Develop Bugs

Need bluetooth help badly!~

Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls

Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth

thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?

I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power

Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.

I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.

still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.

The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.

there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you

also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.

what about when people call me can i answer with the answer button of the bt headset or no?

It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse

Motorola HT820 bluetooth stereo headset problems.

I've recently acquired one of these headsets and have managed 2 pair it with my O2 XDA II mini. However, i am unable to stream music to the headset but am able to answer calls and make them too. Does anyone know how i could stream music from my phone to my headset?

if you check in the forum for your pda, i believe you will find you have to upgrade your bluetooth software?
then you will find new menu's in the bluetooth settings including audio/audio streaming.
have the headphones, and am very pleased

already have da software
Hey, i already have the software but the thing is nothing appears in the box labelled "default headset" even after i have paired the device with my XDA. And whenever i try 2 stream music, it initially says connecting but eventually the connection fails and the music does not stream to my headset. Does anyone know how i can get the headset to appear in the default headset drop down box?

when you paired the h/set & phone, what choices did you get?

When I turn my headphones on, my handsfree part pairs but my stereo part won't pair automatically, usually. I just connect it manually, but sometimes it won't just connect so I have to disconnect the handsfree part before I connect the stereo part then reconnect the handsfree part. Occassionally, I have to repeat more than once.

Pair it to the device you want stereo from, start the default "Headset" system for normal talking, press the left multifunction to terminate the connection to the "headset" profile, then press the right multifunction button to trigger the "stereo headset" profile to start.
Or, try to force it after pairing and then press the rightmultifunction to accept the connection and have the device bind that call to that function, enabling and disabling the stereo data.
I had to do the first part with my new HP iPAQ hx2495 to get the stereo headset profile going when i installed the headset as both stereo and regular.

I finally got my HT820 working
I have a T-mobile US MDA.
I first upgraded to ROM 2.24 which supports A2DP, which is what the headset uses for sound other than the phone. (When you flash your ROM it intalls all new boot up software so it changes your hard-reset process, and you lose your support.) Then I paired. You should see the services the headset offers, handsfree and stereo. There's also a menu available when you hold-slelect the name of the BT device in the device list that's handy.
I did discover that it is a headset problem if the sound skips out irratically averaging about 20 seconds. There was a bad batch sent out to/from Hong Kong. Motorola is replacing mine, but I had to pay to ship it to them.
Hope this helps!

I don't want to hijack your thread but I don't know where else to turn. I have requested help elswhere on this forum for my problem but I can't seem to get any help.
I have a ht820 and a cingular 8125. I've been able to pair the headset with my phone but, when I try to play a mp3, the voice speed dial comes up, the mp3 plays for about 3 seconds, then the mp3 audio reverts back to the phone.
Do I have to flash to a different rom, do I have to tweak registry settings? I don't really have a clue what I should do. Please help.
Porter
Edit: I've solved my problem. See this thread for my fix.
http://forum.xda-developers.com/viewtopic.php?t=58192&highlight=
Thanks

Actually what it sounds like is the phone is only connecting to the headset for that time under the premise of a voice dial with the headset profile. I think you're lucky enough that you can get it to play for those 3 seconds. I have a Sony Ericcson w810i and I can't even get any audio from it to the headset at all without using the w810i's 3.5mm adapter to the patch cable on the headphones which just looks weird. But you might want to do a search for your model phone like this, "Cingular 8125 Motorola HT820" and see what kinda results you get.

Streaming audio to car stereo via bluetooth?

