Related
Hello all,
I've recently installed Pug's modified ROM for Alpine (EXT 1.11.162, Camera fixed, O2 stuff stripped, Radio 1.04).
I was very happy with it happy until today, when I wanted to re-install TomTom and of course pair the BT GPS. Alas, the BlueTooth stack (Broadcom 1.0.0.3900) does not allow one to create a Serial Port Profile connection with a BT device.
Before that, I'd used the original O2 ROM and a Qtek 2020i ROM, both had SPP. I even think the Qtek ROM had a MS stack but I'm not sure.
Question is : is it possible to add *just* the SPP profile ?
I'm "downgrading" to O2's original 1.11.169 ROM - 1.00 Radio in the meantime. Apart from that, how to solve this ?
I've tried using the 1.6.0600 CAB (under /BlueAngel/CABS in the FTP) but I must have done it wrong, for it totally screwed up my device and I had to hard reset. Too bad there aren't any BT upgrade instructions with it
How about going for a Microsoft BT stack ? Is that even possible ?
Pug, don't take me wrong : you've done an excellent job, and I'm sure this isn't your fault
Cheers !
Mr_Smoke
SPP service not detected with BT GPS
Right, I'm narrowing it down.
I've just installed a Qtek 1.11.02FRE/Radio1.02.00 => it works.
I wrongly assumed that the SPP profile should appear when one wishes to create a new BT connection. In fact, what I did with the FRE ROM is : explore BT device, and when it finds my BT GPS, it checks the services it supports, and finds SPP alright.
The cooked .162 ROM didn't do that, and I have no clue why.
I'll try another couple of ROMs and see what comes out of it. My poor XDA IIi has had about 10 ROM uploads today
Will keep you posted...
False alarm
Guess what ... It works with pug's ROM.
No idea what didn't work out the first time.
Sorry for the noise
Cheers !
I upgraded to the Qtek rom without any hassle at all (over the top of the i-Mate 1.30.82 latest offering with v0.60 bootloader) and find that it now pairs fine with my bluetake iPhono BT420EX and now offers "Wireless stereo" service in addition to "Hands Free"... but it doesn't work!
HELP - I feel I've come so close, but must be doing something wrong...
If I enable A2DP output by long-click on the iPHONO PLUS and selecting "Set as wireless stereo" (is there an easier way to initiate this?) I hear sounds from all the events, but 'stuttered'. Playback sound via TCPMP or Media Player and it is slow and stuttered. It is as if something has grabbed all the CPU and causing everything to respons slowly. I've got things like PocketBreeze installed but thats about all! Nothing is shoing on the running taks.
On the Hands free side, it has never worked. The phone ignores the headset (and did so on the previous iMate release). The JasJar works fine with my SE HBH600, and the IPhono works fine with my Wife's Samsung D500 so I don't understand what is going wrong here.
Has anyone else come across such problems, or can suggest where I can look for answers.
I have tried a cold reboot to clear any installed progams and it still does the above.
Any help would be really appreciated
Cheers, BossHogg.
RE
There's a 'A2DP Lag' patch somewhere on this board. Do a search, install and see whether it solves your problem
It might be an issue with headset compatibility. I have a Motorola HT820 and I don't experience any stuttering or loss of sound unless I am too far from my Universal.
Can someone do me a HUGE favor? I'm trying to get the X-Scale AKU2 AD2P files for the Treo 700w. From my quick reading of the rom decrypting threads, I need a HTC Uni device to compare the "merged" data from the update + original rom...which I only have a Treo 700w.
I need the following files: Avrcp_MPplugin.dll, bta2dp.dll, sbc.dll
The theory I'm testing is by using the Intel X-Scale compiled files instead of the OMAP compiled files (it appears the file sizes are different on each platform), the Treo 700w will be able to play files without skipping. A poster on pdaphonehome.com suggested this discrepancy.
FYI - I have already tried the AD2P lag patch thread priority patch to no avail.
John
PS Crossposted from Operation A2DP, please reply to:
http://forum.xda-developers.com/viewtopic.php?t=43992&start=150
Re: A2DP "Wireless Stereo" Stuttering on new QTEK
BossHogg said:
I upgraded to the Qtek rom without any hassle at all (over the top of the i-Mate 1.30.82 latest offering with v0.60 bootloader) and find that it now pairs fine with my bluetake iPhono BT420EX and now offers "Wireless stereo" service in addition to "Hands Free"... but it doesn't work!
HELP - I feel I've come so close, but must be doing something wrong...
