Develop Bugs

Phone problem - neither myself or caller can hear anything

Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?

i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:

Is your BT on? If not turn it on and leave it on.
good luck

Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?

Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?

i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.

matrix70 from version did you upgrade from, do you remember?

same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck

now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....

I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.

I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine

Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.

im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.

im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.

Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik

Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.

there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.

how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...

Need Some Help!!!

Greatings From Beautiful Greece ,
Before One Week I bought my first PPC , a HTC TYTN
I Would like to know how to unlock the gps. Is it possible?
I Can only connect to the Destinator with the bluetooth adaptor and connect to the satelite.
Anyone Know how to crack this? Is it possible?
Is there any new update i can install in order to manage better my ppc.
I Heard WM6. How Can I setup a new Operating System? Will It work or will my PPC Crash and after i will need Service.
Thank u all.
Odysseas.

TYTN does not have a GPS. There is nothing to unlock. (Well there suppose to be a chip but no antenna so its useless).
DO NOT MESS WITH YOUR OS!!!
A) Changing the OS without an official update from your cell company or the manufacturer of the device will void all warranty and you will have to pay for service if anything goes wrong.
B) Changing the OS on TYTN is very complicated and should not be tried unless you searched read several times uderstood and memorized all the steps.
Just enjoy your phone as it is for now because if you try to change ROM too soon you could end up with a very expensive paperweight! (Many people have)

Topic Closed Thank u!!!
topic closed
---------------------------------------------------------
thank u all

USB Sync Problem

Hi all,
my TMO-MDAIIIc stopped syncing over usb cable!
I do not have any clue why!
Last thing i remember i installed the OpenVPN-Client!
I did this before on Windows Mobile 5 without problem.. So i presume it's not caused by OpenVPN!
Nevertheless i wonder if anyone has experienced this as well? I tried to connect the device to several computers without even ActiveSync recognizing it. But loading the battery over USB still works!
I also do not get a "Network Interface" if i connect the cable.
I searched several forums and find out there were similar problems, but unfortunately no solution for me...
It seems not to have something to do with the "Notification deleted" problem..
As i can see several replog.exe notifications. Also the one about RS232 Connections... Is there any other Notification missing maybe?
I also tried to play with the USB-to PC option in the settings menu. No effect.
Im totaly clueless i can sync via bluetooth, and irda, and of course wireless (gprs).
Any help would be much appreciated!
Cheers!
Syn

My phone stopped working the same as yours about 6 months ago. I recently found out that it was because i charge my phone in my car, which can damage the USB Interface Board in the phone. (usually when you have the phone on charge, and then start the car, causes a spike in the current).
As far as i know, the only way to fix it is to send the phone back to the supplier, who will replace the board under warrenty.
Assuming you have the same problem

Hi, thanks for reply!
could be true! I also charge it in the car frequently... I didn't payd a lot attention to if i plug it beofre starting the car or after...
So my last try now seems to be a "hard-reset".
I'll let you know if it fixes the problem.... If not....
I may need to "downgrade" the phone b4 sending it right?
Cheers!
Syn

Synablade said:
Hi, thanks for reply!
could be true! I also charge it in the car frequently... I didn't payd a lot attention to if i plug it beofre starting the car or after...
So my last try now seems to be a "hard-reset".
I'll let you know if it fixes the problem.... If not....
I may need to "downgrade" the phone b4 sending it right?
Cheers!
Syn
Click to expand...
Click to collapse
yeh, its probably a good idea to put the original ROM back on

What's really bugging me is:
Why is it still "loading" the battery after damage to the USB-Circuit??
Anyway.. i did the hardreset, and guess what...
no effect... my problem now is.. if usb stopped working.. how do i flash back to original rom? :->
bluetooth? *shudder*
Cheers!
Syn

hi,
I always clear the option usb to pc.I think this wil solve you problem
settings>connections>usb to pc
Cheers,
zaza

