Related
Can anybody help to define, How push email is setup? and how it can work on imate jasjar
Check this out: http://www.htcclub.net/en/toontips.php?ID=10
Exchange SP2 setup
Does anyone have any info on what is required from Exchange to set this push mail up. i.e. HTTPS access from web, etc
Also i am on vodafone so what would my device address be? i.e. sms://<number> etc? do you need this? :?
Thanks.
Exchange SP2 setup
Does anyone have any info on what is required from Exchange to set this push mail up. i.e. HTTPS access from web, etc
Also i am on vodafone so what would my device address be? i.e. sms://<number> etc? do you need this? :?
Thanks.
Hi deluxe,
Can you tell us what version of Exchange you are pointing to and are you trying to configure the sync from the device or via the ActiveSync desktop wizard?
I assume you have a AKU2 ROM installed on your device.
Setting up push email is very easy to do provided you have a box running OWA with SP2 applied (ideally SP2 on all boxes but you can get away with it just on OWA and the server with your mailbox). The default settings on the Exchange end should be enough to get you going.
You mention you’re being prompted for the device address, which implies that Exchange is falling back to using “Always Up To Date” (i.e. sending an SMS to your device each time you get a new mail). This is almost definitely not what you want to use. Are you sure you have SP2 installed?
Anyway, I am rambling so here is a simple check list.
Exchange SP2 on the OWA/Mailbox servers.
AKU2 Windows Mobile 5 Rom on the device.
ActiveSync 4.1 on the PC if you use the PC wizard.
Synchronisation with Exchange working ‘before’ trying to configure Direct Push from the scheduling options.
Access to your OWA (or ISA etc.) server via whatever means you want to run Direct Push over (i.e. WiFi, GPRS Internet APN, Private APN etc.)
Do we have any idea on the impact on the Data bill regarding the Push ? (Of course it will depend on HOW MUCH spam you receive ) but just having the PUSH always on, will this effect our data bill ?
Cheers
I am running exchange 2003 sp2, but currently do not have access outside the company .i.e. i have not nated it out. i have the website running internally so i presume i just need to nat the server to a public address.
I was trying to use activesync to set this up, and i am running the new rom.
djwillis said:
Hi deluxe,
Can you tell us what version of Exchange you are pointing to and are you trying to configure the sync from the device or via the ActiveSync desktop wizard?
I assume you have a AKU2 ROM installed on your device.
Setting up push email is very easy to do provided you have a box running OWA with SP2 applied (ideally SP2 on all boxes but you can get away with it just on OWA and the server with your mailbox). The default settings on the Exchange end should be enough to get you going.
You mention you’re being prompted for the device address, which implies that Exchange is falling back to using “Always Up To Date” (i.e. sending an SMS to your device each time you get a new mail). This is almost definitely not what you want to use. Are you sure you have SP2 installed?
Anyway, I am rambling so here is a simple check list.
Exchange SP2 on the OWA/Mailbox servers.
AKU2 Windows Mobile 5 Rom on the device.
ActiveSync 4.1 on the PC if you use the PC wizard.
Synchronisation with Exchange working ‘before’ trying to configure Direct Push from the scheduling options.
Access to your OWA (or ISA etc.) server via whatever means you want to run Direct Push over (i.e. WiFi, GPRS Internet APN, Private APN etc.)
Click to expand...
Click to collapse
Daimaou said:
Do we have any idea on the impact on the Data bill regarding the Push ? (Of course it will depend on HOW MUCH spam you receive ) but just having the PUSH always on, will this effect our data bill ?
Click to expand...
Click to collapse
In our simple tests your looking at about 10-12MB + mail volume on a stock config. You can make that a fair bit less by tweaking the heartbeat to a more reasonable 20-40 mins (knocks a few MB off, about 8MB + mail volume @ 40 min heartbeat).
deluxe said:
I am running exchange 2003 sp2, but currently do not have access outside the company .i.e. i have not nated it out. i have the website running internally so i presume i just need to nat the server to a public address.
I was trying to use activesync to set this up, and i am running the new rom.
Click to expand...
Click to collapse
As I assume you don't have a private APN then without making the server public (via a firewall, ISA server or as a last result simple NAT) is the only way your going to make this work.