If I enable A2DP output by long-click on the iPHONO PLUS and selecting "Set as wireless stereo" (is there an easier way to initiate this?) I hear sounds from all the events, but 'stuttered'. Playback sound via TCPMP or Media Player and it is slow and stuttered. It is as if something has grabbed all the CPU and causing everything to respons slowly. I've got things like PocketBreeze installed but thats about all! Nothing is shoing on the running taks.
On the Hands free side, it has never worked. The phone ignores the headset (and did so on the previous iMate release). The JasJar works fine with my SE HBH600, and the IPhono works fine with my Wife's Samsung D500 so I don't understand what is going wrong here.
Has anyone else come across such problems, or can suggest where I can look for answers.
I have tried a cold reboot to clear any installed progams and it still does the above.
Any help would be really appreciated
Cheers, BossHogg.
Click to expand...
Click to collapse
Qtek Rom is one of the worst rom that i have used till now. A2DP is fancy feature even though i have applied the A2DP patch it was good for some time. After reset of my DOPOD 900 it never worked. I suggest use the recent DOPOD 900 1.30.111 on Uploads folder i can tell you it is one of the best roms that is used from stability point of view. Do not use Radio 1.11 as a.06 is the best. Cheers
RE
taurus_bull2005,
Quote
"Qtek Rom is one of the worst rom that i have used till now. A2DP is fancy feature even though i have applied the A2DP patch it was good for some time. After reset of my DOPOD 900 it never worked"
It is NOT a fancy feature and, also, because you're not using a QTEK 9000
FYI, I'm using the QTEK 9000 + the latest ROM update + the A2DP lag patch with my iPHONO mini 450Rx and everything works fine
Re: A2DP "Wireless Stereo" Stuttering on new QTEK
taurus_bull2005 said:
Qtek Rom is one of the worst rom that i have used till now. A2DP is fancy feature even though i have applied the A2DP patch it was good for some time. After reset of my DOPOD 900 it never worked. I suggest use the recent DOPOD 900 1.30.111 on Uploads folder i can tell you it is one of the best roms that is used from stability point of view. Do not use Radio 1.11 as a.06 is the best. Cheers
Click to expand...
Click to collapse
I don't know what version of the QTEK ROM are you referring. But I am using the QTEK ROM version 1.30.77 WWE with A2DP and AKU2 and I have not encountered any stability issues. Plus I never had problems with A2DP even without the patch. Works great on my Motorola HT820.
Spread the love to the Treo 700w users...we need x-scale a2dp DLLs, not the TI OMAP compiled ones for the torndado.
Re: RE
FOSA said:
taurus_bull2005,
Quote
"Qtek Rom is one of the worst rom that i have used till now. A2DP is fancy feature even though i have applied the A2DP patch it was good for some time. After reset of my DOPOD 900 it never worked"
It is NOT a fancy feature and, also, because you're not using a QTEK 9000
FYI, I'm using the QTEK 9000 + the latest ROM update + the A2DP lag patch with my iPHONO mini 450Rx and everything works fine
Click to expand...
Click to collapse
I used the following version.
ROM version: 1.30.77 WWE QTEK
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: 1.30.176 WWE QTEK
I had mutliple freezes , all application where the same as the ones that i have been happily using on IMATE roms. Can u guide me on the same Cheers
RE
taurus_bull2005
QTEK 9000 ROM update has only one version (the one you're showing) unless somebody changes the EXTROM or upgrade/downgrade the radio.
One thing to note. If you're not using a QTEK 9000 but another Universal variant like JJ/O2 EXEC/Dopod 900 etc things may not work out ideally since the update is customized to QTEK 9000.
If if works, then its a bonus. Otherwise you just have to accept some hiccups in the use of other maker's ROM. This also applies to say using Dopod 900 ROM on my QTEK 9000 or JJ ROM on Dopod 900 etc
I suspect the QTEK ROM don't work well on your machine and its affecting the A2DP and probably giving you those mentioned problems.
This you can test out by hard resetting your device and test the default programs to see whether the mentioned problems exist. Then test the A2DP WITHOUT other programs installed. If it doesn't work then there's a compatibility issue between the QTEK ROM and your machine. If it works fine then it must be some programs you installed thats causing the problem. Forget about the previous 'work fine' applications with your iMate ROM
RE
taurus_bull2005
Just another thought. Could it be your ROM is corrupted?
Can you re-download and re-flash again?
:roll:
Hello
I have a Seat Leon with preinstalled bluetooth in-car.
I used to have dutty v1 installed on my hermes and everything was great!
