Related
I have a qtek 2020 with v1.52 rom. I downloaded the new Italian rom (1.72.04ITA) from www.windowsmobile.it and I tried to upgrade it.
After erasing internal rom the upgrade process stopped with a fault message:
Error 112: ce rom update error
Now the display is dark. I can read “serial” or “USB” on it.
What’s happened?
I tried again 10 times but nothing.
It seems that connection between pc and qtek wasn’t correctly established. This because the little activesync icon (bottom right) is now always gray, never green.
Help me please!
Hm...
When OS is not started, PC ActiveSync cannot connect to your device, i think this is indeed...
But open Windows Task Manager and kill process wcescomm.exe (this is that tray icon of ActiveSync) and try to run update again...
HTH
> open Windows Task Manager and kill process
> wcescomm.exe and try to run update again
I tried but nothing.
I also tried to execute XDAtools but I recieved the following message:
Cannot execute the remote communication program.
Please make sure that USB/Serial cable is properly connected.
What can I do?
Does your device changes the screen from "Serial... blablabla..." to "USB... blablabla..." when you put it into cradle?
If so, what update writes when you try to run it (after putting device into cradle and killing activesync)?
> Does your device changes the screen from
> "Serial... blablabla..." to "USB... blablabla..."
> when you put it into cradle?
Exactly
> If so, what update writes when you try to run it
> (after putting device into cradle and killing ActiveSync)?
I can read following messages:
* Message 1 *
Cheking info on your pocket pc. Please don’t disconnect.
-----------------------------
* Message 2 *
Your pocket pc software is about to be update from:
Device CE image version: (now this is blank, the first time I attempted the upgrade was 1.52.00ITA)
Device CE extended image version: (now is blank, first time was 1.52.93)
Device Radio image version: (now is blank, first time was 1.06.1)
To
CE image version : 1.72.04
Extended image version: 1.72.128
Radio image version: 1.14.00
-----------------------------
* Message 3 *
The current software is being erased
Stage1: erasing ROM. Please wait
(But bar will stay at 0%)
-----------------------------
* Message 4 *
(After 2 minutes)
Error 112: ce rom update error
Any ideas?
Stupid question, but do you have pluged charger to cradle? I assume that so...
On other hand, I searched through this forum and found this links:
http://forum.xda-developers.com/viewtopic.php?t=10333
http://forum.xda-developers.com/viewtopic.php?t=8835
HTH
I tried, but nothing.
Anyway thank you for your reply
Hm... I was solving this issue yesterday and try to download update again (some corruption may come when update is downloaded) and flash it again...
I did it. I downloaded and tried also other international rom version, but nothing to do.
I’m going to call the costumer service ...
This is strange... :evil:
Unhappy, we are so far from each other... I want to help you...
Do you by chance have your cradle plugged into a USB hub? There have been many reports of problems in this configuration.
If so, try it with the QTek cradle plugged directly into the computer.
If not, a call to the service center may well be in order.
> we are so far from each other...
> I want to help you
You are very kind. But I live in Rome ...
> have your cradle plugged into a USB hub?
No, it is plugged directly into pc
Service center seems to be the only chance
:roll:
Me too..
Hi!
Just experienced the exact same thing :-(
I hate it!
I has done it one time before, and then I had to send it in to be repared. I dont know what they do, but I got it back working again.
But now when I saw the new official 1.72 rom, I wanted to give it another try.... but... now its dead again, doing the exact same thing as yours...
any news?
Regards
Peter.
You are very unlucky.
Today I’m going to call service center.
I hope they’ll solve problems quickly.
I’ll tell you what’s goin’ on.
Working!
hey!
I actually got it back to life!!
I took a different PC, connected my qtek and just started the upgraded again, even though the activesync wasnt connected. It started to upgrade, and my Qtek is now back to normal with 1.72!
Try if you can, with af different PC...
Today my service center replyied to my email regarding this, sayning that they couldnt help my, and there was no guarantee since i tryied to upgrade my self :-(
So, good thing i did it my self
I was thinking about it because I had some problems with usb ports on my pc. So this morning I tried the upgrade from another pc and ... YEEEAH.
I make it !!!
Now qtek 2020 works again !!!
Yeah!
Congratulations!
Good thing we have this forum
Experienced any problems with the upgrade yet?
yes.
still problems with bluetooth connection: no signal available from gps reciever. :shock:
problem solved by downloading bluetooth tools from:
http://bluetooth.i-networx.de/index_e.html :idea:
now it works fine.
bye
hi,
i just received my o2 xda 2, i decided to upgrade to 1.60 when i saw 1.72 it's out:
1st quest:
where could i find 1.72?
Does the qtek one works with my xda?
thnx
ciao mario!!come ti va col gps BT e tomtom3?
Hi!
