Develop Bugs

[Help] White-Screen after 3-26 LVSW firmware flash

Sorry to open a new thread, but I want to ask is there any method to fix this problem apart from using Mitty?
I tried flashing LVSW 3-26 firmware using SPL 1.06 or the 1.1x, both gave me the end results of white screen.
I am newbie to Mitty and worry of bricking my device with Mitty.
Can anyone suggest what I could do to cast the white screen away?
Desperately in need of help.
Thanks

I see by the sorry for a new thread you have read
http://forum.xda-developers.com/showthread.php?t=299644
I am with you. Right now I would go to a different version. The previous LSVW or another build. I am trying the mtty thing but I am running vista and cannot get NBHextract to work.
If you do not want to risk it maybe holding off a day and checking back for an update. These guys are fast. Also like I said go to a different version. I flashed the revious LSVW os only and it worked 3 times in a row perfect

When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?

people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option

jasjamming said:
people
for black 1.3 i will release two versions
one with SPL and OS (with RUU 3.6)
and
one with only OS using standard RUU (assuming you already have HardSPL)
this will give u an option
Click to expand...
Click to collapse
Hell yes. Makes the guide clearer to make (i will mention the value of embedded HardSPL and radio though )

mrvanx said:
When you say white screen what do you mean?? You get a white screen and the device doesnt boot?? or the device has a white today screen?
Click to expand...
Click to collapse
The White Screen for me is i can see the HTC Flash screen, but the Windows Mobile screen becomes white without me even seeing it and the Today screen is also white also.

Also, i was wondering if using Hard-SPL might help?
Thanks

nope i am using hard spl and tried it still white screen

Me too....
I also got the white screen of death. lol.
i used the version that was posed on the main page. After the update and initial boot the white screen comes on.
I was able to bypass this after several resets. Then it will start the customisation process. After which it will restart and go to a white today screen with no icons. I do have the task bars at top and bottom but no dialer.
My fix. I went and dl RUU_HER_6.20.100.0_0.00.00.00_XDA_WWE_XBOW_Custom. I installed it and works like it did before.
I will wait till there is a fix for this...
BTW I have a cingular 8525

I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!

After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks

HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Think this should help, I did cut the quote down a bit.
mxlaser said:
After hours and sleepless night, and so many flashes i think the NAND in my dopod was hot enough to fry a breaky for me, i've come to the comclusion, i have 100%, no issue success with all ROMS, using 1.01MFG and MTTY flashing each part seperatly. Not one time has a white screen appeared, with ANY rom, and i've tested all the current WM6 roms.
I d/l'd and tried the latest LVSW rom (26/3) and have exactly the same issue when using the packaged RUU to install it. However, when i use MTTY, its perfect every time.
I would suggest the following steps
1. Load into the bootloader mode (HOLD POWER/OK buttons and press soft reset)
2. Flash SPL-1.01MFG onto your device (Read wiki info and file links here)
3. Once flashed, reboot and do step one again to get back into boot mode. You should now see your boot as 1.01MFG
4. Use NBHextract to extract 06_OS.nb file from RUU_signed.nbh file found in downloaded rom package.
5. Load up MTTY, follow steps in the wiki for the 1.01MFG on how to flash OS.nb (OS.nb is the 06_OS.nb file renamed to make it easier)
6. Once flash is complete, the latest rom is installed and you won't have a white screen
7. Now flash Hard SPL v4 onto your devic for safety reasons.
And this fix is EASY to do, 100% works every time.
Click to expand...
Click to collapse
It worked 100% for me first time.

Just for the record I used ROMbaker to get the 06_os.nb then just rename it to os.nb.
Also if you are not sure and feel nervous about bricking it, then just wait for a proper fix.
Finally I got the white screen a few times and everytime I flashed the previous LSVW os only the device worked perfect. From my reading Olipro may have found the problem haveing to do with bad blocks. Nothing major but I believe they are working on it currently.

If you follow these directions and install 1.01MFG, you can BRICK YOUR DEVICE with ANY mistake!
We're not talking about a brick that can be fixed either. You precious phone will become a paper-weight forever more! Really.
I DON'T CARE WHAT THE N00BS ON HERE SAY; FLASHING 1.01MFG IS **NOT** A RECOMMENDED WAY TO FIX THIS PROBLEM! DO NOT INSTALL 1.01MFG UNLESS YOU ARE OK WITH THE CHANCE THAT YOUR PHONE WILL BE BROKEN FOREVER!!

bubu23 said:
I WANT TO OFER YOU GUYS SOMTHING
those of you who got white screen do you have language on boot?
i mean do you have diffrent language pack that need to be boot when you make hard reset?
cause i notice that when my language pack boot with new rom igot
white screen the language pack stuck it
then i remove my language pack from booting then its ok!!
Click to expand...
Click to collapse
No, I have never installed any language packs on my phone. I use good ol' english.