When I installed Black 2.5 then I was able to pair the phone with the car but after a minute the connection is dropped.
same problem happens with dutty v2 and the newest lvsw
you know what is wrong with the new version? newest bluetooth?
any ideas?
i was going to start o similar topic... but i've seen yours... the reason... happy with wm6 and the car kit
so.. i have o parrot 3400LS-GPS car kit... and when i conected the phone to it for the first time it showed the signal strength and battery state... with wm5 i had nothing.... and the coolest thing is that i have also carrier's name... at first it was eandomly shown... but i think i figured it out... if it is on 3g it does not display the carrier's name... but on gsm it does... BUT if i disable the longnameprefix in regedit it also shows the carrier on 3g.. but on this i still got to test....
anyway no BT drops...
spv m3100
radio 1.41.
hardspl 2.10 oli
dutty v2 premium
Same on Audi A6, Black 2.5 (and latest LVSW) drop BT connection. Sucks.
i guess microsoft broke some compatability with this os build in a few weeks there might be a new os build....heh
Same issue here
working with an older version of LSVW (can't recall which one) and a 2006 Audi S4 -- pairs fine, shows signal strenght and other details not shown with WM 5.0, but drops and reconnects randomly. Very irritating. I don't use bluetooth anymore in my car -- a tremendous shame.
dutty said:
i guess microsoft broke some compatability with this os build in a few weeks there might be a new os build....heh
Click to expand...
Click to collapse
dutty do u think that if I downgrade to v1 of your rom the problem will be fixed?
MegaHz said:
Hello
I have a Seat Leon with preinstalled bluetooth in-car.
I used to have dutty v1 installed on my hermes and everything was great!
When I installed Black 2.5 then I was able to pair the phone with the car but after a minute the connection is dropped.
same problem happens with dutty v2 and the newest lvsw
you know what is wrong with the new version? newest bluetooth?
Click to expand...
Click to collapse
Hi, I don't know if this will solve your problem but here goes anyway. When I first got my phone (Orange SPV M3100), I could not connect to installed BT system in my Audi A4. I understand from what I have read that this is due to a slight difference in BT specification used by WM to that used by mobile phone manufactures. I had similar problems as you describe above - all fixed since I installed software from JetWare (use google to find). Hope this helps.
hdd123
hdd123 said:
Hi, I don't know if this will solve your problem but here goes anyway. When I first got my phone (Orange SPV M3100), I could not connect to installed BT system in my Audi A4. I understand from what I have read that this is due to a slight difference in BT specification used by WM to that used by mobile phone manufactures. I had similar problems as you describe above - all fixed since I installed software from JetWare (use google to find). Hope this helps.
hdd123
Click to expand...
Click to collapse
hrmm, I'll try that too but my question is that my phone used to work just fine, now with the latest rom the problems with bluetooth started, that's what I am pointing out.
Hi all.
I've a Seat Leon too, with bt integrated.
Since i upgraded to first WM6, i have no problems with hands free, but i must get the PDA on. If i put PDA off, BT starts to disconnects and reconnects, and finally BT goes off.
With all WM5 i've tested, the BT disconnects and reconnects every time with the PDA on.
Think there is an issue with the way the handsfree get info from the phone, cause normal phone works without this issue.
Regards.
Im also using Pro 2.5 and have noticed that my BT for my Handsfree car kit is playing up. I can connect and it works but when I leave the car and come back I need to shut down and then restart Bluetooth to reconnect. Bit of a pain atm.
try the widcomm stack
http://forum.xda-developers.com/showpost.php?p=1234724&postcount=507
Also having problems, Parrot Rhythm 'n Blue, it droppes during calls and reconnects after a minute (not always).
I already use Jetware, so I fear that doesn't do the trick. According to the reactions in this thread this really seems to be a problem...
jasjamming said:
try the widcomm stack
http://forum.xda-developers.com/showpost.php?p=1234724&postcount=507
Click to expand...
Click to collapse
Ok thanx, I'll try that and report back...
It's the BT implementation in the phone (either HTC or Microsoft), other phones work fine. Anyho: for me the previous LVSW (03-26) works fine and since I don't need the other 'stuff', I'm using that release.
My $0.02
nukenine said:
It's the BT implementation in the phone (either HTC or Microsoft), other phones work fine. Anyho: for me the previous LVSW (03-26) works fine and since I don't need the other 'stuff', I'm using that release.
My $0.02
Click to expand...
Click to collapse
if dutty is not able to release the v2 with the old bluetooth stack I will downgrade to that version too...
I will also try the jetware tonight and let u know.
thanks
MegaHz said:
if dutty is not able to release the v2 with the old bluetooth stack I will downgrade to that version too...
I will also try the jetware tonight and let u know.
thanks
Click to expand...
Click to collapse
as said: I use the jetware software already and got the same problems... not always, but frequently.
