Tom Tom 5.2 - MDA III, XDA III, PDA2k, 9090 General

Currently I am using a XDA2S supplied by O2 although have a similar issue with an XDA2i. The issue is using a gps receiver and tom tom open I can browse sats no issues as soon as I click to navigate tom tom shuts down. No issues with this software on a XDA2 only the i & s. Im am using a bluetooth GPS receiver on the i a serial GPS receiver. My rom is 1.4.00 WWE radio version 1.12.00 ExtRom 1.40.242 WWE. Any ideas on this issue?

Related

T_Mobile MDA III, TomTom 3.03 and Bluetooth headset problems

Hi,
I have problems connecting to my bt headset since I have installed TomTom3. I am running the build3500 bluetooth stack from the 1.06.02 FRA radio. It was working fine without even losing connection with the mda, but after I installed tomtom, it can pair, but cannot connect. The weird thing is that I can sync using bluetooth. I suspect tomtom is keeping busy some of the bt com ports? i noticed that during installation, it required to close bluetooth (cause it said the file BtcoreIf.dll was in use) and as soon as I did that, it finished installation, but since then the headset stopped working. Anyone has similar problems??
Thanks in advance for any input.
Update
Managed to sort it out by upgrading my BT stack to 1.0.0.3900. Still cannot find any similar complaints in any forums. Can it just happen to my MDA III? Who knows....at least it works now, even if my engineering background is not happy with it :shock:
Upgrading the bluetooth stack
Hi,
I have exactly the same problem as you had, although I'm on the UK network Vodafone and have an XDA2s.
My current radio version is 1.06.02 but I can't fine what version my bluetooth stack is. How do I upgrade to 1.0.0.3900?
Thanks in advance for any assistance you can provide.
Hi,
I am using Qtek9090 with TomTom 3.07 and Jabra BT800 headset and have not the problems you people talk about here. I have to mention that I immediately updated my BT version from 2400 to 3900 the same day I purchased the whole stuff. I was - when I was in the shop - told that TomTom 3.07 can sometimes cause problems due to BT version of Qtek (1.0.0.2400) and I better upgrade it to 3500 and/or 3900. I was also told that there were known problems with earlier versions of TomTom wireless (like in your case TomTom 3.03) and that I (at least) had to use TT 3.07 and/or better upgrade the BT driver of my Qtek9090. In order to find your current BT version:
- Click on Bluetooth icon
- Select Bluetooth Settings
- Go to [About] tab
- And there you see your own Build
- You can also select [Advanced] button in [About] for more details
Anyway, once being at home and taking my device out of package I did a BT upgrade to 1.0.0.3900 right away and so far I have no issue with BT stack. Even Jabra BT800 which a lot people complain about works fine with my Qtek9090 (OK, I admit the CallerID at Jabra still not working but I already expected that).
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
tomtom gps
The problem is that tomtom is messing around a bit with bluetooth for bt gps receivers.
So after installing tomtom allways reinstall the latest bt drivers.
AFAIK you should always use TTN 3.07 (GPS and Navigator) on SE and Phone Edition devices (Blue Angels is both WM2003SE and Phone Edition)
Big Fat TY
I was getting stupid before reading this 3d.
Even went back to the shop with the motorola headset and had them show me it was working....
Tom Tom was the reason.
Avareh said:
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
Click to expand...
Click to collapse
This link is not working at the moment, is there another link for this, i am running an xdaIIs and installed navigator3 and could bond but not connect to my bt headset.
will try the stack upgrade also a link fopr nav3 3.07 would be handy too...
cheers.
all sorted now, have got the files and fixed the issue.

tom tom and BT car kit not working with pda2k

hi
if i instal bt gps tom tom my i-mate pda2k can`t connect to nokia car kit, but without tom tom navigator car kit conection is fine
rom 1.22.00 wwe
radio 1.12.00
bt 1.0.0 build 3500
Try deselecting 'Recieve all incoming beams' under 'Settings;Connections;Beam'.
tom tom
i trided but didn't worked
i installed different software gpsinf and it worked fine
BT gps and nokia hands free
What vs of TT are you running if vs3 roll back the GPS driver to vs 2.06, alternativly some people have had luck using TT vs3,07 I tried various vs3 settings and never got it to work the headset will pair and connect but when TT vs3 is loaded the headset will pair but fails to connect - I use TT vs5 which works but not with BT GPS and Headset tried it and it worked until you treminated call and at that point you lost GPS - so I went wired for GPS and all is fine. Mike
tom tom v3
my tom tom v3
i would upgrade to v3.07 after my holidy
Give it a try but the only way I got the XDAIIs to do what I needed was to ditch the BT GPS and go with wired, combined with BT headset - had no problem sinse then

