Develop Bugs

Newbie question about bluetooth on my blueangel

Hi there,
Apologies for no-doubt coming across like a complete noob, but I am
A friend of mine recently let me borrow his Orange SPV M2000. He has burnt a different firmware image onto it - it says 'i-mate' when it boots rather than 'Orange' (the details are below).
Anyway, I am having trouble connecting the device to my Jabra 250v headset. I have tried all kinds of different connection settings but I get the same message:
Connecting...
(followed, about 20 seconds later, by)
Connection failed.
- Waiting for device
x Connection failed.
The device paired OK. Also, I have managed to successfully pair with a friend's phone and transfer files from his phone to my device.
This is driving me mad! Surely someone must be able to put me out of my misery?
Thanks,
Nik
--
Orange SPV M2000 (WM 2003 SE)
Operator Version : ??
ROM Version : 1.40.00 WWE
ROM Date : 03/10/04
Radio Version : 1.13.00
Protocol Version : 1337.42
ExtROM Version : 1.40.176 WWE
Under 'Bluetooth Settings: Advanced', every .exe and DLL is listed as v1.0.0.3900.

Hi,
I would have thought that at least one of the 40+ people who have read this post would have had *something* to say?
If there is a bluetooth FAQ or troubleshooting guide somewhere, please point me at it!
Cheers,
N

moralcrusader said:
Hi,
I would have thought that at least one of the 40+ people who have read this post would have had *something* to say?
If there is a bluetooth FAQ or troubleshooting guide somewhere, please point me at it!
Cheers,
N
Click to expand...
Click to collapse
Maybe i can help. I have had your same problem with my 250v (the same as yours) and my wm2003 rom.
The difference is that you say it DOES pair and when i tried (several times, with different wm2003 bt stacks) it did not even show me an available headset.
Other BT devices and the PDA in total, was working great, but... no working headset. I tried a different brand headset (can you still return yours?) and it worked. I got the S2 and G2 working, but i have had lots of probs with crackling noises on the line, so it was terrible to use (read useless, to my opinion).
On different forums the ericson HB... series is mentioned as working great, in combination with ppc2003, but i was too late on returning the device to the store and 1st kept the s2. Also you can READ and LOOK UP YOURSELF on different fora that the widcomm/broadcomm stack is not so good at all because even with a good headset, you get lots of cracks on the line when the headset and ppc are more then 1 mtr appart (or even less).
The S2 (very plastic and noisy) was working very bad for me and then my boss gave me a new jabra 250v. Unfortunately it didn't was discovered on my wm2003 pda.
Ok, so far my problem. The solution.
I have upgraded to wm2005 via helmi's 3.2 WM2005 ROM (on wiki). This has a sort of ms bt stack wich supports the jabra very well. Now i have no cracks, perfect sound on headset (hearing and speaking) and all other main programs still work (among gps).
So u choose, return headset and try a different one of flash to WM 2005. All other wm2003 options that are there (audio dll's other stacks, etc) i have already gave a try and do not work!

Sorry for the impatience. Looking at what I wrote, and how soon after my original post, all I can say in my defense is that I am having a tough week and lost the plot a bit
Sorry.
Thanks for the info. At least I know I am not the only one with problems! I am tempted to upgrade to WM5, mostly out of curiosity but also because it looks nicer (a poor reason to upgrade, perhaps?). Then again, I think I'll drop into my local Orange store tomorrow and try a couple of different headsets. I have had my old one for years now and had been using it with my Nokia. I am sure they won't notice that I am not using an Orange ROM
I'll let you know how I got on - probably one the weekend.
Cheers,
Nik

[HTC 8525 + WM6] Bluetooth keeps disconnecting

Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!

viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?

I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.

walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H

viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk

i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...

Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.

Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?

I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!

ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??

My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.

Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.

On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.

BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.

Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.

HTC WM6 - Car Kit Bluetooth Problem (no sound at all)

After upgrade to the official HTC WM6 ROM (spanish version) my integrated bluetooth hansdfree CAR-KIT doesn't work anymore (with WM5 the system works perfectly).
The car is a new CITROËN C4 Picasso, but i think this problem must involve any new PSA Group Car (CITROËN, PEUGEOT...) that mount the same kit.
I can pair the CITROËN hansfree with the TyTN, and both connects (i can see the operator name, the battery level, and the signal level, that WM5 stack doesn't show) but when i try to call, or i receive a call, there is no sound throw the hansfree system.
I also have tried the Jetware bt extension with no succes.
At now i had to downgrade to WM5 because this problem (i need the handsfree working).
The cuestion is...
Is it possible for a ROM MASTER to extract a previous bluetooth working TyTN stack to overwrite the stack that comes with official WM6?... (the WM5 or any working WM6 working stack).
Thanks

The same problem here with the same car; also the Artemis on WM6 (I tried several roms) has no sound.
Downgraded to WM5, and it's all working again.
Not yet tried to get an update for the car; maybe there is also a solution.