If you use SSL make sure the cert matches the public (internet) address of your server and that you have an approperate root cert installed on your device if you use an internal CA. You can use it over HTTP just fine but it's not secure in the least and I would not suggest it unless you had a private APN.
When you have the server exposed just get manual syncing over the air going from the device, then we can tackle DirectPush.
Re: Exchange SP2 setup
deluxe said:
Does anyone have any info on what is required from Exchange to set this push mail up. i.e. HTTPS access from web, etc
Also i am on vodafone so what would my device address be? i.e. sms://<number> etc? do you need this? :?
Thanks.
Click to expand...
Click to collapse
I asked Vodafone Spain and they told me this service is not available for Vodafone, I can't understand. I'm planning to move Telefonica because they have it running.
Daimaou said:
Do we have any idea on the impact on the Data bill regarding the Push ? (Of course it will depend on HOW MUCH spam you receive ) but just having the PUSH always on, will this effect our data bill ?
Cheers
Click to expand...
Click to collapse
From the speed of receive the e-mail in the TS2 demo's I've seen, would you agree that Exchange is pushing the email before the filters can scrub it? I think this would be an area of huge improvement if MS would conduct the push later down in the process of receiving/delivering the e-mail.
Re: Exchange SP2 setup
beginner said:
deluxe said:
Does anyone have any info on what is required from Exchange to set this push mail up. i.e. HTTPS access from web, etc
Also i am on vodafone so what would my device address be? i.e. sms://<number> etc? do you need this? :?
Thanks.
Click to expand...
Click to collapse
I asked Vodafone Spain and they told me this service is not available for Vodafone, I can't understand. I'm planning to move Telefonica because they have it running.
Click to expand...
Click to collapse
I dont really get the point here. I mean, Vodafone offers REAL MAIL, isnt it the same as Push mail?
Re: Exchange SP2 setup
jmcl said:
beginner said:
deluxe said:
Does anyone have any info on what is required from Exchange to set this push mail up. i.e. HTTPS access from web, etc
Also i am on vodafone so what would my device address be? i.e. sms://<number> etc? do you need this? :?
Thanks.
Click to expand...
Click to collapse
I asked Vodafone Spain and they told me this service is not available for Vodafone, I can't understand. I'm planning to move Telefonica because they have it running.
Click to expand...
Click to collapse
I dont really get the point here. I mean, Vodafone offers REAL MAIL, isnt it the same as Push mail?
Click to expand...
Click to collapse
jmcl: REAL MAIL is a service provided by vodafone supporting imap or pop3 mail, in the case you haven't a corporate exchange server or lotus. If you have some corporative mail server, with an exchange server, vodafone doesn't add value. In this case should be nice to have a mail address where you can receive sms, in other words, imagine a mail address that is connected directly to your sms inbox. There are other applications -for example verichat- that use this sms/mail address in order to send your device messages when you are not online.
does anyone have the setting for o2 in the uk?
Thanks
Paul
Push mail syncs every 10 minutes
I have a trial account with 4smartphone , push mail works great.
Although I adjusted syncing schedule from my JasJar to "As Items arrive" , it keeps syncing every 10 to 15 minutes!!
any ideas?
Re: Push mail syncs every 10 minutes
simx said:
I have a trial account with 4smartphone , push mail works great.
Although I adjusted syncing schedule from my JasJar to "As Items arrive" , it keeps syncing every 10 to 15 minutes!!
any ideas?
Click to expand...
Click to collapse
its not push mail unless its "As Items arrive", its just normal activesync checking,
also need the direct push enabled for it.
it does rock tho i have mine set to "As Items arrive" for peak and manual for offpeak, as im on the machine i use the account on in the evenings, so its basically now set for push mail in my working hours and manual when im at home,
Re: Push mail syncs every 10 minutes
simx said:
I have a trial account with 4smartphone , push mail works great.
Although I adjusted syncing schedule from my JasJar to "As Items arrive" , it keeps syncing every 10 to 15 minutes!!
any ideas?
Click to expand...
Click to collapse
I believe this is due to the heartbeat, mine seems to do the same thing....
thanks Carnivor,
but Im still confused, Direct push is enabled on my device (its yellow) and "as item arrives" is checked also, yet it keeps on syncying every 10 or 15 minutes!!
I thought it will only sync whenever I really have mail, if it keeps syncing every 10 minutes I will probably not use it because of the extreme high cost of GPRS
Sorry for the novice question but what is heartbeat!!
simx said:
Sorry for the novice question but what is heartbeat!!
