Related
I have upgraded to LVSW Windows Mobile 6 and satisfied with its performance. But the same SMS problem is still here.
When i get SMS and reply it using its REPLY option then following message appears:-
Your SMS cant be sent.
Your call barring settings are enabled.
But when i go to my contacts, select the name and then send him msg, SMS goes very fine without any error.
I did not had this problem with built in ROM at the time of purchase in TYTN. Its quite irritating as i communicate alot on SMS. I know there are alot of genuis people around, so any solution will be appreciated.
Reliance.
reliance said:
I have upgraded to LVSW Windows Mobile 6 and satisfied with its performance. But the same SMS problem is still here.
When i get SMS and reply it using its REPLY option then following message appears:-
Your SMS cant be sent.
Your call barring settings are enabled.
But when i go to my contacts, select the name and then send him msg, SMS goes very fine without any error.
I did not had this problem with built in ROM at the time of purchase in TYTN. Its quite irritating as i communicate alot on SMS. I know there are alot of genuis people around, so any solution will be appreciated.
Reliance.
Click to expand...
Click to collapse
just a warning, your question will not be answered as you created a new thread. you should have posted this in the LVSW ROm thread.
sorry i did it in hurry. i take it to right place.
Hi!
I'm subscribed to weather forecast that comes in 3 text (SMS) messages every evening @ 10 PM.
When I swiched from wizzard to hermes, I noticed, that I got only one or two messages instead of 3 every night. I thought there has to be a problem with the device, so I changed it.
== BUT==
Now I have a brand new Hermes - and with the same problem!!! It just looses SMS messages. Several people have been complaining to me that they sent me SMS which I did not receive.
What would be the problem?
the first hermes ran WM6 black 3.01 with 1.41 radio and the second one runs WM6 black dymond with 1.40 radio. The only common thing is that both devices were treated with Oli's HardSPL 7.
p.s. when I put my SIM card into a nokia, I receive all 3 messages as normal.
PLEASE HELP!!!
I dunno if this will help at all but...
...try going into start>settings>phone>services(tab)
click on 'voice mail and messages' then tap the 'get settings' button.
It should get the SMS and voicemail numbers from the network.
Might help...but its a long shot.
mrvanx said:
I dunno if this will help at all but...
...try going into start>settings>phone>services(tab)
click on 'voice mail and messages' then tap the 'get settings' button.
It should get the SMS and voicemail numbers from the network.
Might help...but its a long shot.
Click to expand...
Click to collapse
That actually helped me in the past. For some odd reason my SMS's would get stuck in the outbox and not send, so upon advice like above, I clicked "get settings", and all was well. It hasn't happened in a long while, but it was solved by doing that.
it actually may be your sim card similar thing happened to me got a new sim card fixed it.
I had a very similar problem with normal ssmes not coming thru and smses being held in the outbox. The problem started when I changed to an AKU3 Rom. The old South African 1.35 Rom worked perfectly but as soon as I changed to their new AKU3 the sms problem started. I had also upgraded my Radio to the 1.41 Rom.
How I solved the problem was I got my sim card replaced (which I found didn't solve the problem). I then only installed the apps I really needed and didn't upgrade the Radio.
For the past 2 weeks I haven't had any problems, so maybe try hard reset your phone, and start by only running it as standard and see what happens, also maybe try downgrade your radio.
Ensure the you have a message centre assigned in the phone settings. If you cannot get it automatically, call your operator and enter it manually.
Hi rebel I have noticed the same problem...but it is regarding the SMS and MMS...so could be some operator incompatibility or sth...will try the"get operator settings" thing...but I think this won`t solve our problem, cause not receiving all SMS/MMS it is a thing...but not receiving just some SMS/MMS is another problem...
Regards,
Primoz
Hello to all!
I tried "get operator settings" and will report if there will be any progress. But I doubt, because if settings were wrong, than I wouldn't receive any text messages. But I can receive SMS, just not all of them.
It just makes me crazy.
