & replace to WINDOWS folder using TotalCommander...
@chanmama
Would this be your case..?
Click to expand...
Click to collapse
tks so much,
but unwork for me, i replace all files to window, then reboot, no effect....
do you have s2u2 installed? if yes, check if the volume control in s2u2 settings is disabled
regards jan
hausen said:
do you have s2u2 installed? If yes, check if the volume control in s2u2 settings is disabled
regards jan
Click to expand...
Click to collapse
volume control in s2u2 was enable, unwork
chanmama said:
volume control in s2u2 was enable, unwork
Click to expand...
Click to collapse
As I mentioned earlier; this could happen because of an installation of an app or a skin that is not FULLY compatible with the HD, although it works fine.
Try to remember when did this happen so that you'd be able to specify which apps/skins have such effect on your device.
Moreover, you shouldn't worry much about this matter since it solves itself as you install/uninstall applications
chanmama said:
volume control in s2u2 was enable, unwork
Click to expand...
Click to collapse
That was a misunderstanding: I meant you should try to DISABLE that in s2u2 settings...
regards jan
Hello,
I have a similar problem: for some reasons, my volume buttons do not work anymore; if I press them once, I go to the usual volume screen. But if I press them again, it returns to the previous screen and act as "go up/go down".
For example : if I am in the Music tab and press the volume button once, it goes to the volume screen. But if I press it again, instead of increasing/decreasing the volume, it returns to the music tab and go to the next/ previous song.
It is quite annoying, so any help would be greatly appreciated
BTW, I installed Reales Task Bar yesterday, and I noticed the problem after that, so maybe it is linked. I uninstalled Reales Task Bar but nothing changed.
**Edit** In fact it was Resco Contact Manager 0.95 Beta that caused that problem.
thanks!!
had the same problem now solves..
resco contacts beta
similar problem here...
the keys won't work anymore if i press them, i always have to open the title bar and manually go into the volume settings and raise or lower the volume with the keys or with the finger.
outside the volume settings it does absolutly nothing?!
I guess it's Mobile Magic, because it changes the keys' behaviour, but i turned it off already.
can someone help?
Same problem with Pocket Shield
I did get the same problem after I installed (and payed for) PocketShield....
Will try to replace the files (mentioned above) unless someone has a better solution?
ya definitely thats because of app installation that is not fully compatible often i have seen those problems and i started making another folder in my pc and mobile saying fully working and now i dont have that problem and ofcourse one of you mentioned the problem bcoz of topbar ya definately dont believe those topbar thats rediculous thing coz u cant uninstall even if u uninstall its always in ur remove program and that effects u on ur screen rotation aswell.
happened to me yesterday so i just did a hard reset and now its perfectly working again
chanmama said:
hi all
my touch hd lost full screen htc volume control(left for system volume and right for ring volume) and it changed to default(old version), can someone tell how to change back, i want full screen
one million thanks
Click to expand...
Click to collapse
well try this and do it twice ... start/settings/touch flo/ and check the box says "show system status screen when status icons are tapped"
Okay im being an idiot recently, its what happens when i multi task
If this is a stupid quesiton so be it , flail me
but im trying to bind my sleep key to teh s2u2 program so instead of sleep it will activate the s2u2 program
wtf am i doing wrong?!
some guidance please?
and just a heads up this is on teh i8000 samsung omnia 2
Sabelbas said:
Okay im being an idiot recently, its what happens when i multi task
If this is a stupid quesiton so be it , flail me
but im trying to bind my sleep key to teh s2u2 program so instead of sleep it will activate the s2u2 program
wtf am i doing wrong?!
some guidance please?
Click to expand...
Click to collapse
I am not even sure what it is it that you want. You want to start S2U2 when you slide out of the lock?
I think he's trying to use a key to launch the s2u2 lock.
Try AE buttons plus (google is your friend) and use it to launch s2u2. It should be in the list as it exists in your start menu as a shortcut.
Good luck and don't be afraid to call for help in case of problems.
Hi,
Here joined a very small utility to setup a SoftKey (Right and Left). I use it for long years...
Unzip
Put via ActivSync on your windows directory phone
Soft Reset
and go to Parameters system tab, I should see the applet...
Regards,
LooZ
View attachment SoftKeyApplet.zip
I wonder if it is possible to disable the automatic start of S2U2 after every soft reset?
mariconjo said:
I wonder if it is possible to disable the automatic start of S2U2 after every soft reset?
Click to expand...
Click to collapse
delete iLock in your start-up using a registry program.
Then I can't close S2U2. I want it not to start!
You can set the boot-up delay in the advanced settings (if that's what you mean. By default it's 5 sec. but you can increase it to even 60 sec.
Thanks for the answer, but I just don't want S2U2 to start automatic after every soft reset. Every night I back-up my Omnia with SPB back-up so every morning my phone is locked with S2U2 due to the soft reset. I don't like that.
mariconjo said:
Thanks for the answer, but I just don't want S2U2 to start automatic after every soft reset. Every night I back-up my Omnia with SPB back-up so every morning my phone is locked with S2U2 due to the soft reset. I don't like that.
Click to expand...
Click to collapse
It is very simple and someone already told you the solution Using a file explorer, go to \windows\startup and delete ilock.exe. So s2u2 won't run automatically after soft reset. You can start and stop ilock from the programs in start menu.
zalaros said:
It is very simple and someone already told you the solution Using a file explorer, go to \windows\startup and delete ilock.exe. So s2u2 won't run automatically after soft reset. You can start and stop ilock from the programs in start menu.
Click to expand...
Click to collapse
Zalares, thank you very much!! What I did wrong the first time was that I deleted ilock.exe from \windows\startmenu... and that's not going to work.
no ideaaaaaa
omgwiiso said:
no ideaaaaaa
Click to expand...
Click to collapse
no ide??????