Synablade said:
What's really bugging me is:
Why is it still "loading" the battery after damage to the USB-Circuit??
Anyway.. i did the hardreset, and guess what...
no effect... my problem now is.. if usb stopped working.. how do i flash back to original rom? :->
bluetooth? *shudder*
Cheers!
Syn
Click to expand...
Click to collapse
yeh, same as me i havent been able to flash a cooked ROM to mine at all. You can change the ROM by using the MicroSD, as long as you are USPL unlocked. There is a section in the Wiki about how to do it.
You cant change the ROM using bluetooth, caus half way thru flashing, whats gonna control the bluetooth??!
The Battery still charges caus the battery charging circuit is seperate to the USB control circuit

Are you guys running XP on your comp/laptop? have you turned off your firewalls? i had problems syncing on my laptop with xp, now i use my comp, but i found if i removed firewalls all was ok. if you have tried reflashing, or if you havent flashed any new software if you have tried re-sinstalling active sync, try the above, im sure its somethign simple

patterns said:
Are you guys running XP on your comp/laptop? have you turned off your firewalls? i had problems syncing on my laptop with xp, now i use my comp, but i found if i removed firewalls all was ok. if you have tried reflashing, or if you havent flashed any new software if you have tried re-sinstalling active sync, try the above, im sure its somethign simple
Click to expand...
Click to collapse
I've tried everything... WinXP, WinXPx64, Win2000, Win Vista, active sync V.3-4.5... the only answer is to send the phone back to T-Mobile, they will fix it under warrenty tho, so it aint so bad.

hi thank you all for your replies!
unfortunately i think mugglesquop is right,
the device died from power overflow from car adapter...
funny thing here is: i use a motorola car adapter all the time! no problems.. then i changed to a tmobile provided adapter! And now it seems that tis one is vulnerable to power highs! Great!
You know what ? I love t-mobile for providing "cheap" "crappy" hardware!
actually im downloading the original rom i found and i will try to flash it back via sdcard. Then i will send it in!
Cheers!
Syn

What rom are you using ?
I had the same problem & i was using B&B4.3. It took me a couple of days of trying before i could get an activesync connection. I then flashed O2's mobile 6 Rom & hey presto everythings working again (now trying different rom). Not sure it was the Rom as only a few people seem to have experienced the problem. So it could have just been a coincidence. Also i would assume that the problem should be instant rather than after a few days of having the rom flashed. Have you tryed jiggling the usb cable about in the phone to try & get a connection ?

Synablade said:
hi thank you all for your replies!
unfortunately i think mugglesquop is right,
the device died from power overflow from car adapter...
funny thing here is: i use a motorola car adapter all the time! no problems.. then i changed to a tmobile provided adapter! And now it seems that tis one is vulnerable to power highs! Great!
You know what ? I love t-mobile for providing "cheap" "crappy" hardware!
actually im downloading the original rom i found and i will try to flash it back via sdcard. Then i will send it in!
Cheers!
Syn
Click to expand...
Click to collapse
lol, gotta love T-Mobile... No WM6 update as well
Good luck getting ur MDA sorted!

Daxian T32 Phones

Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.

thepindoctor said:
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
Click to expand...
Click to collapse
I have heard that there is a hack for it, but haven't been able to find it anywhere. It's probably all over the Chinese forums...in Chinese....

daxian
hi folks!
i got an daxian x999 (which is the same as your t32) and i´m desperatly trying to dump the rom, because i want to modify or even replace it!
if u got to know somethings about hacks or tweaks, please tell me about it!
if someone can tweak it, maybe he even can dump the rom
thanx in advance
chuckbert
p.s.
to have wifi in my phone would be quite cool, too

Hello,
i have the x999+ with working wifi.
If it would be possible to read out my rom. could this be helpfull for you?
michael

rom!
sure it would be helpful... if it would be possible!
i´m trying to do this for a couple of days and i desperately need help from some kind of "rom-god"
so all u "rom-gods" reading this: gimme a hand, please!!!

I do have the 8 Gig mini sd card update for it, but nothing for the wifi yet. I dont even know how to get into the rom to enable it. As for the GPS chip it is over in europe from what i heard.

update
@thepindoctor
what kind of update is it?
just a .cab or something to flash the device?

It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.

wifi
where did you get the information about the possible wifi-upgrade from?
i´m still very interested in it...
p.s.
i never experienced these kind of problems, though i keep playing around with my daxian to get the bootloader out! kinda strange...

