Hi every body,
I was traying to update de radio with MagicianRadio_1.13.00_maupgrade, and now I have a text that says "Serial v.1.2".
What can I do to turn back my phone??
there is any tutorial about it??
Thanks in advance
you stuck in bootloader mode that means that the actual update failed
you should first retry the procedure (kill wcescomm.exe with ctrl-alt-del first, after you may need to restart your pc to use activesync again).
javimetal said:
Hi every body,
I was traying to update de radio with MagicianRadio_1.13.00_maupgrade, and now I have a text that says "Serial v.1.2".
What can I do to turn back my phone??
there is any tutorial about it??
Thanks in advance
Click to expand...
Click to collapse
http://www.todosymbian.com and read the spanish manual to do it.
Related
NEED HELP!!!!
i was trying to upgrade my XDA IIs to
"ba_o2asia_14000_923_11200_ship (1.40.00)",
then, when it comes to the third part "windows ce" it wont continue, then it will stop upgrading to (1%). ived tried everthing like uninstalling and installing the active sync, reboot the pc, changed the regional settings, and made soft and hard reset the unit.......
now all that appears on my screen is "USB, v2.07" and i cant use my Xda.....
and also my device wont connect to my PC/ACTIVE SYNC...
need help PLEASE :x
nikkiman_99 said:
NEED HELP!!!!
i was trying to upgrade my XDA IIs to
"ba_o2asia_14000_923_11200_ship (1.40.00)",
then, when it comes to the third part "windows ce" it wont continue, then it will stop upgrading to (1%). ived tried everthing like uninstalling and installing the active sync, reboot the pc, changed the regional settings, and made soft and hard reset the unit.......
now all that appears on my screen is "USB, v2.07" and i cant use my Xda.....
and also my device wont connect to my PC/ACTIVE SYNC...
need help PLEASE :x
Click to expand...
Click to collapse
re-connet your pc and BA and re-flush again after finish soft reset than you will ok
re-flush
what do you mean by re-flush? is it install the rom again?
THANKS for replying.... Ü
Re: re-flush
nikkiman_99 said:
what do you mean by re-flush? is it install the rom again?
THANKS for replying.... Ü
Click to expand...
Click to collapse
yes, try again ,
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
Hi All,
I bought an italian P3600 WM5, immediately I tried to flash a cooked rom found here in the forum.
So I launched the updating program, clicked next several time, then answered 'YES' to the warning message on the PDA, the program stops on the instant saying:
[ERROR 246] DEVICE NOT RESPONDING
battery is 100%, USB is connected. Don't really know what is the problem. It happens with ALL cooked ROMs in any language
Thanks in advance for your help.
A.
lagigia said:
Hi All,
I bought an italian P3600 WM5, immediately I tried to flash a cooked rom found here in the forum.
So I launched the updating program, clicked next several time, then answered 'YES' to the warning message on the PDA, the program stops on the instant saying:
[ERROR 246] DEVICE NOT RESPONDING
battery is 100%, USB is connected. Don't really know what is the problem. It happens with ALL cooked ROMs in any language
Thanks in advance for your help.
A.
Click to expand...
Click to collapse
I suggest use search function!
Or just read trinityguides:
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
After
[ERROR 246] DEVICE NOT RESPONDING
run upgrade utility again.
Bye
thanks for the prompt answer, sorry for the newbie question
is working now? if not, put your device in bootloader mode (power+camera+reset) then plug in usb cable, and try again. will work.
ady_uaic said:
is working now? if not, put your device in bootloader mode (power+camera+reset) then plug in usb cable, and try again. will work.
Click to expand...
Click to collapse
Hello,
I've a HUGE problem now.
Something goes wrong in the updating process. Now my P3600 is stuck at splash screen.
Completely frozen at the power up!!!
What can I do now ? Can I use (power+camera+reset) in order to retry the ROM update ?
lagigia said:
Hello,
I've a HUGE problem now.
Something goes wrong in the updating process. Now my P3600 is stuck at splash screen.
Completely frozen at the power up!!!
What can I do now ? Can I use (power+camera+reset) in order to retry the ROM update ?
Click to expand...
Click to collapse
Plz watch the instruction on http://trinityguides.info
or use the search function
Trinity stuck in Bootloader, more than one thread....
thanks to all of you!
I saved my Trinity with splxploit
Hi Guys,
I'm a noobie and need help with the orbit.
I tried updating to the orbit_WM6 which I downloaded from rapidshare. It said if the rom update freezes then you stop it by resetting the xda. I did this but now the xda doesn't seem to be going passed the screen where it gives you the information "IPL 3.04.0001 etc". When connected to the laptop it's not picked up by the computer!!
What shall I do? I haven't bricked it have I?
Thanks for the help in advance
Not flashed properly dude...reflash it again...Btw, are u able to invoke your phone to boot loader mode...
earthwind3 said:
Not flashed properly dude...reflash it again...Btw, are u able to invoke your phone to boot loader mode...
Click to expand...
Click to collapse
When I connect it to the computer it doesn't recognise it so how can I reflash it?
I can get to the bootloader.
The information I get on the carrier screen (02 Welcome) is as follows:
IPL 3.04.0001
SPL 3.04.0000
GSM 03.06.90
OS 3.4.0.0
Please can someone give me some step by step instructions?
If I try using start_uspl I get an error 'No device connected' and it says 'Can't spawn "cmd.exe": No such file....'. It fails at line 69 and then completly stops at 81.
Any advice?
earthwind3 said:
Not flashed properly dude...reflash it again...Btw, are u able to invoke your phone to boot loader mode...
Click to expand...
Click to collapse
I've managed to get to the bootloader where it say's 'RUU' in the top right corner. What can I do next guys?
I am trying to flash my PDA with a new ROM, While working with HardSPL everything gonna alright, But during updating Radio or ROM i got a message Error with [ Error 262] unable to communicate, please help me
Error screen short attached
Try to flash when the phone is in bootloader mode
To enable bootloader mode hold volume down when the phone is off
or soft reset then hold volume down,you will see a tri-colour screen,that's normal
then connect to the pc and flash,this should solve
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
xburnsidex said:
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
Click to expand...
Click to collapse
you got HSPL installed, right?
How can watch it, if i got HSPL?
Okay... must install with mtty...
k
****
i´ve got a Brick... damn
how can i start the Ruu in the "tri-color" mode?
I think the RUU need the Active Sync..
Help...........
Problem resolved!
I've not any idea what happened but now i am able to flash my phone with any ROM. If i am not going wrong i think my phone was security restricted to install third party ROM, just HSPL with again and my problem resolved. Thank for support.
hold volume down and softreset! then with usb cable connected run the ruu file