I have the same problem with Motorola HF-850 car kit. I'm about to downgrade too. This sux.

Same issue here with Nissan Sentra 2008.
I can dial and receive calls but the audio works about 30% or the time. It is hit or miss.

Same here in a 2007 UK CITROËN C4 (5 door hatchback) with factory fitted Bluetooth car kit, using an Orange M3100 with the Schap's WM6 Pro 3.60a ROM. Looks like I'm going back to the Orange WM5 ROM as this is a deal breaker for me. Very disappointing.

try this
I had similair problems a few pretty good solutions:
-jetware search google i use this one
-Solution:2
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone
see this thread
http://forum.xda-developers.com/showthread.php?t=290871

Thanks!
I tried the Jetware solution: no luck.
I also tried the COD trick: very strange result, I was able to make just 1 (one) call and other calls were again not possible (no sound).
Maybe there is a solution in updating the software of the handsfree set in the car. I will ask my Citroen agent to do this, if possible.
I will post the results.

I haven't tried the COD trick, but I don't think this will work. It's not a case of my car 'ignoring' my M3100... it pairs OK, and the car's display shows an incoming call, allows me to pick it up, etc, but no sound comes out of the speakers and the other party doesn't hear my voice. It's like the car is receiving the data stream to tell it what's happening on the call, but not the sound.
I don't have any of these problems with WM5, I don't even need to use the JetWare solution.

same problem with Peugeot 407
Same problem here with Peugeot 407
What I found is that if I start a call without Bluetooth and start Bluetooth during the caal, the sound works perfectly. Every next call has the same problem as before though.
TyTN; WM6 Schap's 3.60a;Radio 1.47.00.10

Hi.
I am with Motorola's HF-850 car kit and I get the sound only after 8-10 full seconds from answering. It is so sad that I have to say "wait....wait" every time I answer a call....

There is a post on this forum that suggests someones got it working with an Audi and the latest Black beta rom...
http://www.4winmobile.com/forums/hermes-black-rom-support/11291-black-x-beta-2-smash-trash-11.html
Anyone tried this?
This post also suggests that the newest Black roms may have fixed the issue
http://htc-devs.com/forum/index.php?topic=42.msg321;topicseen
Here's hoping!

That will not work on the Artemis
But I tried several WM6 roms, including the Black & Blue 4.1: no luck.
Looks like a real WM6 issue, as it's happening with several phone models.
UPDATE: No software update for the factory Citroen bluetooth handsfree according to the local dealer; so that's no solution

I have tried 5 of the latest roms yesterday including all the fixed mentioned in this forum. The best I got was with Sleuth rom where I get audio about 50% of the time. Answering with that rom results in a 5 seconds delay before audio connects causing me to yell "wait, wait, I am here ... "
I even tried a blootooth stack from Broadcomm but the result was not better.
Out of desperation as I bought this car specially for its built in bluetooth kit, I downgraded to Cingular Mobile 5 Rom version (2.15.502.3)
I am surprised and kind of thrilled to report that my 8525 and the car kit are working perfectly together and reliably.
There must be either a bug or a setting/configuration issue on the Mobile 6 bluetooth stack that caused this issue. I am unfortunately back to mobile 5 for the time being until this issue is resolved.

SPV m3100, CK3100 AND WM6
I have an Orange SPV M3100 in Spain with WM6 and i have the same problem. With WM5 and Jetware estension, i had to pair parrot and pda manually every time i got into my car, because they did not connect automatically (Blueetoth-->Devices-->Parrot CK3100-->FreeHand-->OK), but then it works well and i could receive and make phone calls.
But since I upgrade to WM6 i have to pair it manuaaly too, they connect, but it only works from time to time; most times, if i make a call it dials but i cannot speak and people does not hear me; if there is an incoming call, I see the number in the displsy but i can receive it.
Anybody with WM6 and Parrot Ck3100 works well?