I would definetly not try to do any upgrade as long as the upgrade isnt directly comming from your service center. All the XDA upgrades I tryied on my Qtek didnt work at all...!
Be carefull!
I recently upgraded the rom on my imate pda2k to 1.4 all was fine then during a GPS session the imate hard reset itself.
Since then i cannot connect to any bluetooth devices - i have 2 which used to be detected and worked fine and still do with an old 3870 IPAQ - a Navman GPS reciever and a bluetooth enabled nokia phone.
i have hard reset and rebuilt several times but cannot get the bluetooth detection working.
i have searched lots of forums and have already tried suggestions such as putting phone in flight mode, enabling BT and soft reset, also tried turning off IR
is it possible to downgrade the version of rom back to earlier version ? as that is the only thing i can think of that i have have not tried - and if so - where can i find a copy please
please can anyone help - i am really stuck now
thanks
IMATE Jam
I am using an IMATE Jam phone which also having the same prolem. When I am trying to swith on my Bluetooth it is asking me to swith off the Flight Mode. What is this? How can I Swith off this Flight Mode
Hi all,
I have a strange problem: bluetooth manager works fine after a soft reset. I can my PPC the whole day and it will always start normally (read: the screen that shows BT shortcuts shows up). The problem occurs when I turn off the phone over night (flight mode). The next day I can't get the BT manager to show the shortcuts screen - BT can be switched on and off but neither the BT manager or the BT settings screen will show up (there is no error message!!!). After I do a soft reset everything starts working...
Has anyone come across this kind of a problem in the past? I couldn't find anything using search on this forum...
My device info is (DutchRetail ROM):
ROM: 1.40.00 WWE
Radio: 1.13.00
Ext ROM: 1.40.556 WWE
I have tried uninstalling almost all extra software that I have installed after a hard reset but the issue is still here.
Thanks for all suggestions on what else I can try.
Hi Poga,
Yep, I get exactly the same problem :-(
AndrewB
ROM (i-Mate) 1.40.00 WWE
Radio 1.12.00
ExtROM 1.40.176
Hi Poga,
Yep, I get exactly the same problem :-(
AndrewB
ROM (i-Mate) 1.40.00 WWE
Radio 1.12.00
ExtROM 1.40.176
Do either of you have Goodlink software on your device?
same problem no goodlink
Same problem but no goodlink software
I also get another funny problem where sometimes I go to connect to my bluetooth access point from my phone and it just has the little pie icon saying it's doing something, then it stops and it hasn't connected (the connection icon stays the same) and I can't make any sort of connection. It then does this everytime I try to connect.
I don't know how i fix it, but I combination of many soft resets various flight mode turn ons and fiddling it eventually works. It's very frustrating and it's happened on every software version. Right now i"m running 2.04.00. I have a CDMA from Telecom NZ running radio HA_01_151 right now (but I've tried other radios).
Somebody else had this problem I noticed but nobody replied to his posts.
I've got the same problem I hope someday that someone makes a fix for it. I run the XDA IIs BlueAngel 1.40.00 Asian O2 ROM WWE. =/.
Same problem here - only solution I had was to go into settings/memory and then stop all programs running - then the bluetooth manager appears without the need for a softboot..
Pain in the arse. :!:
poga said:
Hi all,
I have a strange problem: bluetooth manager works fine after a soft reset. I can my PPC the whole day and it will always start normally (read: the screen that shows BT shortcuts shows up). The problem occurs when I turn off the phone over night (flight mode). The next day I can't get the BT manager to show the shortcuts screen - BT can be switched on and off but neither the BT manager or the BT settings screen will show up (there is no error message!!!). After I do a soft reset everything starts working...
Has anyone come across this kind of a problem in the past? I couldn't find anything using search on this forum...
My device info is (DutchRetail ROM):
ROM: 1.40.00 WWE
Radio: 1.13.00
Ext ROM: 1.40.556 WWE
I have tried uninstalling almost all extra software that I have installed after a hard reset but the issue is still here.
Thanks for all suggestions on what else I can try.
Click to expand...
Click to collapse
cw6447 said:
Do either of you have Goodlink software on your device?
Click to expand...
Click to collapse
I do and I have the same problem. I've been suspecting that it may have something to do with that because when I reset and I can start the manager just fine before I start Goodlink, but after I start goodlink it's a pain. Once, I tried to start BT manager then it didnt... i forgot all about it then suddenly some 11 hours later it just popped up by itself. Goodlink had been running continuously.
Any ideas???
I sometimes have the same effect.
What I usually do to resolve it (without soft reset):
- I installed PocketNav (kills programs which run in the background)
- I select 'Close all but Ative' in PocketNav
Then the Bluetooth Manager works again.
Hope it helps.