@PC78: we're both using same network (Mobitel Slovenia). If you had exactly the same problem, than I guess it has to be some incompatibility between hermes and operator? I will contact them and ask for explanation.
In the meantime, I will flash my hermes to some old ROM with stoneaged Radio (1.03 or something). Let's see what happens ...
Greetings,
Robert
I have the same problem, could it be the HardSPL?
gh0st, where are you from? Till now, only users of Mobitel Slovenia reported this problem.
I don't know if it's hard SPL. But it's possible. Can it be removed from the device? I'm willing to try. But I need some instructions on how to remove it and bring the device back to the "factory" state.
regards,
Robert
...Hard-SPL?...what have the Hard-SPL to do with SMS/MMS?...I think it could be only an OS/Radio ROM problem or operator incompatibility but not Hard-SPL...
Regards,
Primoz
same problem here...
delayed texts and no sms recieved...
i found out that even i have signal on my cel, im out of coverage when contacted.. but this is intermittent
there are times its ok.. then not.. then ok..
this happens only when i upgraded my dopod 838 pro
thats why i ask experts here on other thread how can i roll back the original
setting of my cel.. specially the radio..
im from asia region... can anybody help me too..
i upgraded to 1.40 radio which i think suited only for cingular network or other else...
Hard spl olipro 2.10 etc...
I had problems with SMS wneh using Black 3.0, using LVSW (latest) now and have no problems.
I suggest you try using one of the LVSW roms instead of Black - try Elf's or Sleuth's variants as they are the most complete.
Also, the most popular shipping "new" radio out there is 1.38.00.10. Try that radio as well.
Hello guys,
A bad news, really.
It's confirmed: Hermes has some serious compatibility issues with certain mobile operators (networks).
I contacted a company that imports and repairs HTC devices in Slovenia. Technician told me that they are aware of the problem and are solving this "missing SMS" issue together with carrier (Mobitel) and manufacturer (HTC).
They didn't yet solve it, though.
This technician also told me that this problem is ROM-independent, so it does not matter if I'm using june 2006 stoneaged ROM with 1.03 radio or newest cooked WM6.
Greetings,
Robert
go into start >> settings >>> phone >>>services >>> click on voice mail & text messages and click on get settings
it will show you your settings for text message service center. Make sure there is a "+" sign before the number. for example + 1 (312) 314-9810 >>> this number is for cingular message center anyways "+" sign should solve the problem
cheers
thesame problems with sending sms or replaying and reciving.
even on orginal Era's ROM
Sometimes everything is perfect but when I tap replay, sms stucks in outbox.
Or sometimes when just wanted to write new sms.
Only SR helps.
my operator: Poland - Era gsm
Thanks for the replay Rebel...so my concern was [email protected] incompatibility problems...doooh...
Regards,
Primoz
I have had my hermes for only 1 week on T-mobile uk PAYG. Everthing works cool, but I have had a couple of calls from people why didnt you respond to "x" text message. they just did not ever come through at my end.
Guess this is the price to pay for having everything bar the kitchen sink in your pocket.
I can comfirm that I had this problem on Black Dymond (3.5) with certain type of sms.
with elf 2.1 crackberry all works well.
So it Is rom dependant.
Arnie
p.s radio 1.40
hello there, I have some stuff I'd like to change regarding SMS. I've got a P3300 with official WM6.
I'd prefer to change this through some options (tho I didn't find) or registry edit. If possible to do what I need without installing more (battery draining) applications, would be best, but if there is no other choice, I'll take a look at whatever application u suggest.
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
is there any FAQ of different kind of tweaks that can be done with a P3300 wm6 just through options or registry? if yes, could you please link it, I'd like to take a look at that.
thx for everything
zandadoum said:
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
Click to expand...
Click to collapse
sorry, no idea on this.
zandadoum said:
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
Click to expand...
Click to collapse
There is a tweak for this. Search and you will find it or else, i will try to find it 4 you this weekend.
zandadoum said:
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
Click to expand...