I have the same problem with a Mio C520 SatNav. Its bluetooth handsfree works fine with WM5 but not WM6.
I also posted this on a thread on bluetooth headsets, http://forum.xda-developers.com/showthread.php?t=301636&page=6
I tried many different versions. So far with Sleuth's WM6, I had sound around 50% of the time. Similar to one of the previous posters.
Until there is a fix I will have to go back to WM5

I use a parrot car kit and it works fine. However, I noticed some new functionality on my lcd, like displaying battery and signal levels which was not available with the original WM5. That was available only with specific phones. Based on that I believe that a firmware update of your car kit could solve the problem. The issue is whether this is provided for you and if you will have to pay. Parrot offers them for free and you can upgrade via BT.

Bluetooth carkitt no longer working after upgrade to WM6

A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene

renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
The carkitt I have is the factory carkitt in a Peugeot 307SW. I've read somewhere this carkit is made by Parrot and can also be found in the Peugeot 207, Citroen C4 end some Seat models. Googling showed averyone with those carkitt's has the same problem sinde the upgrade to WM6. It all worked fine in WM5 by the way. I've also tested with several non official WM6 roms, but it's still not working.
Connection and pairing the phone is not the problem. I do see the contact list in my car display and I can even see the battery status. The problem is when I dail. My speakers mute my radio/cd sound, but I don't hear the phone through them. It's just silent. I can't hear the person answering the phone and I don't hear the dial tone. The strange thing it sometimes works. I have the impression it starts to work after I strated tomtom, but I'm not sure about it. What never works is when people call me. The phone rings, but when I answer I can't hear the person on the other side.
Is there any way to fix this? It looks like bluetooth 2.0 isn't 100% compatible with bluetooth 1.1 or it's a bug in WM6. There is no upgraded firmware for my carkitt available and like saif before, a lot of other car owners have the same problem.
Please help.
Rene
Click to expand...
Click to collapse
Same problem here... when upgrade to WM6 official the sound in the car is gone when dailing. Phone is connected but I'am unable to hear anything... everything goes into mute...

I'm stuck with the very same problem. I'll try JetWare and change some configs, but I fear it will not work.
If I have any news I'll post them.
Regards
P.D My car is a Citroen C4, and original Citroen bluetooth I think is a Parrot 3000 or 3100

I have the same problem.
Car kit BT Peugeot 207 and HTC 3300 with cooked room wm6.
I've installed jetware extension. I can hear sound in the first call but when I hang up the next call, the same problem .. no soud.

renepela said:
A few days ago I upgraded my HTC P3300 to the official WM6 rom.
All works fine except calling using my bluetooth carkitt.
e problem.
Please help.
Rene
Click to expand...
Click to collapse
Has anyone found a solution for this? I have found deactivating the bluetooth and reactivating on the call works.
I would hope someone finds a solution. What would be the downside of going back to WM5?? I cannot remember why I upgraded now.....

I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards

Alvinillo said:
I finally downgraded to WM5, but I'm interested in knowing if new WM6.1 ROMs have corrected the problem. We have both Blak&Blue and Vanilla versions based on WM 6.1
I've not upgraded to WM6.1 because I'm tired of problems. If someone try to install it, please report
Regards
Click to expand...
Click to collapse
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5

azreal1983 said:
Can you advise me how you downgraded? I have a UK o2 XDA. what is yours? Can you provide the links and instructions for me do get back to WM5
Click to expand...
Click to collapse
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards

Alvinillo said:
Mine is an HTC P3300 locked to local Movistar provider. To downgrade, you must find a WM5 ROM, that's all. I found ART_HTCESN_1.14.412.1_026790_ESN_Ship.exe but it is Spanish, so probably it doesn't interest you.
Downgrade procedure was exactly the same as upgrade.
Would you be so kind to test some WM 6.1 releases with the car's bluetooth before downgrading to WM5?. It could work and I assume that in any case you are going to reinstall everything, so a kick install should be not much of a problem.
Regards
Click to expand...
Click to collapse
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?

azreal1983 said:
Yeah i would be happy to.
If someone can point me in the direction of what I have to do.
I have a UK o2 XDA, so I assume I would need to unlock it first?
Click to expand...
Click to collapse
Nice!
But I find a problem, isn't your O2-XDA also known as Wallaby? I mean, if I'm right you are posting in the wrong forum or at least you should be advised not to install another PDA ROM on yours becouse you risk to brick it. We are posting at Artemis forum. Of course, Bluetooth problem seems not related to PDAs but WM6
On this forum there is info about how to unlock your PDA. Unfortunately I dont find any ROM for your device.
Regards