A
This is due to memory limitation in WM2003SE. When it finds that the memory is not sufficient it wont run Bluetooth Manager or Wifi. I had this problem a lot until i have shifted to WM5 which has more than 100 mb when the device starts. I guess that is why M$ has built WM5 for that reason and also for persisten storage of course.
The "memory limitation" is indirectly the problem. The Goodlink, which is more than three times the memory hog as any other 3rd party app out there, is the direct problem. I could write a college discertation on the amount of bugs in this awful software. And yes, it is good for push email...but at the expense of everything else that is good about these multimedia devices we own. The typical "close-when-you-tap-the-X" software utilities don't shut down Goodlink on my device even though they successfully shut down every other software I own (over 40 titles). So I have to use MemMaid to kill its process. But Goodlink will restore itself in a matter of minutes as it ventures out to the server looking to synch mail, calendar, contacts. If there was ever a reason to bring back public hangings, it would be for the Goodlink windows OS development team.
I don't really see any issues with Goodlink eating my memory. Then again, I've converted from a strictly fun user to a strictly business user so the whole gaming and multimedia thing doesn't quite do it for me anymore.
Steiner,
I tried PocketNav to see if it would truly close GoodApp.exe. Although it does seem to shut the application down, the 6+MB exe still is open in memory. Using MemMaid it shows that it never really closes.
I also didn't have the Goodlink software installed . My solution to the problem was: I installed the Sprite Backup software and set it to automatically restart my PPC @ 6 am after creating a backup. So in a way, this problem was very benifical to me - I now have a fresh backup of all the software every morning and the device reboots every morning without my intervention (no BT errors, no WiFi errors, etc).
poga said:
I also didn't have the Goodlink software installed . My solution to the problem was: I installed the Sprite Backup software and set it to automatically restart my PPC @ 6 am after creating a backup. So in a way, this problem was very benifical to me - I now have a fresh backup of all the software every morning and the device reboots every morning without my intervention (no BT errors, no WiFi errors, etc).
Click to expand...
Click to collapse
Good idea!!! :lol:
Hi all,
I have update my 'old' but still powerful iPaq to Windows Mobile 6.5 following the suggestion of Spiaatie... (http://forum.xda-developers.com/showthread.php?t=519296) GREAT JOB!!!!!!
everything worked fine, easy job the update process and everything seemed to work fine...
I tested WiFi and BT...
Now I have installed a GPS Navigation SW (TomTom 7) in the SD card...
Running the SW no problem... turning on the BT: great Problem - I got the following problem: the bluotooth radio failled to turn ondue to insufficient driver memory. you must perform a normal reset before you can turn ON the Bluetooth radio.
I've tried a soft reset: nothing changed
I've tried a full formatting (hard reset): BT was working and as soon as I have reinstalled the TomTom, same message....
any suggestion???
thanks all
Vit
Solve it!!!
Hi all,
googling the issue I fix it!!!!
I've just renamed 2 files in the windows directory:
BtCoreIf.dll
BtSdkCE30.dll
and the BT works fine!!!!
cheers
Vit
Hello everybody,
I am using ARHD since v9.x (don't remember the exact versin number) and moved to JB as soons as it was released.
Since ARHD v17.0, I experience bluetooth heratic connectivity to my car phone system.
My OneX and my car are paired but it takes more and more time to have them connected.
In v17.0 it took about 3-5mn to connect, this morning, with v18.1, it took about 20mn...
I tryed the following :
upgraded the firmware to 1.39
"superwiped" and re-installed ARDH 18.1 rom
cleared the bluetooth entries in both the phone and the car configs
No improvement.
Is there an issue in the BT module since v17.0 ?
Does anybody else experience the same issue ?
Well in two words : "help, please !"
Thanks in advance.
No one else ?
Come on guys, no one else experiences the same issue ?
I'll try to investigate further by myself:
Check the car BT system with anoter phone
Check the phone with a BT connection to a PC (I don't have another BT headset)
Install another custom ROM, e.g. cyanogenmod
Revert back to the original HTC ROM
Well, several tests later... Still facing the same issue.
If i erase the BT profile from the car audio system and the phone, then re-associate them together, the connexion occurs within 30sec !!!
then shut off the car and switch it on again... Both the car and the HOX are trying the connect for several minutes.
I will try to reset the phone when the new version of ARHD (18.2) will be released.
Checked BT connexion between HOX and a PC and another phone
-> connection : ok
-> stop / start : ok
No pb found on HOX side
Checked car with 2 differrent phones (wiko cink slim and lg gt505)
Car does not find any of them...
Even when I stopt any BT connection from the car interface, the BT system retart the phone search...
I'll have to call VW...
So, there is no bluetooth issue in ARHD 17.0 .. 18.1
Unfortunatelly, I have an issue with my car
Topic is closed