After a wm5 hardreset. I can't format storage/clean registry hives because my mail button is broken. Is there another way to exit and do this?
Related
how to hardreset load the default settings urgent need help
power + record +camera THEN reset .... Try that never reset the xda2
just restart
anyone know how
urgent need help
Read the "Microsoft Windows Mobile Version 5.0 I can share" topic. There is a method to hardreser WM2005.
WM2005 Hard Reset
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
After this you will see 3 options(no backlight).
1 Kit = YES ------------------ change this to NO
2 Register Hive= No ---------should remain NO
3 Storage = No --------------change this to YES
after this press the big round button between the call and call end buttons to SAVE. Device Restart, then wait.
You have successfully hard reset your PPC.
Re: WM2005 Hard Reset
I'll explain this menu.
1. Enables the debugging mode of WM2005. I have not played with that, it needs PlatformBuilder to be installed on PC.
2. Clears the registry hives to their default values. I have not tested that, but it should work like hardreset but will keep all modified files.
3. Format the storage. This would also reset the registry because it is contained on storage. Similar to hardreset in previous OSes.
It is rather difficult to press all these buttons without someone's help.
easy
easy... :roll:
:arrow: put the xdall in the table, insert the stylus in reset sw then make your belly or your stomach or whatever to support/push it,
:arrow: left hand hold the on/off sw and record sw
:arrow: and right hand thumb pressing the camera sw and the same time hold or support the device
:arrow: then push it all and count to ten....
hahahaha...just like you are going to acrobatic position.
But i did that.
I use voice command and have assigned it to the camera button. However, every time I do a soft reset or replace the battery, it will set the buttons back to its default. Is there anyway I can retain the settings?
I found the solution - there is a folder in the device called /Windows/StartUp which contains several links that are executed everytime you reset the machine. One such link is called 'Camera_Detect.lnk"... which re-assigns itself to its default button. I deleted the link and its working perfectly.
Yesterday I installed the following .cab on my wizard:
http://www.pocketpcfreewares.com/en/index.php?soft=1137
When I finished the insallation my qtek was freezed. And it did not function any more....
I really want to do a hard reset but my phone can't connect to active sync anymore....
Does anyone have a solution for this problem???
Thank you in advance.....
If the device wont boot any more, the only thing you can really do is a full reset.
I assume you've already tried a reset?
That is the problem.... my device cant connect to active sync aymore... and I dont know another way to do a full reset...
You should have the clearstorage program on your phone. Run that, and it'll hard reset you. There's a button combination as well to do the same, but I don't have a wizard to tell you it. Check the wiki or use search.
V
- Switch off your device
- Press and hold the Comm Manager and Voice Dial button
- Switch on your device (while holding those 2 buttons)
- Press the Send (green button) key to give it a hard-reset.
Good luck.
i just tried to install a program to change the touchflo cube, touch settings by www.fatattitude.com, but now the 3 tab side is completely blank. is there any way to reinstall the touchflo software? i tried a soft reset and it didn't work. any suggestions?
if nothing else works, a hard-reset will get it back. note,however, that a hard-reset will return the phone to it's original state when you first got it. it will remove everything you loaded to/installed on the phone. perform a hard-reset: while holding down the 'green' and 'red' buttons perform a soft-reset. you'll get a message asking you to press the 'green' send key to verify you want to complete the hard-reset. good luck
Don't hard reset just yet.
gammarho55 said:
i just tried to install a program to change the touchflo cube, touch settings by www.fatattitude.com, but now the 3 tab side is completely blank. is there any way to reinstall the touchflo software? i tried a soft reset and it didn't work. any suggestions?
Click to expand...
Click to collapse
use a registry editor and make sure you have values for icon path in the folder HKEY_LOCAL_MACHINE>Software>HTC>Biotouch>MediaHubMini>App1_1 - App1_3
Musicman247 said:
use a registry editor and make sure you have values for icon path in the folder HKEY_LOCAL_MACHINE>Software>HTC>Biotouch>MediaHubMini>App1_1 - App1_3
Click to expand...
Click to collapse
when i use the registry editor, there are values there... but when i talked to sprint they said that there should be 6 different values in the HKEY_LOCAL_MACHINE>Software>HTC>Biotouch>MediaHubM ini folder... i only have 4? i have these values- app1_1,app1_2,app1_3 and media type. what am i missing? is there any way to get those missing values back?
Hello.
I'm trying to give my BA a hard reset.
Getting in the debuggers screen is no problem but leave it is a problem!
When i set the options right i have to push the mail button to leave the menu but nothing happened when i push this button.
How can i leave this menu and apply the hard reset ?
So for now i can't do anything with my phone because i have to give it a hard reset after upgrade to WM6.1.
Thanks.
Sorry this isn't a solution,but I can't hard reset with POWER+RESET,it just resets normally,but leaves all the rubbish on I'm trying to get rid of,so I would really like an alternative reset method.Help me too!
Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!
pixie67 said:
Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!
Click to expand...
Click to collapse
my email botton is n't work tooooo
toooo bad!!!!!