Click to expand...
Click to collapse
a heartbeat is something the exchange server sends to your phone to make sure its still connected and everything is ok, what you are seeing is not a sync its just letting you know when the last heartbeat saw recieved. I think if anyone knows different please let me know
ahh i see what you mean now, im sure i saw on the 4smartphone site that its 5mb/month data tarriff required, one could assume this is 24/7 heartbeat monitoring without the actual cost of transfering emails, that will be added ontop of the initial 5mb. its a theory
I am currently using WM6 and am trying to get EMail through our Exchange server setup; however, my Dash s620 will not properly save the server's address.
The address for our OWA is (ex) mail.email.com:8888/exchange
and this address works fine in Internet Explorer etc, but when I enter this into the phone it removes the /exchange and only saves up to :8888, which then gives me "Error synchronizing" when trying to connect. Our Exchange server does have Exchange ActiveSync enabled along with Direct Push enabled.
Any ideas?
Thanks in advance
I think that you have to check your ActiveSync settings on Exchange. I know that Microsoft have a lot of KB's about that.
It does the same thing on mine, erases exchange, but mine is cool. Are you sure you are putting in the Domain?
jt76542 said:
It does the same thing on mine, erases exchange, but mine is cool. Are you sure you are putting in the Domain?
Click to expand...
Click to collapse
Yeah I've tried every which way I could think of for the login credentials.
I'll sift through some more MS articles tomorrow afternoon, see if I can't find anything... baffled though, really.
K this is going to be a huge PITA I can tell.
I adjusted the Virtual Directory for the default web site in Exchange System manager to point directly to /exchange, eliminating the need for anything after the :8888. It works fine in IE etc, quickly brings up a login prompt. Using the phone's IE and going to the http://mail.email.com:8888 works fine, prompts a login accordingly...
I configured a coworkers Blackberry to use our OWA and it works fine, but I'm not sure if it uses Push Email (Exchange ActiveSync).
What is it about the Dash that won't mesh? The server is not using SSL so I couldn't see it being a certificate issue (maybe it still is?). Is there anyone around who manages an Exchange Server and could perhaps shed some light on common settings that need to be adjusted for Exchange ActiveSync?
Such a nuisance
ActiveSync on the phone reports "The server could not be reached. Please verify the server name." Support code: 0x80072EE7
It reports back with this no matter how I enter the address (which again, works fine in IE). Devil phone
8888 is definetly not standard for publishing ActiveSync.
the software will connect to either MailServer:80 if the SSL checkbox is cleared or MailServer:443 if the checkbox is checked.
don't think you'll get ActiveSync connect to something else.
Why don't you change your port back to 80?
you are already exposing your server to internet without any form of protection (no SSL so your password can be sniffed over the network) and having port 8888 buys you nothing in terms of security since any port scanner will report the port as opened and eventually get the HTTP banner from the IIS Server.
So, get back to a standard config and you'll love your DASH again.
UM
I have had my TP2 for a few days now and i love it, except for the fact that I cannot send or receive email from my gmail account
I can access the internet fine, and use the youtube app fine, but whenever i try to send an email or hit send/receive i get this error message
"CANNOT CONNECT WITH CURRENT CONNECTIONS SETTINGS. TO CHANGE YOUR SETTINGS, TAP SETTINGS"
When i set up the email the only things i was required to supply were my email address and password....so i am assuming the problem lies with the way my handset is trying to access the gmail account, ie. trying to use wifi or something? (i dont have wifi, so i will only be using the "unlimited" interent provided with my t-mobile UK tariff)
has anyone else had this problem or do they know how to get around it as i have finally got myself a decent handset where i can (allegedly!) check my email on the move, but yet i somehow cant get it working?!!
Ihave tried both hard and soft resets to get this sorted but it just wont work and i feel like pulling my hair out!
n
I know it's not much consolation but it just worked for me...
I have a SIM free TP2 and UK T-Mobile Web'n'Walk.
Incoming mail server is imap.gmail.com
Account type is IMAP4
Username is my full gmail username
Outgoing mail server is smtp.gmail.com
outgoing server requires authentication is ticked
All this was set via automatic configuration.
Hope this helps,
Richard
This is what i have done to recieve and send Gmail trueout the standard email client on my Pro II.