HKFreak said:
After 1 whole day 24 hours non-stop fidgetting with my device, still NO LUCK...
Flashed it so many times, but still white screen.
Anyone can help me out?
Thanks
Click to expand...
Click to collapse
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.

mzahiri said:
Just go back to a previous version of WM6.
It only takes several minutes to put back XDA- Live.
Click to expand...
Click to collapse
I tried going back to WM5 firmware.
Flashing the firmware is a success but I still got the white-screen-of-death.
Any other options?
Thanks

SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's

Olipro said:
SPL-1.35.Olipro will be released shortly; this should address the issue of the whitescreen error, all those having problems under 1.30 should no longer encounter it if they were able to flash fine with old SPL's
Click to expand...
Click to collapse
Go Oli Go!

Question ?
Hi All,
Sorry N00b alert at this .. but very IT literate
Just a quick question off the cuff, what was the last(est) version (can you provide a link) that i can flash to now .. (not mucking around seperating stuff etc) that wont give me the white screen issue.
I am currently sitting on LSVW 25/3 1.38.10 radio and 1.13oli
Thanx test

Dude! this is a serious problem! Someone to get what it is?

Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??

Did you updated with the official Rom?
Try to flash it again.
Or just try it out a cooked WM6.1 ROM. I recomend Artemis touch Vanilla 4.02.
Cheers

You tried a hard-reset?

babar_almighty said:
Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??
Click to expand...
Click to collapse
did u run a uspl first?

jahrami said:
did u run a uspl first?
Click to expand...
Click to collapse
If he upgraded it, then he didn't need it or it was the original WM6 ROM.
The problem was after upgrade!
Flash it again or do a hard reset!
Cheers

Thanks for the help. Yeah I installed the touch Vanilla 4.02 cooked WM6.1 ROM. And I believe the uspl was in the file. As far as I remember I ran it but had no feedback whether it worked or no...
Would a hard reset get the bad boy back to wm5 or reboot with wm6.1?

I *should* reset/default to factory settings for whatever ROM was last successfully flashed to the device. You will lose any installed programs/data so so a PIM backup/ActiveSync before hand if required.

Problem restoring original SPL

Hi,
I bought a diamond a few days ago, and the touch screen recently stopped working. Before it's death, I flashed it with HardSPL 1.40 Olinex, but kept the rom and the radio stock. The problem now is that I would like to send it in for warranty to repair the screen, and I can't revert it back to the original SPL. I've read several threads about how to change it back to OEM specs, but all of them have resulted in the bootloader still displaying HardSPL 1.40Olinex.
Since my touch screen is broken and I recently performed a hard reset to try to fix the screen, I can't get past the align screen, so i've attempted all my upgrades from the bootloader screen(the screen with 4 colors is bootloader screen i think?). I've tried several SPL's from a thread which i beleive where 1.24 original, 1.37 original, 1.93Olinex, all of them still resulting in 1.40Olinex displaying on the bootloader. I also tried installing an official ROM, but that did nothing. I'm desperate for any help or advice so I can get this phone fixed and start enjoying it.
Thank you

Try make connection via AS ( not bootloader ) and shipped rom with not patched custom_ruu

Did you read this single post by cmonex?
HERE

kvm55 said:
Try make connection via AS ( not bootloader ) and shipped rom with not patched custom_ruu
Click to expand...
Click to collapse
I'll try that. I think i've tried it before, where I could make a connection but was not able to update due to me being stuck on the align screen? I'll give it another go.
R3PUBL1K said:
Did you read this single post by cmonex?
HERE
Click to expand...
Click to collapse
Yes I have thanks. That was where I tried using the RUU-SSPL-withoutNBH.zip along with the 1.37 from the first attachment, which still ended up as 1.40OliNex. I'll give it another go from the active sync rather than bootloader.
Thanks guys

Ok so I tried from AS, here's what i got:
Using CMONEX's post, with all the roms and the custom ruu I was able to detect the phone version and press update, but before it starts updating it gets an error [202], connection.
Using a shipped ruu with the 1.37 from CMONEX's post as well as the shipped nbh, the device loaded into bootloader and updated, but still displayed 1.40OliNex. It was able to install from AS though.
I really have no clue what's going on. Any suggestions?
EDIT:
I was able to magically get the touch screen to work to get past the align screen after updating to a different rom, and I was able to update it normally following CMONEX's post.
Thanks for your help guys.