I'm currently using Black 2.5 w/an '07 Infiniti FX and have zero dropout issues. I love it actually, I got in my car this morning and it reconnected automatically when I got a phone call, no problem
MegaHz said:
if dutty is not able to release the v2 with the old bluetooth stack I will downgrade to that version too...
I will also try the jetware tonight and let u know.
Click to expand...
Click to collapse
guys, finally the jetware did the job, the bluetooth stopped on keep disconnecting, let's hope that MS will fix the problem on the next release.
Hi all, another SEAT Leon driver with bluetooth handsfree problems here
My Vodafone v1605 suffered the dropout problem when it was on the stock Vodafone ROM.
I used the WM Black 2.0 ROM for about a day before the 2.5 ROM came out and didn't suffer the problem.
Since going to Black 2.5 I have suffered the problem intermittently. When the phone is running on battery it frequently disconnects/reconnects. However it appears to be pretty stable when on charge in the Brodit powered mount. I would guess that the major difference is that when on charge the phone doesn't go into standby mode.
I am tempted to go back to 2.0 and test for a while longer, especially as my device code has been updated with 2.5 so TomTom is not currently activated
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?
I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.
walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk
i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...
Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.
Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??
My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.
Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.
On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.
BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.
Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
Click to expand...
Click to collapse
Same problem here... when upgrade to WM6 official the sound in the car is gone when dailing. Phone is connected but I'am unable to hear anything... everything goes into mute...
I'm stuck with the very same problem. I'll try JetWare and change some configs, but I fear it will not work.
If I have any news I'll post them.
Regards
P.D My car is a Citroen C4, and original Citroen bluetooth I think is a Parrot 3000 or 3100
I have the same problem.
Car kit BT Peugeot 207 and HTC 3300 with cooked room wm6.
I've installed jetware extension. I can hear sound in the first call but when I hang up the next call, the same problem .. no soud.
renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
e problem.
Please help.
Rene
Click to expand...
Click to collapse
Has anyone found a solution for this? I have found deactivating the bluetooth and reactivating on the call works.
I would hope someone finds a solution. What would be the downside of going back to WM5?? I cannot remember why I upgraded now.....
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Alvinillo said:
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Click to expand...
Click to collapse
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
azreal1983 said:
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
Click to expand...
Click to collapse
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Alvinillo said:
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Click to expand...
Click to collapse
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
azreal1983 said:
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
Click to expand...
Click to collapse
Nice!
But I find a problem, isn't your O2-XDA also known as Wallaby? I mean, if I'm right you are posting in the wrong forum or at least you should be advised not to install another PDA ROM on yours becouse you risk to brick it. We are posting at Artemis forum. Of course, Bluetooth problem seems not related to PDAs but WM6
On this forum there is info about how to unlock your PDA. Unfortunately I dont find any ROM for your device.
Regards
Same Problem
hi all,
207 FACTORY KIT / M650
I have the same problem, only the original ROM under WM5 work properly...
I Tried many bluetooth soft on several tips and WM6 release...
AJE , 1.5 / 6 /8 / 9 / 2.0 beta........
Now i am under B&B 5 (WM6.1) and the problem persist
I note that if i desactivate bluetooth stereo and fix sample rate to 44Khz, it looks to work a little better than before.
If i wait between 2 phone call (out), it works much.
If i answer to a phone call with the remote control it never works.
If i answer with green touch on the phone it work ALL the time.
Are we condamned to stay under WM5 !??
WM5 -> bluetooth but no CRM (does'n't want to work)
WM6 -> No bluetooth but CRM...
I choose to work on this but any result, since more than eight month...
HEEEEEEEEEEELLLP US AND SHAME ON PA**OT
PS: HTC and parrot pass a deal to increase compatibility of their product...
Since this time does anybody tel to parrot on this problem ?
Does newer HTC product originaly under WM6 work fine one factory kit (peugeot/citröen 207/C3...) because if no, i think parrot sucks ! they update firmware on all their product, but for product sells to peugeot or citroen -> NOTHING
Thx for the info. It's a pity that the problem persist on WM6.1
We are hooked to WM5 and to my eyes, the Artemis and PocketPCs look older than ever.
At the end, I think it is a Microsoft problem. PSA Bluetooth CarKit works flawlessly with WM5 so Microsoft changed something to the Bluetooth stack on WM6. Shame on them.
I'll wait to WM7, but I don't have too much expectations.
Regards
Some hotfixes are available from HTC regarding bluetooh, only not for the Hermes. damm.
Anyone tried one of these already? Currently still not able to updrade to WM6.1
http://forum.xda-developers.com/showthread.php?t=385128
And one recently for the Diamond..:
6/16/2008
Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
If you are using the Bluetooth headset, “Jabra JX10”, “Jabra BT500” or “Samsung WEP 150”, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.