Hello,
sorry about my poor english, i am german.
I tryed a Vodafone VPA III with BlueAngel
http://handhelds.org/moin/moin.cgi/BlueAngel
Thats OK, but my Favorite is a Vodafone VPA compact II
(http://www.vodafoneshop.de/shop/det...99434238619615202888123&Artikel_Daten_ID=3208)
Nice Keyboard, nice wight, ....
Data:
Windows Mobile 5.0
OS 5.1.70 (Build 144061.1.1
Processor: OMAP850-195 MHZ
RAM 44.11 MB
ROM-Version: 1.6.3.1 GER
ROM-Date: 11/1/05
ExtROM-Version: 1.6.3.102
GSM vERSIOn: 01.11.10
OS: 1.6.3.1
IPL: 1.06
SPL 1.06
CPU: OMAP850
Speed: 195 MHZ
LCD: 240x320
Colors: 65535
Data-Bus: 16bit
Flash-Chip: M-Systems G3
Flash-Size: 128 MB
RAM-Size: 64 MB
But if i use the haret.exe i become this error:
ERROR
EXCEPTION reading coprocessor 15 register 0
I tryed diffrent Versions von haret.exe, but no Version works.
My startup.txt
set KERNEL "zImage-2.6.12"
set MTYPE 766
set INITRD "initrd-2.6.12-hh2.gz"
set CMDLINE "root=/dev/ram0 init=/linuxrc ramdisk_size=14336 keepinitrd console=tty0 boot_mmc=y"
bootlinux
Can sombody tell me, what can i do to boot it like the VPA III ?
thanks
bye
dennis
It's not a BlueAngel ... It's probably a wizard. BlueAngels run on Intel XScale, and yours is a TI OMAP. The developers here have not ported linux to the OMAP yet.
thanks !
Related
:? Dear All
Hope this message reaches you'll in good health and best of spirits.
I am new to this forum, so please help me.
After upgrading to WM2005 and after installing Hima DOC Tools v1.0, My O2 Xda II has become slow and my Storage Memory has decreased from 32.00 MB to 7.40 MB. When I install any program and / or put any Data in the Main Memory in place of Storage Card (SD Card), it reduces the Storage Memory, I thought the Program Memory usually reduces instead of Storage Memory.
Please clarify my doubts and if there is any procedure to increase the Storage Memory to 32.00 MB or default of 64 MB, please explain how to do it in simple manner, since I am just an end user, will not understand technical language.
The details of my o2 Xda II after upgrading to WM 2005 is :
VERSION
-------
ROM Version: 1.60b.96WWE
ROM date: 04/22/05
Radio Version: 1.18.00
Protocol Version: 1337.38
HARDWARE
--------
CPU: Intel(R) PXA263
Speed: 400 MHz.
RAM Size: 128 MB
Flash Size: 32 MB
Flash Chip Type: 28F128K3
Data Bus: 32 Bits
Storage Size: 30.53 MB
LCD: 240 x 320 TFT
Colors: 65536
IDENTITY
--------
Model No. PH10B
Platform: Pocket PC
I once again request you to help me.
Best Wishes
Dineshchand Nahar
Hello, the forum! This is my first post, and I'm making it out of desperation. I have a time-sensitive problem, having just bought an O2 Xda IIs in Jakarta; if I need to complain to the shop that sold it to me, I'll have to do so very soon....
It's just that I'm confused over why the box and manual should read 96 MB ROM, when my "Device Information" screen tells me I've got a Flash Size of 32 MB. Please excuse my ignorance, but I'm completely new to this - it's my first ever PDA Phone.
I see that Blue Angel is also said to have 96 MB ROM here:
Code:
http://en.wikipedia.org/wiki/O2_xda
[edited for correction]
My specs are shown here. Please help me understand what the problem is. Thanks so much!
sub_rosa25
HardWare:
CPU : Intel(R) PXA263
Speed : 400 Mhz
RAM Size : 128 MB
Flash Size : 32 MB
Flash Chip : 28F128K3
Data Bus : 32 bits
Storage : 43.26 MB
LCD : 240X320 TFT
Colors : 65536
rom is 96 mb, you forget the extrom which is part of the rom and takes about 16 mb
simple math: extrom + flash + storage = rom
storage should be 48 mb but after installing the crap from extrom the rest is 43 in your case
Thank you for the quick and easy answer. It wasn't adding up for me because I didn't realize that extrom was included in the 96 MB ROM quoted. Cheers!
Good day to all!
I am needing an aid! I it extracts the SPL of X01T (G900) for the address of the memory and the 384 archive has Kbytes! Later it extracts with the program "pdocread" and same it has 768 Kbyes! Analyzing the archive of 768 Kbytes, it if repeats to each 200 bytes! Now I have the SPL the G900 of 384 kbytes and want to transform into 768 Kbyes pra to record in my X01T and to transform into G900!
Exists some program that obtains to make this?
Note:
I discover the PWD to flash TFFS img in X01T is 12345678!
I have sucess changing my rom Japanese 03.23CAI to english 3.07 BAI !
The comand is "pdocwrite part02.dump -u 12345678" or change the part02.dump to your rom name !
Very Thank's for helping me!
Hi,
I purchased one HTC Touch with german language and we need to change or upgrade to French or English language
Many Thanks:
------------------------------------
Touch version : Elfin
Device ID : ELF010050
CID : HTC__102
IPL : 2.20.0002
SPL : 2.20.0000
ROM Version : 2.20.407.1
ExtROM Version : 2.20.407.101
Operator Version: None
AKU Version : 0.4.2
Page Pool : 12 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0300
Part Number : 99HEH043-00
MCC+MNC : Not found
I'm kinda of a newbie to the whole flashing the HTC 8125...I've searched and searched and downloaded a couple of ROMS that I would find pretty cool on my phone but...whats next? I got a Cingular 8125 (G4)...I did the hardSPL..and heres what I got...
Wizard Service Tool v4.2.2
18/02/09 02:08:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: ----------
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ee9df2f2 - 5.00M (0x4fec00)
6ea9d13a - 48.23M (0x303c000)
0fb25f92 - 50.95M (0x32f4000)
0fb25f3e - 2.94M (0x2f0000)
2fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000306901051024050918060635
Key Index: 84
All Done.
I still got WB5 on my phone..and I tried TNT.1933 touchflo..by hooking up my phone with a usb and activesync..but when I ran the RUU it said file error..do I have to upgrade to WB 6.1 first and if so...where do I get it (ive searched wiki and everything I could search here) or am I missing a step? Any help would be great, thanks!