Trying to upgrade to TTN5.21 I get the following error:
Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
Anyone have any ideas how I can overcome this?
Thanks.
are you running the cabs directly on your device?
No, I don't have the cab. I'm running the upgrade .exe that I downloaded from htcclub.
What version tomtom have you managed to get running if any.
I had TTN5 program installed on my uni. To upgrade it I just swaped the tomtom.exe file from my uni for a tomtom.exe that was version 5.21.
Related
First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Did like u said.
Still country id error
works now
thanks
my device t-mobile mda pro jasjar bootloader nope
rsteel1 said:
First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Click to expand...
Click to collapse
this method how?my jasjar can open normal ?
help me
error 101 problem
error 150 problem
MaUpgradeUt_noID trying in my jasjar error problem 150 .whats saying ? problm where? usb dont recognize xp .what must ı do?
please help me im using Vista and cant get connection with my imate to my pc... and what is a radio update if you can help me add my msn!
i dont want to update anymore i just want to get my wm5!
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=FlashVista
Hope it helps,
Okay,
I installed WM5 with no problem, but as a lot of my aps do not work on it, I am now trying to go back to Window 2003.
I have done all the needed stuff as told in the "How to Downgrade a WM5 Rom' (http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5), but when I get at step 7, and run the 'MaUpgradeUt_noID.exe' (downloaded from the howto site) I get the following error:
Error 150: Rom Upgrade utility error
This ROM Upgrade Utility does not design for your device.
Please get proper ROM Upgrade Utility and try again!
Click to expand...
Click to collapse
(the 'MaUpgradeUt 'Device Software Update Utility - R1000 D1001' does also NOT show any info about the Device CE image version)
The ROM that I am trying to use is the same version as I was using before the WM5 update!
Anyone here who can help me with this error?
Nevermind... After rebooting the main pc, I got it to work.
I've got a problem. Trying to update my new rom's Cyberon Voice Speed Dial v1.1 to Version 1.2 and get the following error: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions". I already did research on the net about changing registry and using unlocker, scpb.cab, but non of that seems to work!!!
Anybody else had this problem?
I too have just had this problem trying to install the bluetooth keyboard drivers on my Qtek 8500 Smartphone.
Anyone know what to do.
i've got same message
after hardreset and reinstalling all my software i've got the same problem.
after going to settings->system->Remove Programs i found nothing in the list of available software for uninstall . i supose the database was corrupted .
I got this error when I was trying to install a program that was already running in the background.
I had to close it with taskmanager first.
Hi friends.. I downloaded the Tom Commmanger8 from the forums but have problems installing the cab file. When I install the cab file, it fails saying -
"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions. "
I am running the installation in normal working mode.. when the phone is started up.
Is there a separate admin mode in which I can install the cab file ??
Please help. My comm manager right now shows just one button.
Thanks.
maybe your existing comm manager is running when you try to install the new one? you can see running programs in settings/system/memory/running programs.
or you can soft reset your device and then try to install before you do anything else.
Killing Comm manager worked. It installed fine without any problems or complaints.. I now have the comm manager working fine.
But I wonder how the error it showed me and the actual problem are related..
when a program is running it "locks" some files. when you try to install a new version you try to overwrite those locked files. and you dont have the permission for this (that's why they are locked). you end the running program, and the lock is gone and you can delete/overwrite/change those files.
of course it would be possible to make a better error message like "this file is used by a running process (process_name). please end this process before trying again". but well, it's never done.
the message you got was actually very true and it allowed me to find the reason with my first guess
my solution
I had the same problem, when I tred to install it to device. But when I installe dot StorageCard, it was succesfull withou any problem. And it works,so...
The important point is here to install "8 Comm man" directly after sw-reset!!!
Then the installation works!! I tested it several times.
Hi All,
I am using WM 6.1 and 6.5 devices. I have a software that is already installed on the phone that needs to be upgraded to a new version.
The old software and the new one have same names but the version number of the new one is 1 higher than the old one (This is in _setup.xml of the CAB file).
I have a need that when i upgrade, the old one must be uninstalled. Hence, in Install_Init(), i am using the Uninstall CSP to uninstall the old one.
DMProcessConfigXML() returns SUCCESS and all the traces of the software are removed. But when the control reaches Install_Exit(), one of the params cFailedDirs returns 2. This confirms tht installation failed somewhere and i do get a message saying "Installation was unsuccessful". No files get copied to the respective folders.
Any suggestions or ideas on why this happens and on what scenario?
Thanks in advance
ACS
Now I have the same problem. Did you manage to find the reason?