Same Problem
hi all,
207 FACTORY KIT / M650
I have the same problem, only the original ROM under WM5 work properly...
I Tried many bluetooth soft on several tips and WM6 release...
AJE , 1.5 / 6 /8 / 9 / 2.0 beta........
Now i am under B&B 5 (WM6.1) and the problem persist
I note that if i desactivate bluetooth stereo and fix sample rate to 44Khz, it looks to work a little better than before.
If i wait between 2 phone call (out), it works much.
If i answer to a phone call with the remote control it never works.
If i answer with green touch on the phone it work ALL the time.
Are we condamned to stay under WM5 !??
WM5 -> bluetooth but no CRM (does'n't want to work)
WM6 -> No bluetooth but CRM...
I choose to work on this but any result, since more than eight month...
HEEEEEEEEEEELLLP US AND SHAME ON PA**OT
PS: HTC and parrot pass a deal to increase compatibility of their product...
Since this time does anybody tel to parrot on this problem ?
Does newer HTC product originaly under WM6 work fine one factory kit (peugeot/citröen 207/C3...) because if no, i think parrot sucks ! they update firmware on all their product, but for product sells to peugeot or citroen -> NOTHING

Thx for the info. It's a pity that the problem persist on WM6.1
We are hooked to WM5 and to my eyes, the Artemis and PocketPCs look older than ever.
At the end, I think it is a Microsoft problem. PSA Bluetooth CarKit works flawlessly with WM5 so Microsoft changed something to the Bluetooth stack on WM6. Shame on them.
I'll wait to WM7, but I don't have too much expectations.
Regards

Some hotfixes are available from HTC regarding bluetooh, only not for the Hermes. damm.
Anyone tried one of these already? Currently still not able to updrade to WM6.1
http://forum.xda-developers.com/showthread.php?t=385128
And one recently for the Diamond..:
6/16/2008
Hot fix for resolving Bluetooth headset sound problem that occurs when reconnecting with HTC Touch Cruise
If you are using the Bluetooth headset, “Jabra JX10”, “Jabra BT500” or “Samsung WEP 150”, and the headset becomes out of range or undetected by the HTC Touch Cruise, in certain circumstances, you may be unable to hear any sound from the headset even after it has reconnected successfully with HTC Touch Cruise. Please install this hot fix to improve the connection when using the above-mentioned Bluetooth headsets.

Bluetooth H/free & GPS Problems after WM6 upgrade

Hi all, First of all I'd like to say this is the most informative forum I have been involved with . Up till now I haven't needed to post any questions.
Now....
I have an i-mate Jasjam herm200 (purchaced from Telstra). Until recently I was running WM5 which it was shipped with. Apart from the slow speed of the PPC (due in part to the Telstra Bloatware) it ran fine.
Since then I have tried many cooked ROMS inc. all Jasjamming's WM black editions, Most of Schaps WM6 and a few others, and I'm having problems with connecting my HS850 headset & my Altina GBT709 GPS receiver.
The Headset,
After pairing the headset I found that when making or receiving a call the person on the other end can only hear me for a few seconds but I don't hear anything, then when the headset Icon appears on the screen the call remains active but I can't hear the other person & they can't hear me.
I reflashed the Telstra Jasjam shipped WM5 rom: 1.31.305.2_106_6275_1.38.30.10_108_ship and the headset stilled didn't work , reflashed it with the same rom again (various WM6 roms in between) and it will work fine.
Can someone tell me if the problem is with the HS850 or the WM6 upgrade?
The GPS,
Since I have started flashing different roms I have never been able to connect the Altina 709 to TomTom Navigator 6, even when reflashed with the shipped rom. I cannot figure out if the problem is with the Bluetoth or a configuration issue with my PPC.
I can live without the GPS as I have a stand alone TT GO 500, but not being able to connect the bluetooth headset properly is driving me NUTS!!!
Please Please Please can someone help me figure this out.
Squirt

Any ideas people?

Don't know if this helps,but I found the Telstra customisations that you can install give me grief with my parrot car bluetooth system - they mess with the bluetooth stack in some way. I found the Telstra WM5 rom didn't play nicely either, which was my main incentive to upgrade to WM6. Are you using a clean install of the WM6 roms without tacking any of the telstra stuff on top?
I eventually found a .cab with just the proxy manager which is all I needed, and schap's roms work nicely for me regarding bluetooth, so I'm a bit wary of fiddling with it now.... I know the black series (and a few others that must have used the same build) had bluetooth issues for me.

Thanks for your reply, I'm currently running Black 3.0.1 which has been the closest I've got to getting the BT H/Free working.
With 3.0.1 I can hear the person on the other end through the phone speaker not the BT, BUT, They can hear me through the BT headset........strange.
I'm just waiting to catch up with a bloke from work with a different brand BT Headset to see if it makes a difference.