First of all you have to enable imap at your gmail account which you can find under settings.
Then on your phone do the following settings.
- make an new account in your email client
- fill in your gmail adress
- fill in your name
- fill at incomming mail "imap.gmail" and account type "imap"
- fill in your account name (gmail adress) and password
- fill at outgoing mail server smtp.gmail.com
and those two checkboxes must be checked
- auto recieve and send is up to you
hope this will help you
ther's a known bug in windows mobile poutlook...
sometimes the autoconf for gmail doesn't work...(i had the same issue on my omnia)
you only need to enter the account details by hand..
to do that, in the first screen where your address is asked, enter [email protected]
leave it without the final m.
after that fill in manually all the account details, then when finished edit the account and put that m in the domain...
that should work...at least in my omnia was the only way to get gmail working...
I used this guide en it works perfectly
http://mail.google.com/support/bin/answer.py?answer=78886
hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!
quasar99 said:
hi, thanks or all the replies, most appreciated.
however, i have now established that i can get my gmail account working - but only over wifi!?!? when the wireless router is turned off i get the same message as before, so there must be a setting or something that is telling my TP2 to look for a wireless connection when performing a send/receive, rather than using the "internet" (if thats the right term) that is included in my contract..AAAARGH...
i have had a look but cannot find any settings for this so i must be going mad?
can anyone shed any light on this for me before i go mad??!!
Click to expand...
Click to collapse
Disable proxyserver, don't have the place where you can find this. I have a dutch rom
I have a gmail imap connection on my HTC Touch that was working great but has failed to connect for the past two hours or so.
I found that to change from Download 30 Days to 7 days and it worked fine.
Oddly I returned my TP2, and switched back to my VarioV, same problem (had worked fine until then). New TP2 is now here, so will start with 7 days and try expanding to 30 days later.
chillaxx said:
Disable proxyserver, don't have the place where you can find this. I have a dutch rom
Click to expand...
Click to collapse
does anyone know how to do this? i cannot find this option anywhere?
is there any way i can see how my tp2 is trying to receive data from my gmail account, ie. if it is trying to use internet or wifi?!?
also, does anyone have any details for the settings that their tp2 (on t-mobile UK) is using when trying to retrieve email (not by wifi)??!
i'm also assuming that t-mobile wont be able to help me as i got my phone/contract via a third party and t-mobile themselves dont seem to stock the phone themselves....
I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone
nlhall said:
I had this problem, it drove me nuts until I worked out what it was, if i was already connected it would work but it would not establish its own new connection.
To fix it go into the email settings for the account, then select:
Edit Account Setup
Next
Next
Next
Next (Outgoing (SMTP) mail server screen)
Click the “Advanced Server Settings” Link
In the “Network connections” it defaults to “The Internet” but if you have gone through the “Connection Setup Wizard” when you first installed your SIM it renames the connection, in my case to “T-Mobile Internet”.
Change “Network Connections” to the correct one i.e. “T-Mobile Internet”
hey presto, you can now get your emails
hope this helps everyone
Click to expand...
Click to collapse
if the connection has a proxy in the setup, than you can use that connection only if selected like above...
if you leave "The internet" the proxy settings are ignored...you have to select the exact connection..but this will prevent the gmail to connect with wifi
Hey Folks,
I've tried looking and I couldn't find anything.
I received my Tilt 2 a few days ago and set up my Outlook Email.
Everything worked fine and my Inbox and Calander tied up to my work server.
The problem is when I receive a new email...the phone doesn't receive it. I have to actually hit "SEND/RECEIVE" to get the new emails...they are pushed through!
I've checked everything and copied the settings from my previous WM phone. I have the schedule set to "As items come".
Any help?
Thank you much!
Open your Wireless Manager and make sure Microsoft Direct Push is turned on?
I am also having a problem with outlook syncing and notifications. I previously used a Tilt and then a Fuze and one of the things that I like the best was that outlook email would arrive and I would get notified quicker than on my PC.
With the Tilt2 it takes a long time to get the notification (envelope on top) and the email itself unless I send/receive.
Push is turned on all other settings are correct. My next step will be to hard reset and try again.
Has anyone else run into this issue?
Change your messaging options for your Outlook email.
Go to email box....click "Menu" then select "Option"
Then select the email account, then edit account setup.
