I installed the cab file "BA_WM5_Voice_Dialer_2" (from efjay) in the windows folder of my 700w, and if I go into the windows folder and tap the app, the prompt shows up, and works perfectly. However, I can't get my bluetooth headset to activate the sddialer app. Any suggestions? Is there a way to set what pressing the button on the headset does via the registry?
I searched for this on this site, but found nada, so if there is an existing thread, i apologize, and please let me know wher 'tis. Thanks!
[/b]
Has anyone sucessfully installed MS Voice Command 1.5 with the New ROM (Jasjar ROM 1.30.68 WWE, Radio 1.09.00, extROM 1.30.153)? It installs but when I run it I get an error message and it disables itself. Any suggestions?
Thanks,
Sven
I have VC working fine with the new ROM - installed and worked just the same as before, so does the reg hack to enable operation via BT headset...........maybe if you try it again (re-install?) it will work
works fine on mine.
@sbatxda I had the same issue, VC would just close itself...what worked was a simple soft reset, I only figured this out after pulling out all my nose hair but hey it's never to late to learn Just do a soft reset an it should work as normal.
sorry, i assumed a soft reset was a foregone obvious solution and would be done automatically by anybody that has any knowledge of any microsoft system.
if in doubt, reset
youmeus: it worked ok on the new ROM then? I'll try to upgrade soon I guess then..
V
MS Voice Command 1.5
Thanks for the suggestions. I have made the register modification to get it to work with my BT headset and I have made multiple soft resets. I have some issue with the Voice Command install in that I have to first install the 1.0 version and then the 1.5 version; if I go directly to 1.5 the install tells me that there is no previous version and stops. This may create some issue, but this is also how I did it with the previous ROM version. I'll try a re-install again.
Regard,
Sven
@vijay555, yes I tried it again and it works ok now...but this new rom has a few issues that I am not comfortable with so I am going back to old rom once I get home later
@sbatxda, the better way to install VC is vis the cab file...just look for the cab file on your desktop eg C:\Program Files\activesyne\voice command\...etc and drag the cab to your PPC.
MS Voice Command 1.5 installation
Thanks youmeus,
Installing the .cab worked better.
I'm now having difficulties installing the .cab file with my ISP settings. It will not install on my device or storage card. This worked fine with the old ROM.
Ideas anyone?
Regards,
Sven
BT hack reg
@adesonic
installed and worked just the same as before, so does the reg hack to enable operation via BT headset...
Click to expand...
Click to collapse
please tell me the issue about this or send a link in a thread. VC 1.5 doesn't work with my BT headset.
DTR - try this - copied from another thread on here
MS Voice Command activation from BT headset
Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too.
regs
sonic
@adesonic
oh, thatone I shure did try. But, having a Magician, I obviously had no success.
Maybe the fault is with the i-tech headset, which probably doesn't support connection.
I also had no luck with streaming audio to that headset, which some posts in other threads say is possible.
Thanx neverteless for your fast reply.
regards
Why haven't MS upgraded this software to a proper WM5 version yet?
OR have they and I haven't been paying attention?
Question: Earlier I and others have had problems with showing of contacts displaying a blank page.. Are you guys able to show contacts using Voice Command properly?
@eman, you have to add one the files form the VGA hack in your windows folder for VC to display contacts...I can't remember the name of the file so do a search on the board!
Great to know there's a solution.
Installing VC now
with the previous ROM there was the issue where it didn't work in laptop mode with the lid closed. Does VC work in that mode now, or are you guys using it in portrait mode?
It would be great if it did.
the file needed is outres.96.dll
no VC doesnt work when the clam is closed.
even on the latest release.
Hi
Anyone knows what is the registry hack that is needed to change the Internet Explorer version of the TyTN (which is normally the version for a pocket pc or a mobile device and that can allows only the navigation on pages that are maded only for ppc)? I've read it months ago but I can't find again the thread..
so anyone??
cabi.costa said:
Hi
Anyone knows what is the registry hack that is needed to change the Internet Explorer version of the TyTN (which is normally the version for a pocket pc or a mobile device and that can allows only the navigation on pages that are maded only for ppc)? I've read it months ago but I can't find again the thread..
Click to expand...
Click to collapse
1) Open a registry editor
2) Go to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\User Agent\
3) Change the default value to "Mozilla/4.0".
4) Change the "Version" value to "MSIE 6.0".
5) Change the "Platform" value to "Windows NT 5.0".
6) Soft-reset.
hello all. i have a question, if you can help me. i have igo 2006 plus, which is workinf very well. how can i put on registry (not on startup folder) to start igo.exe when i power on my device (each time that i power on my device)? please, if someone knows.
I have entered a key under registry, but is not working: HKLM\Software\Microsoft\Windows\CurrentVersion\Run
with key Igo with value "\windows\igo.exe" where igo.exe represents the shortcut that i've copied in windows folder.
Anyone got a working version of Microsoft Voice Command for Diamond? Mine doesnt seem to work.
got 1.6 and its working. i get an error during installation, but error message doesn´t matter...
1) Install Microsoft voice command on your internal device you will have a error after setup but dont care about it..
2) go to INTERNAL DEVICE/program files/Voice command
and copy the voicecommand exe file.
3) go to My device/windows/starting menu/program/ ( its the folders where you have all youre programs shortcuts)
And PAST the VOICECOMMAND shortcut
4) go to setting choice buttons and set for buttons 1 your microsoft voice command application ( choice it in the list)
msvc seems to work properly at first, but it doesn't accept commands and i can't hear anything, just the short beep beep and the small microphone
slikr said:
Anyone got a working version of Microsoft Voice Command for Diamond? Mine doesnt seem to work.
Click to expand...
Click to collapse
Search the Diamond Forum, Monty Burns has posted a fix.
jentech said:
Search the Diamond Forum, Monty Burns has posted a fix.
Click to expand...
Click to collapse
i need this for german version
fearomoon said:
msvc seems to work properly at first, but it doesn't accept commands and i can't hear anything, just the short beep beep and the small microphone
Click to expand...
Click to collapse
yes, after installation that seem to work proprely when you press the button 1 you can see the microphone icon. but that doesnt work i know!!!!
just follow the 4 steps man!!! and that will work perfectly!!!!
(in fact, you need to create a manuel shortcut in programs folders without that, mvc dont work really...)
just follow my instruction in my fist post....
1) Install Microsoft voice command on your internal device you will have a error after setup but dont care about it..
2) go to INTERNAL DEVICE/program files/Voice command
and copy the voicecommand exe file.
3) go to My device/windows/starting menu/program/ ( its the folders where you have all youre programs shortcuts)
And PAST the VOICECOMMAND shortcut
4) go to setting choice buttons and set for buttons 1 your microsoft voice command application ( choice it in the list)