hello boys
my problem is the touchscreen that after hard reset it is not aligned!
aiming crosses the procedure is repeated continuously has some suggestion? thanks
massimo
MDAIII
excused for the translation and my stupid question!
I have resolved the problem
thanks :roll:
Related
Hey Guys,
today i'll need your help! I was just playing with MortButtons and wanted to redirect the mediaplayer-button to one of the mortbuttons. I got that working, but after a softreset, the button goes back to Mediaplayer.
Can you reproduce this? Do you have an idea how to solve this problem?
Thanx in advance!
Bubisch
did you do this procedure through start>settings>personal tab>program buttons??
i changed mine and after a soft reset every now and then, i dont have any problems!!
Thats strange, because i know another guy with this problem. Sounds like hard reset, once more...
hi i have a problemo with my pda2k the down button in the key pad stopped working the rest ok this one is stuck i am thiking of sellin da pda2k for this any help would be greatly apprecaited
I have the exact same problem with my BA. Any suggestions would be greatly appreciated.
u will have to press a bit harder. mine also have this problem.
tried pressing it harder but it wouldn't do anything.
Guys!!
Have you solved problem with down button??
same problem here.. I have this problem a since a few months.. first i pressed it harder but now it doesn't work.. i flashed it again with a new rom, doesn't help I hope there is a solution
On saturday I'll try to disassembly BA again and make some pics of the button board and the tapes. Maybe it will help.
In my case i think the button board ned to be changed and that's what I'm going to do probably next week.
Hello
Suddenly the speaker of my P3300 stopped working .
I can make calls with the "earphones", but not with normal speakers on phone.
Any ideas? PLS
Will Hard Reset on Phone help on this problem?.
I run Touch 3.01 WM6 cook rom.
Thanks!
Always try a hard reset first i guess. Because otherwise you'll have to dig into a jungle of things that can cause this...
Hi every one.
I'm new. and i got a big mistake.
I upload wm6 to my H2200 IPAQ with MultyPort Software, and i lost my ppc.
I have no boot screen, hard reset is not working, bootloader screen also is not loading.
But when i hard reset that, only the bluetooth and charging light it will be off. and that set.
I know this is a very big mistake, but please help me.
Thanks.
Please help me... (
Hi, I'm new to the forum and have only basic skills when it comes to doing hacks and mods. So please be patient.
I recently purchased a second HP HX2795 on ebay that had a cracked screen. I ordered and replaced the screen, charged the battery and booted it up. The first issue I encountered was that it is a spanish language version. I looked through my other HX and could'nt find a language setting to switch it to English. Searching the internet is what brought me here. I found an old thread explaining how to patch in a new language but I don't really understand how to do it. My second issue occurs shortly after it boots, it stays frozen on the owner information screen and wont do anything else. I was wondering if it could possibly be an issue with the new screen connection so I pulled it apart and made sure everything was secure. No luck. Is there a way to reset or reflash the unit back to its original factory settings. I did a hard reset several times with no change. Thanks for your time and patience, Brian
I resolved the issue with it being stuck on the owner info screen. Seems my lack of espanol kept me from understanding the instrustions on what it wanted me to do. Now if I can just translate it to english, I'll have another working hx2795 for $3 plus the new screen.
I've been trying to figure this out for days. Can anyone help?