T32 8 gig cab
thepindoctor said:
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
Click to expand...
Click to collapse
Hi,
Were I can find this 8 gig card cab? In my device with wifi has just up to 2 gig.
Thank you in advance!
BR

SDHC update and WIFI
To enable SDHC, you can just look for it on the forum, it is on here several times...
Am not sure, but don't think that there will be an "update" for wifi...
The daxian x999/t32 doesn't have it, the daxian x999+/t32+ (which I have) does however...
So don't think you should get your hopes on for a "wifi update", if you would have a wifi antenna built-in, don't you think they would try to make it work from the beginning?
The + version has also been released a couple of months ago and if there would be such an update, I think they would've released it then.

is the sdhc hack a standard wm6 update for all phones? can't find a specific T32 one on here

I have the Wifi Hack App
Its a little dificult to do this:
1) get the pocket hack master (trial version)
http://store.handmark.com/p/910/Pocket_Hack_Master_for_Windows_Mobile_Pocket_PC
2) Shut off BLUETOOTH on 13%
3) Download http://www.freewarepocketpc.net/get-wmwifirouter-v0-89.html
WIFI router
4) on T32 (only T32) go to Settings - Connections - GPRS Stup, name it WIFI (on gprs internet)
5) save and restart t32. Run the wifi router and it will find your connection
And your using T32 wifi . thanks Rex909 the ghost hack master
i think i explained it right if i left something out let me know

That doesn't really make any sense. I've never been able to get Pocket Hackmaster to work with my T32. And how would one "shut off BLUETOOTH on 13%"??? And what would Hackmaster and the WiFi router have to do with each other?

any answer to the sdhc update whereabouts?

shambolic said:
any answer to the sdhc update whereabouts?
Click to expand...
Click to collapse
the cab that i use is SDHC.777 and is working, do a search with this name

problem with my daxian x999
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.

Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...

Draque:the_Plaque said:
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Click to expand...
Click to collapse
****, YES !!! S2U2 and S2V,
Tomorrow, I'll send to china. Now the phone doesn't boot. Only shows windows mobile screen (blue). Nothing more
It's good to know which soft we have to avoid.
I didn't use WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator.
Only used S2UD and S2V.
Thanks for your info and share it!

personally i dont really think that s2u2 is responsible but maybe...
On the other Hand i had the following sw installed:
OmapClock - which failed at 204 MHZ
ActiveGCSync - a Google Calender Sync Application
GooSync - also a Google Calender Sync App
opera_wm5_ppc_865 - Browser
osmtracker
PCMKeyboard
Pointui 1.51a
SetVolume
SkypeForPocketPc
many GPS and Geocaching Apps
i also deleted the launcher startup link and the TouchFlo3D App.
btw: did s2u3 always behave right when you rotated the screen?
Good luck for your phone

serious bluetooth issues after hard reset,plz help

First and foremost id like to thank all the contributers for their awesome help in regards to my issue
i recently installed tom tom onto my rhodium and realised that the bluetooth had dissapeared completely,as a noob this totally freaked me out so i uninstalled,deleted off memory card and hard reset my device.
i now havea strange issue in regards to my device, they are as follows:
1) the bluetooth is not being picked up by any devices within the area (i can send files to my laptop and other phone but not vise versa, when i search for my rhodium its not being seen!?)
2)when i now plug my rhodium into my lappy using the usb cable, when i go to "my computer" it doesnt see the unit as an external...im lost to why this has happened?
Anyone else had similar issues and any of you experienced users have any advice to help rectify this?
Thank you in advance
(a very frustrated rhodium user)
graph1uk

Try another hard reset. Did you remove your memory card from the device before proceeding with your last reset?

thanks for the advice,tried more than once with out any luck so called vodafone uk about the issue, would love to complain how bad the service was but cant as they were very helpfull and exchanged the unit the following day.
however now i have a brandnew unit which has exactly the same fault, the bluetooth is working fine apart from being discoverable?
not one to throw my hands up in despair i contacted HTC direct based in milton keynes, from what their tech guy told me its a common fault with this unit due to the bluetooth stach being specificly designed for this device, theyre working on the issue and will update asap.....so now what do i do?
anyone know of any bluetooth cabs i could try and install to rectify my issue.
with that thanks graph1uk