Continue to press "Next" until you reach the "Automatic Send/Receive"
Make your changes as needed.
I have my Tilt 2 setup every 5 minutes and downloads today's messages only.
I hope this help....
That works fine for regular email accounts. I have that setup for my other email accounts. Outlook uses push mail through activesync and it should be immediate. Unfortunately something has made this stop working.
I am assuming that you have selected option under schedule "as items arrive".
If so, then you might want to look at your server to make sure that is it not the problem.
If not there, you might try deleting and reinstalling the outlook active sync account on your phone.
If that does not work, you might have to resort to a hard reset.
Good luck.
I'm having trouble getting Push Email working in Jelly Bean 4.1.1 without Auto Sync on.
With ICS (and all previous versions of Android 2.2 and 2.3) I was able to still have my emails pushed to the phone without having Auto Sync enabled. For some reason it own't work in JB.
I don't want to have Auto Sync as i try to turn as much off as i can to save battery life.
Has anyone heard of something being changed on JB to not allow Push to work without Auto Sync.
Thanks in advance for any info provided.
I initially had the same problem. Here's what worked for me, no guarantee it will work for you. When setting up my account I cleared the default port setting and just left it blank. Then my work server set the proper number.
Been having the same issue.
Now trying your potential solution and will see.
Update:
This does, oddly, seem to have worked.
Re-Update:
Nope. Back to non-functioning.
furryfrog said:
Been having the same issue.
Now trying your potential solution and will see.
Update:
This does, oddly, seem to have worked.
Click to expand...
Click to collapse
Seconded.
This worked. The battery on my Nexus S was drained in 5 hours of stand-by yesterday and the battery usage was 70% Exchange. Checked my work email via the pc and I had about 50 emails that didn't get to my phone.
Found this thread, went to my exchange settings and removed the "0" from the port setting, clicked save and voila, emails rolling in fine.
There is no way to make it work!!!
:crying::crying::crying:
I am desperated. A couple of days after installing JB 4.1.1 the automatic official update from Google, the Exchange email account suddenly gave up working. After deleting and recreating several times the account the email still could not be synchronized. I configure everything in automatic option but it does not work. I delete the port number and leave it blank but it does not work.
I always get the same error inside the Exchange application with emails previously synchronized, that the application cannot connect to the server but the server is up and running and the configuration is correct. When I delete the accound and recreate once more again and open Exchange app it remains long long time waiting for sync, but it never syncs.
Sometimes when trying to tweak the configuration I get the system message that the account is not found.
It drives me crazy. After trying everything explained above several times I finally succeed to synchronize by activating the general sync button in the main desktop applet (the one for Energy saving which has GPS, WiFi, screen light level, Sync and Bluetooth) and waiting for the system to ask me for reactivating the Security - Device Manager options to allow the security policy specified by the email server.
Do I have to set always the general sync button on?. It will drain the battery, won't it?. Why suddenly it looses the connection and I have to make all this mess to recoup the connection to Exchange server and sync again my corporate email?
josimal said:
:crying::crying::crying:
I am desperated. A couple of days after installing JB 4.1.1 the automatic official update from Google, the Exchange email account suddenly gave up working. After deleting and recreating several times the account the email still could not be synchronized. I configure everything in automatic option but it does not work. I delete the port number and leave it blank but it does not work.
I always get the same error inside the Exchange application with emails previously synchronized, that the application cannot connect to the server but the server is up and running and the configuration is correct. When I delete the accound and recreate once more again and open Exchange app it remains long long time waiting for sync, but it never syncs.
Sometimes when trying to tweak the configuration I get the system message that the account is not found.
It drives me crazy. After trying everything explained above several times I finally succeed to synchronize by activating the general sync button in the main desktop applet (the one for Energy saving which has GPS, WiFi, screen light level, Sync and Bluetooth) and waiting for the system to ask me for reactivating the Security - Device Manager options to allow the security policy specified by the email server.
Do I have to set always the general sync button on?. It will drain the battery, won't it?. Why suddenly it looses the connection and I have to make all this mess to recoup the connection to Exchange server and sync again my corporate email?
Click to expand...
Click to collapse
I have done the same with no luck either.
I currently have the trial version of Touchdown installed to use for syncing in the meantime, but that's not what I want.
