I did not install the EXT ROM, it is there ?
well.... i press the speech bubble button next to the camera and it appears, does yours not do this?
and after doing that, its now appeared in the start menu.
wierd setup or what
Related
I lock my PDA during the day so co workers don't mess with it, but I used a password I forgot, I need to do a complete reset to get past the password, can anyone help me? Please I miss my phone.
Thanks,
Joe
i get same problem last day on my SX66, maybe you can try to do this hard reset as instruction below, backup your data first before perform it, hope will help you
HARDRESET 101
Steps...
1. SoftReset
2. When the three color stripes(four including white) appear QUICKLY press and hold Record and Camera button.
3. If a menu appears... (if not softreset again while holding Record+Camera)
use Record To NAVIGATE the three items and Camera to TOGGLE Yes/No
4. Press Mail button to Execute the Instructions.
Hi,
this afternoon i was trying to flash the ROM of my LG KS20 when i read the combination to enter in the engineering menù. So i looked a bit through the different menus until i click on "Backlight On-Off" option in the "LCD Test" menu.
At this point, the screen on my LG turned off and now i can see that phone still working but the screen remains always black. For example if I click the power button on the right of PDA, the 2 button turn their light on but the screen remains black.The same is when i push the button of photograph machine...if I wait a few second and push again the button the PDA take a photograph because the flash work and i can hear the sound of shutter.
I try to hard reset the PDA, but all remains the same....what can I do???
Please help me
Thans a lot
Maybe you could try to install a software called "My Mobiler" (http://www.mymobiler.com - it's freeware). With this software you could access your KS20 through your PC and try to revert the settings in the LCD Menu?
thanks a lot....last night I found MyMobiler searching somethings for view the device screen on my desktop. After I installed it on my PDA (with some little problem to give the ok for the installation on PDA), I can see the device desktop and so I do the same procedure to restore the backlight.
So now all works fine.
Thanks
Have the same problem
but i not lucky... can't press ok on the black screen, can you publish screen with instalation on PDA to try locate the OK??
really thanks
On your screen, you should see the standard view of the installation process.
So, when you launch the install from your pc, you have to immagine the screen of the acknoledge of the install. try to push in the left corner at the bottom a couple of time, then you shoud see the today screen on your pc.
Same problem
I have the same problem, but I need to enter my pin, but I'm not able to enter it because I can't see anything...
And I change the USB settings in the engineering menu so I cannot connect with ActiveSync :S
Any idea?
Thanks a lot.
I'm useing haret 0.5.2 on wm65, polaris. This situation dosent appear every time.
I found there's a rule:
When I hit button RUN, if the system reboots immediately after about 3 sec and starts to scroll white text, and then I hold the button right after I see the text, I can enter the system menu.
BUT, if the system reboots after about 30 sec, however and whenever I hold he button, it dosent work.
Somebody can kindly help me through this problem?
BTW, can I use old version of haret, eg. the version that without RUN button, to run Android 2.1?
---------------- update 20100625 -------------
Still nobody replys~~~~~~~~
BUT I've figured it out myself.
I found that it might have something to do with the file zImage. If I get a proper zImage, I can see the boot menu every time. U can have a try if u r facing the same problem.
And for the second question, the answer is NO.
Me too, sometime I cannot get into boot menu by pressing D-Pad button, but I can use volume up (right softkey) button instead.
I'm using NAND and I think it's because of the nbh file.
Hello to everyone, i want to install this rom on my Gio, but i'm quite confuse about to install patch and icstheme...
do i have to just instal from zip, or before to install zip, do i have to mont data or system?!
thanks :fingers-crossed:
I answered you over PM, but let me say again, maybe someone else will need it.
Yes, you need to mount system before installing patch and icstheme.
RonninDAMN said:
I answered you over PM, but let me say again, maybe someone else will need it.
Yes, you need to mount system before installing patch and icstheme.
Click to expand...
Click to collapse
Yess done, i've done!
but i want to know somethig;
on a address book, when i tap on a contact photo, all desapear, is it normal?!
can i change status bar color?! i think is trasparent, i want set it black!
when i long press home button, and see all open application, i can't close them if i slide left or right, is a bug?!
if i go to the keyboard setting( from message) background is trasparent... it's very annoying!
when i have to connect via usb, i can't press connect button, i have to turn the phone to lanscape mode to see the button connect, is it possible to fix it ?!
I think you use this rom , do you have the same bugs?!
P.s: sorry about my bad english!
cloudseth said:
Yess done, i've done!
but i want to know somethig;
on a address book, when i tap on a contact photo, all desapear, is it normal?!
can i change status bar color?! i think is trasparent, i want set it black!
when i long press home button, and see all open application, i can't close them if i slide left or right, is a bug?!
if i go to the keyboard setting( from message) background is trasparent... it's very annoying!
when i have to connect via usb, i can't press connect button, i have to turn the phone to lanscape mode to see the button connect, is it possible to fix it ?!
I think you use this rom , do you have the same bugs?!
P.s: sorry about my bad english!
Click to expand...
Click to collapse
1. Well, it ins't normal, it's kinda bug.
2. I don't think there's option for that, but you can try with UOTkitchen ( http://uot.dakra.lt/kitchen/ ) to make your own status bar.
3. No it's not a bug, the rom doesn't have that option. Those are just recently used apps, it doesn't affect your ram or something.
4. Yeah, it is annoying.
5. Just press on that big android picture. Picture is like a button.
There are a lot of theme issues, but rom is ok.
Well, i've tried to use uot kitchen , but statusbar doesn't change!
thanks anyway, i'll post this but on official discussion, matz can resolve this problems on next relase!
:fingers-crossed:
Hi,
I got a little annoying problem that I can't seem to get fixed.
I don't get any vibrations whenever I get a notification apart from Whatsapp and Instagram.
So Mail, Snapchat, ... nothing.
Notification sound does work though!
But I got some more information which might help troubleshooting.
I use Lightflow because I don't want to have the LED except on very certain apps and I disabled these really annoying Banner notifications completely with the ADB command "heads_up_notifications_enabled 0"
I am pretty sure that I had working vibrations before the ADB thing but I don't see a real connection between Banners and Vibration especially because WhatsApp works correctly, just everything else doesn't.
I tried this solution but it didnt work:
Code:
Go to Setting -> Apps, click on the 3 dots in the upper right hand corner and select "Show system apps"
Scroll down and click on "BadgeProvider" app
In app properties, click on "Storage", clear both the Cache and Data.
Shut down the phone and following the directions below to "wipe cache partition".
Wipe cache partition
Turn off the device.
Press and hold the Volume Up key and the Bixby key, then press and hold the Power key.
When the Android logo displays, release all keys ('Installing system update' will show for about 30 - 60 seconds before showing the Android system recovery menu options).
Press the Volume down key several times to highlight “wipe cache partition.”
Press the Power key to select.
Press the Volume down key to highlight “yes” and press the Power key to select.
When the wipe cache partition is complete, “Reboot system now” is highlighted.
Press the Power key to restart the device.
Galaxy S9
Telekom
Unrooted
ADB: Changed Banners and Ran the bxActions thing
I hope someone has an idea.
Thanks
EDIT: Okay it's solved. Apparently the mail program decided to switch the vibrations off by itself randomly and in Snapchat it was my stupidity to overlook the settings. Nevermind then