Great News
Glad you got it sorted

Diamond Shuts Down By Itself

hey, I'm only 1.40 Olinex unsigned;
when i first boot up I have this:
R 52.2.25.12h
G 1.00.25.05
D 1.93.0.0.0
My phone shuts down by itself, after i see the HTC logo and i hear the shut down sound.
why is that happening, is it software or hardware?
PS: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
I am flashing with this ROM, and with some other ROMs it is not even booting up

try this mate
try running mtty then reflash your rom, mtty formats your nand chip and repairs any erroes read THE DEFFINATIVE MTTY THREAD all explained there got to be worth a try hope this helps

trying this now will report on results thank you mate

still having problems, now phone wont boot up at all
i think i can make it boot
(I got USB error after i pressed <- and Vol Down to flash ROM )
is there a problem in my SPL? is my phone bricked?

i can boot into WinMo after i have left the phone for a few hours
but now 5-20 minutes after booting (depending on each time), suddenly i see the HTC logo, and here the shut down beep
any help ?

could it be a bad battery issue?
because when i turn it on i see an exclamation mark next to the battery icon in the bar on top
any suggestions? plzplzplz !!

MTTY Thread
Reflash your phone doing EXACTLY what it says in that thread and you should be good to go.

mzaouar said:
could it be a bad battery issue?
because when i turn it on i see an exclamation mark next to the battery icon in the bar on top
any suggestions? plzplzplz !!
Click to expand...
Click to collapse
Buy another battery, It looks like battery problem.
Good luck

now the battery looks like it's working fine, i've flashed a new radio ROM, but it's getting turned off again :S
should i upgrade to the 1.93 HSPL? because i have a 1.93 ROM
can the problem be from the radio?

Same thing here,
Been flashing the diamond to the bone.
After flashing the (22 jul) verion of the NRG warhawk rom
I have been experiencing some glitches.
As it was my first step from wm 6.1 to 6.5 and I dont want to go back.
The errors ive experienced are not related to rom issues.
Because i got em almost with every rom.
- random restarts
- loss of contacts
- no responding of the device
And ive been reading about the MTTY sollution I go and try that one.

Enonoid, so you didnt find a soltuion to your problem?
and if not, what do you suspect the culprit is?

Been flashing the diamond to the bone.
After flashing the (22 jul) verion of the NRG warhawk rom
I have been experiencing some glitches.
As it was my first step from wm 6.1 to 6.5 and I dont want to go back.
The errors ive experienced are not related to rom issues.
Because i got em almost with every rom.
- random restarts
- loss of contacts
- no responding of the device
And ive been reading about the MTTY sollution I go and try that one.
Reply With Quote
the problem isn't rom related running MTTY formats the chip where the rom resides its like reloading windows on your computer when you know there are bad sectors on your hard drive. it just wont happen follow the THE DEFINATIVE MTTY THREAD and honestly all should be fine it sounds quite tricky at first, but I use mtty everytime i reflash now saves whishing you'd done it once you've reinstalled everything and believe me its so easy if you just follow the guide.

Tried to flash radio 4.49.25.91, and now phone won't work!!!

Got my tilt 2 all of yesterday. Had been using a fuze for a year and a half almost. Slapped the hardspl on after downloading the cab needed to get it into spl mode and flashed nrg's newest rom over sd card. All went well.
Tried to flash a new radio, 4.49.25.91. I was a little rusty on this part. I haven't flashed radio's in over 5 months or so. I renamed the file to RHODIMG.nbh and put it on the sd card i use to flash then initiated the flash.
Took all of 15 seconds, the phone restarted and went to the tri color screen but had funky text on top of the normal text saying something is wrong. I rebooted the phone and it went to that screen over and over without me putting it into tricolor. Now beginning to worry i reflashed nrg's rom over it and it seemed to go ok, however now when the phone gets to the AT&T screen it doesn't do anything for 30 second then restarts itself.
I've Tried Hard reseting, Reflashing a new rom, taking out the sd card, flashing over cable, soft reseting, and everything else i can think of.
I JUST thought to flash a different radio and hopefully that does something as i am Stumped and ONLY JUST BOUGHT THE PHONE YESTEREDAY.
Fuze lasted a year and a half, Tilt 2 lasted less than 12 hours.
Please, if you see my error tell me what i am doing wrong !!!!! I want my phone back !

Wow, i figured as a last ditch effort i would flash a new radio over cable and guess what problem solved :]

Thread Closed