Yes, the sync button will drain battery, and I have gotten Exchange to work with that turned on. I want my simple push email to always function regardless of the system background data sync being on or off - like it used to.
furryfrog said:
I have done the same with no luck either.
I currently have the trial version of Touchdown installed to use for syncing in the meantime, but that's not what I want.
Yes, the sync button will drain battery, and I have gotten Exchange to work with that turned on. I want my simple push email to always function regardless of the system background data sync being on or off - like it used to.
Click to expand...
Click to collapse
By now it's still working fine. Let's cross fingers. But always with Sync button on. My conclusion is that also we must be careful with the device manager option the security settings. It allows Exchange to access system security settings. If not, the system perhaps blocks the synchronization. Battery does not look to drain much faster than before with Sync button off.
Exchange Email on Jelly Bean 4.1.1 - Waiting for Sync forever
today I got my new galaxy nexus phone with JB 4.1.1 and I am facing the same issue as mentioned by other members. I have tried the following and none of them have worked so far
I am able to connect to my exchange server but its the "waiting for sync" that's not working
1 - removing and recreating my corporate email account more than once
2 - removed the PORT and let the app set it for me didn't work
3 - went to settings and did sync from there for my account didnt work
4 - enabled auto sync and that didn't work
I'm not sure everyone is understanding the proper use of Syncing. Basically yes your account has to have Sync on. The other option is only the Method it will use. For example if you choose "Automatic (Push)" that just means that when your work server gets an email it will push it to your phone (i.e. your phone doesnt check at all... it waits for communication from the server which is the best battery saving sync option). So if you turn Sync completely off your phone will no longer receive the push emails (you can turn sync off on all other accounts).
Removing the port will likely not do anything. It will either just use the default (443) or not use one and it wont work at all. As an example I have a hotmail calendar that I share with my girlfriend (we keep our social stuff in it). When I create the account I choose not to sync anything but the calendar and set it to "Automatic (Push)". This means that my phone should almost never use battery on that account until one of us adds something to it.
If it worked in ICS it was likely a bug that was fixed in JB. When you turn Sync off it means no syncing will happen at all (push or otherwise)
My problem with exchange is.
Setting up configuration = all ok
Server verifies = all ok
But my company requires a security verification through pin. In ICS it automatically made that security option available.
In JB I'm stuck in exchange setup (name, signature, ...)
Synchronizing loop
(send from Nexus S JRO03E)
Email Security settings issue
sheepz said:
My problem with exchange is.
Setting up configuration = all ok
Server verifies = all ok
But my company requires a security verification through pin. In ICS it automatically made that security option available.
In JB I'm stuck in exchange setup (name, signature, ...)
Synchronizing loop
(send from Nexus S JRO03E)
Click to expand...
Click to collapse
Same issue here.. It just doesnt show the menu to activate PIN and the email doesnt sync... Need help!!!
Can you not just go ahead and set a PIN before trying to Sync? If its already there the phone wont ask you to do it
any fix for this Jelly Bean bug? It just waiting for the sync.
I use 3 separate exchange accounts and dont have this bug at all. I'm not even really sure what it is. Each time I add my Exchange account right after I click "Activate" I get a little notification that says I need to update my security and I put in my PIN and away I go
I had the same error because of limited internal storage. This is what happened:
1. After update to the new OS, all the apps automatically downloaded and installed on the internal storage.
Note: You may want to check your internal storage first to make sure that you have the same issue [Settings->System Settings->Storage].
2. Sometime after that my email stopped syncing.
3. I did reboots and add/delete many time, but still got the "waiting to sync" message.
What worked !
1. Settings -> Manage apps ->Downloaded (scroll left).
2. Click on individual apps and then click "Move to USB storage".
Once space was freed on the internal storage, everything started working.
---------- Post added at 01:34 PM ---------- Previous post was at 01:28 PM ----------
chkamran said:
I had the same error because of limited internal storage. This is what happened:
1. After update to the new OS, all the apps automatically downloaded and installed on the internal storage.
Note: You may want to check your internal storage first to make sure that you have the same issue [Settings->System Settings->Storage].
2. Sometime after that my email stopped syncing.
3. I did reboots and add/delete many time, but still got the "waiting to sync" message.
What worked !
1. Settings -> Manage apps ->Downloaded (scroll left).
2. Click on individual apps and then click "Move to USB storage".
Once space was freed on the internal storage, everything started working.