Generic BT GPS & TomTom 5

I have just bought a Generic BlueTooth GPS for use with TomTom 5. I successfully paired the GPS with the XDA IIs, then the problem came of getting tomtom to find it. It will not see it as a Bluetooth GPS so I have to select "Other Cable NMEA GPS", set the baud rate to 38400 and set it to COM 6.
This will work for approx 40mins before TomTom5 crashes. It then takes a soft reboot to get it working again.
Is anyone else having similar problems?
I might have to go back to TomTom3.
My device info:
ROM Version: 1.40.00 WWE (i-mate ROM)
Radio Version: 1.12.00
ExtROM Version: 1.40.176 WWE
Well after struggling with TomTom 5 for the last time, I'm going back to TomTom 3. I believe there is a patch out there to get the TomTom 5 maps to work with 3.
I use my pda2k with tomtom 5.1 and both the Tomtom 3 bluetooth gps and a BT-338 Globalsat GPS Bluetooth Receiver .
In order to get it to work, I have to switch on bluetooth and connect to the gps manually, and then start Tomtom. Occaisonally the gps wont connect or Tomtom just wont detect the gps. I then to a soft reset, try again and it works.
I have not had to do anything clever with the Tomtom settings, in fact I think I just use the Tomtom bluetooth setting for both receivers.
If someone phones me whilst using Tomtom, after the call, tomtom does not detect the gps and I have to quit and restart.
Well I'm back on TomTom 3 now, it's lovely and stable, the BT connect first time everytime and I can make/accept calls on my BT headset.
Perfect!
If only the boys at TomTom had put some effort in and tested 5 before releasing it.
Hello Porkspeare,
can you tell me which version of TomTom 3 you are using and what bluetooth stack? I have the problem that I cannot use my BT headset Bluetrek G2 after installing TomTom 3.01 , even though before the TomTom install it works fine. Would be interesting to know what combination works on your machine.
Thanks
ROM Version: 1.40.00 WWE (i-mate ROM)
BlueTooth Version: 1.0.0 Build 3900
TomTom Version: 3.03 (427)
BT Headset Ver: Blue Trek G2
Hope this helps.
Vavavoom, are you using the very latest bluetooth driver from tomtom for version 3..
tomtom 5 hangs
I have same problem...
The problem goes away if you turn off all POIs
some say copying poi.dat from tomtom3 maps will solve it..
also seen something about a vga registry hack, havent tried any - i have just turned off poi until some solution pops up...
Jan
Hi cruising-thru,
I don't know what you mean by "bluetooth driver for TomTom3" - can you get a seperate update for just the bluetooth driver? The only update I found was for the Navigator (3.07) and GPS (3.07). Unfortunately I can only install the GPS update. If I try to install a Navigator update higher than 3.01 TomTom tells me it cannot find a map even though it's installed and activated. My current combination is therefore Navigator 3.01 and GPS 3.07.
If there is a sperate BT update could you please tell me where to find it?
Thanx
Thanx porkspeare,
I have the same combination except I only managed to install TomTom up to version 3.01. Maybe if I somehow manage to update to 3.03 it solves my problem. Will keep trying
Cheers

GPS software compatible with XDA exec

Hi,
Does anyone know of any GPS software which works on the XDA exec (windows mobile 5) and BT338 GPS without problems. Tomtom and navigon don't work without a lot of messing round. Just after a solution which can offer navigation perhaps with voice.
Regards
GPS Software for EXEC
Hi - I use an SPV M5000 (Orange) and an MDA 3 - Destinator PN works a treat on both - there is a reg edit for the EXEC to enable WM5 GPS. Hope this helps
yes, i have managed to install Destinator 3 and Destinator PN on both JASJAR and JAMin (WM5) without any problems....

TomTom & AX3L_OS_v3.1.2_LITE_fixed

Hello,
I am wondering if AX3L_OS_v3.1.2_LITE_fixed.rar is a GPS enabled rom. I cannot seem to connect using TomTom version 6.010. If it matters, my radio version is 1.50.08.11 and I am in the US.
TomTom Settings :
GPS receiver : Other NMEA Receiver
baud rate : 9600
GPS to com9
Thank you in advance!
Palermitano said:
Hello,
I am wondering if AX3L_OS_v3.1.2_LITE_fixed.rar is a GPS enabled rom. I cannot seem to connect using TomTom version 6.010. If it matters, my radio version is 1.50.08.11 and I am in the US.
TomTom Settings :
GPS receiver : Other NMEA Receiver
baud rate : 9600
GPS to com9
Thank you in advance!
Click to expand...
Click to collapse
But why don't ask this in the AX3L ROM Thread???
Don't you think AX3L will help you better?
Oh Yea it works!
Palermitano
AX3L 's AX3L_OS_v3.1.2_LITE_fixed.rar works the GPS great! I have less than 50% memory usage before kicking off the TomTom 6. It's been the fasted operation I have seen on the Trinity.
I'm using the TomTom 6 from HTC and maps from everywhere. It's a lot more stable than WM5 and I'm seeing a lot less memory card corruption. (4gig SD from TopRam)
What you might try is VITO Navigator II v1.3 to trouble shoot the problem. This little app can auto find the GPS module in the Trinity and give a display of all viewable sat's in about 5 seconds. There is no enable or disable needed, that app will turn on the gps and start working. It can even show you the raw data stream coming down.
TomTom has too much over head to trouble shoot with.
Been playing with GPS units for 8 years now, Palm3 to Sony N70 to HP 5450 and now Trinity.

Categories

Resources