Click to collapse
Yes, this question has been answered be4 too. Search and you will find it or else, i will try to find it 4 you this weekend. I thought its possible...
hopefully you can find that info and give me a hand. i tried the forum search function but as i dont know exactly what i am looking for, my search is too generic and i get loads of results (most about tweaked roms) that don't help me at all.
EDIT: found answer to 3) by myself. SOLUTION: open messages, go into menu->tools->options and there you can setup the different types of message accounts you have. at the bottom is an option to enable or disable the account selector. i just turned that off.
For the SMS sent notification:
HKEY_LOCAL_MACHINE/Software/Microsoft/Inbox/Settings/SMSNoSentMsg and set it to "1".
With the mentioned registry edit, you are not notified if the message fails to send. It just tries it, and puts it in sent items. If it fails it will not be re-send again by WM6.
you can fix the SMS/OUTLOOK/MMS thing in Options in your Messaging program.
ok, thx to that registry edit i get the sms sent popup no more. but i don't get any popup warning if it fails.
i've heard something about a different regedit key, with different numbers like
0 = no warn
1 = all warns
2 = only bla bla bla warn
3 = only ble ble ble warn
etc.
any1 got an idea about this?
also, any way to have the phone re-send failed sms automaticaly when i have signal again?
i am at a point that i would also try some SOFTWARE if needed, tho i prefer if it can be done just by registry.
Not familiar with those options. But why don't you give it a try and report back here.
GL
Anyone else have problems with text messaging?
Scenario: I receive a text message, the notification pops up on screen. I have my phone handy, so i hit the reply button.
The phone takes me to Windows Mobile text messaging. I send my text message reply. If the same person texts me back, it is not registered as being read.
So i exit the screen back to the TouchFlo 3d menu. I have a new text message (that i have already seen and read)
So i go to the windows mobile text system to read it...again.
NOW, lets say i have a full conversation with someone. 30 messages later, I still have 30 unread messages, every time i open the windows mobile text messanger, it removes ONE new message, not all.
So, i never get to use the TouchFlo 3d messenger, which is half decent, and the WM6.1 text messenger is stupid.
Does anyone know of a setting, or a third party text program that will over ride this crap, or am i just hoping this all works out.
Am i really the only one who has text messaging difficulties?
kamitsuna said:
Am i really the only one who has text messaging difficulties?
Click to expand...
Click to collapse
this is a known issue my friend...
download SafeInBoxExtender... search the main forum...
it will let you "mark all messages as read" ..
it will cure your problem right up..
*nods* i have it already, it doesnt exactly "cure" the problem, UGH!
We shouldnt have to come up with stupid fixes for stuff microsoft should already have fixed.
Is 6.5 slated to fix some of this garbage?
I have another problem
i cant use the TF messaging
allot of times it tells me message not sent
and if not there is no delivery report
i found out the there is a TF delivery report i must check 1st
but its not fixed !!!
when i go out of the message it becoms unchecked !!
So at the end i used the Win messaging with no problems there
but i wish i can just click the incoming message and reply right away
hmm how odd, i don't have either of those issues.
Which version of the TP2 are you guys using?
karandras24 said:
hmm how odd, i don't have either of those issues.
Which version of the TP2 are you guys using?
Click to expand...
Click to collapse
U mean u reply on sms from the TF thread mode with no problems and u receive a delivery report ???
without having to use the Win messaging mode ?
why me then?
hope any one can help me
my Rom version is 1.19.415.1
dated 06/12/09
im using the sprint TP2
Another partial fix here...Partial because Ive only using the new dll for a bout a week(not sure of long temr effects) & I cant make a successful backup using sprite backup etc without adding the dll files to the exclude list of files to backup.
im not quite sure i understand what you just said.
i must say this is very annoying , not the message but the situation itself , why the message cannot be sent why? there is reception and all ..
idodekel said:
i must say this is very annoying , not the message but the situation itself , why the message cannot be sent why? there is reception and all ..