Click to expand...
Click to collapse
Note: I did reset the phone before the update which resulted in the automatic download and install.
raghav12 said:
Same issue here.. It just doesnt show the menu to activate PIN and the email doesnt sync... Need help!!!
Click to expand...
Click to collapse
Nexus S runnning 4.1.1 stock
This worked for me:
remove port in the incomming server setting
set update to "push"
enable the SYNC button
I used to manualy sync, whenever i needed to access my cooperate mail.
Good luck!
I've tried the stock exchange email app a few times and found it to be overall fairly good. however until I can have the inbox show mail from all folders then it's useless as a mobile email client. I cant be going into each folder (I have 30ish separate email folders with rules on exchange that automatically puts mail from x client into x folder)
I this something that can be done or am I missing a trick. also having to go into each folder and set it's sync options individually is a bind. I'd really love to use the stock client as it looks and behaves far better than (touchdown) but without a unified inbox from all the email folders it's a no no.
Other than that the exchange client works perfectly for me on 4.1.1 (AOKP)
Hi all.
Same issue as others and bk13 After the JB update, Exchange stopped working, as well as Hotmail connection.
I can get the set up done like another here, it is confirmed, but gets stuck at Waiting for Sync endless circle. It is set up to automatic (push) and sync email.
I tried the leave port blank, and it filled in with the 443 default port.
Please help.
I can't get the hotmail to work either, and I see from other forums, it is an issue. what a pain.
Found this on another forum and it work for me. I will see if it will let me set up my Hotmail account now.
It worked for my Hotmail account also. I had to go back and re-check the Auto Data Sync but it worked. Finally, back to normal...
I've found a solution here. Credit goes to Keith Hurst.
JellyBean 4.1.1 Sync | AVForums.com - UK Onlineolution:
Settings --> Data Usage --> Menu --> and check Auto Sync Data
Try setting up Exchange account again and you'll see the prompt to activate a Device Administrator this time.
Thanks,
no connection
when I add my exchange account with the correct settings I do not get a connection?
when I use the same credentials on a Samsung Galaxy SII or SIII instead of my own Samsung Galaxy Nexus it works fine???
I'm Runing JB (4.1.1) and my @work exchange account version = Exchange 2010 SP2 rollup 4
---------- Post added at 11:23 AM ---------- Previous post was at 11:02 AM ----------
apoc [t.i.m.] said:
when I add my exchange account with the correct settings I do not get a connection?
when I use the same credentials on a Samsung Galaxy SII or SIII instead of my own Samsung Galaxy Nexus it works fine???
I'm Runing JB (4.1.1) and my @work exchange account version = Exchange 2010 SP2 rollup 4
Click to expand...
Click to collapse
used this to fix it:
http://www.nonstop.co.il/kb/view.php?kb=29
(yes you need to be sys.admin or else ask your sys.admin to do so)
Emoze push mail for ICS
sniperIT said:
I'm having trouble getting Push Email working in Jelly Bean 4.1.1 without Auto Sync on.
With ICS (and all previous versions of Android 2.2 and 2.3) I was able to still have my emails pushed to the phone without having Auto Sync enabled. For some reason it own't work in JB.
I don't want to have Auto Sync as i try to turn as much off as i can to save battery life.
Has anyone heard of something being changed on JB to not allow Push to work without Auto Sync.
Thanks in advance for any info provided.
Click to expand...
Click to collapse
I had similar issues with weird behavior of the push and sync and I installed Emoze Push client which gives me the ability to push any type of email ,obviously Exchange and IMAP but even POP3 which is very limited email protocol.
I've done benchmarks with the stock ICS email client and with several third party clients like Touchdown, Moxier, K9 and I find that Emoze has the advantage in almost every aspect.
Push notification is stable and fast ,less than 60 sec.
Battery consumption is low ,I’m able to work in push mode without charging for 22 hours.
I’m quite a heavy email user so it was kind of a surprise to me because I used to have 6-8 hours max with only one account working in push.
I have 5 email accounts which is about 100-200 email per day so no kidding ,this one really improved my life ,I’m less paranoid about my battery.
Other features which are quit useful are the security options that allows you to find the device location by SMS or email
and also to remote wipe or block by SMS.
This is cool because you don’t need PC connected to the internet to get the job done ,you can simply send SMS to your phone number to activate the security process.