Click to expand...
Click to collapse
I've noticed on my phone that if I happen to be sending a message at the same time I'm receiving one, my outgoing message usually fails. I'm not sure why this is though.
i agree , i think there is a bug hidden in this issue..
i have many good things to say on my deviice but there has to be a good reson or solution for this , to bad HTC are not recieving our complains and check this
I had always assumed it was a carrier issue. Disconnecting and reconnecting the radio always has fixed the issue for me.
may i asked how u do that ?
my solution is softreset...
is that happen with the TF messeging ?
or the Win messeging ?
casue it happened with me in the TF thread mode
and i stoped sending from that interface till a solution come up
now i send from our old good Win messege with no problem what so even
itdid happen with in the touch flow mode ,
i will try the old known and good wm mode in order to send message , and i will keep you updated.
For me it has something to do with the numbers saved in the phone. I got them all in +49 (0xxx) 1234567 format. When calling someone the phone automatically ereases the 0 and dials +49xxx1234567 - when sending messages the 0 remains in the number and I get the error. I can erease the 0 by hand and then the message is send. After that i can reply to that person using winmo messaging without ereasing the 0...
Partial solution perhaps
Mad Marc said:
For me it has something to do with the numbers saved in the phone. I got them all in +49 (0xxx) 1234567 format. When calling someone the phone automatically ereases the 0 and dials +49xxx1234567 - when sending messages the 0 remains in the number and I get the error. I can erease the 0 by hand and then the message is send. After that i can reply to that person using winmo messaging without ereasing the 0...
Click to expand...
Click to collapse
Hi Marc.
Don´t know if it´s the same problem but there´s an official fix that sound´s about right here:
http://www.htc.com/europe/SupportDownload.aspx?p_id=250&cat=0&dl_id=625
For some obscure reason the explaining text is in french on that site, whereas everything else is in english.
Be advised however that this fix is dated july 30. 09.
There´s a ROM-upgrade dated August 8. 09. Now i can´t be absolutely sure but if I was employed in HTC maintanance, i´d include old patches in the ROM-upgrade. Your post states your ROM version to be 1.14.111.2 and the new German version is 1.19.407.1 so you might be able to solve the issue with a ROM upgrade.
I haven´t upgraded my self. Even though there´s a Danish one provided as well. I´m waiting for the stock WinMo6,5 rom. Installing bought software, contacts, backup and everything feels like too much trouble when we´re going to have to do the whole shebang all over again in a fortnight or so.
In any case the German rom can be found here:
http://www.htc.com/europe/SupportDownload.aspx?p_id=250&cat=2&dl_id=629
Regards
ELO
samarrai said:
is that happen with the TF messeging ?
or the Win messeging ?
casue it happened with me in the TF thread mode
and i stoped sending from that interface till a solution come up
now i send from our old good Win messege with no problem what so even
Click to expand...
Click to collapse
I've also had this occur on the TP1 and the Titan, where I was using the Windows default app.
Polar67 said:
Don´t know if it´s the same problem but there´s an official fix that sound´s about right here:
Click to expand...
Click to collapse
Thanks Elo, just tried it. Seems to work only on Unbranded TP2. Mine is a T-mobile Vario V, I get an error "Incorrect Device".
I will wait for WiMo6.5 as well, I guess it will be included there. And T-mobile will provide a free update for their MDAs.
what's worse - while that error message is sat in the background, until i click it i cant receive any incoming messages (actually looks like i loose them). it cost me a fortune using it abroad, this bug! what's even worse - the tp2 rom provided by mpd is an older version to what this patch fixes, hence incorrect device. waiting for htc reply
idodekel said:
i must say this is very annoying , not the message but the situation itself , why the message cannot be sent why? there is reception and all ..
Click to expand...
Click to collapse
Do you happen to use PIM backup?
no i am not using ,
i am sure this is a bug, i use now the windows mobile messaging module and its flawless.
HTC YOU HAVE A BUG!!!
(please fix it )