Hi, I'm a first time poster and I'm on the verge of pulling my hair out.
I have an SPV M600 and have just bought a Pioneer DEH P75BT car stereo because of its bluetooth capabilities.
It has two bluetooth modes: Telephone and BT Audio. After a lot of playing around I have managed to get both modes working together....ish!!!
I've installed the A2DP hack from this site enabling the streaming audio which actually sounds fantastic through the car speakers.
The problem is that to get the BT Audio to work I have to delete and repair the phone with the stereo every time I get in the car. This involves the following actions:
Open Comm Manager
Tap settings
Tap bluetooth settings
Tap devices
Tap and hold the Pioneer BT unit
Tap delete
Tap yes to confirm deletion
Tap new partnership
Wait for scanning to complete
Tap the Pioneer BT unit
Tap next
Enter passkey (four taps)
Tap next
Tap finish
As you can imagine, this process is a real pain in the backside every time I get in the car so my question is this.
Can the above actions be automated in just one command? If so how? (bearing in mind I do not really know how to write scripts)
If someone could even point me in the direction of learning to write a script for this I would be grateful. I have downloaded and installed MortScript but I don't really know what I'm doing with it.
Why when you tap and hold the device doesn't the "set as wireless stereo" command work the same as when the stereo and phone are newly paired? Surely it's the same command.
Any help would be gratefully received.

Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...

JRH said:
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
Click to expand...
Click to collapse
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.

Hello I had the same problem: erase, new, etc.
but i have discovered one thing: you must only change de name in the bt description of your hands free

neomagik said:
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Click to expand...
Click to collapse
I was just about to point this fella in your direction ...
You'd have to do an indefinite loop while checking a registry value to see if your stereo was found. There is a key, i'm sure, for a list of found devices but I don't know where that is. As for detecting your car stereo as the one to pair with; depends on what keys are saved, sounds like it may just be possible.
I'll have a look into this as I'd like to get this stereo also if it can connect & stream automatically

If returning it is still an option, I'd get the Sony Bluetooth Audio headunit. Works great for listening to audio from your phone. It pairs it automatically. I also use Jawbone headset for talking on the phone. It kicks off the stereo and goes to the headset when a call comes in.
The built in mic is in the headunit and in my loud car, its subpar in quality. Whicj is why I use the excellent Jawbone.

I personally own a Peekton 950 car stereo and it works great with my wm5 (a2dp enabled) and my new WM6. the only thing that it does not do is autodiscover and connect the A2DP while it does it for the headset profile.
one other thing I would enjoy is to have the idtag displayed while getting the A2dp but I guess this is not part of the spec.

As I wrote in this topic, I guess the A2DP profile has two way of linking.
1°) The "headset" way : a bluetooth A2DP headset initiates communication to the music player/WM device.
2°) The "passive" way : The speaker just waits for a known bluetooth audio player to connect/link to it.
What surprises me is the fact you need to unpair-repair your device everytime : have you tried what I explain in the previous topic : just go to bluetooth devices , long tap on your spearker's name and choose "use as bluetooth speaker" (may not be exact name of the option since I've a French phone ).
On my phone, this simple (but annoying enough) action connects my phone to my bluetooth speaker (not an in-car one).
Hope this helps
PS : If you find any way to script/automatize the connection or any app more convenient than opeining the bluetooth setting, I'd be very pleased to be informed

This probably wont help the OP's problem, but for the rest, this freeware is brilliant, and can be automated using command line switches to work via mapped keys.
http://www.teksoftco.com/index.php?section=freeware
Surur

Many thanks for this piece of software Susur. I tried it, but I didn't manage to use it to initiate connection to my bluetooth a2dp speaker.
It's a very usefull software when your device is connected to an A2DP speaker/headphone.

There is a DIY option bluetooth headset acting as audio receiver.
http://www.grynx.com/projects/bluetooth-stereo-in-the-car/5/

Lost BT headset

Hello all, maybe someone here can help me. I'm looking for a way to find my bt headset, its jabra jx10. Is there a way to scan for headsets? Thanks in advance for any help.
Thanks for the help all. I found it a week later in my yard and it still works!

The only way to find it by "scanning" for it would be if the headset is still transmitting a bluetooth signal. Even then, the headset would have to do something to indicate its location such as making a sound. There really isn't much you can do if the headset has completely discharged itself.

If it pairs without requiring a pairing mode, walk around trying to 'search for new bluetooth devices'

bluetooth problems with XDA IIi

Please help!
I am having problems with my blue tooth handsfree and my O2 XDA IIi.
The Xda recognises, connects and is paired with the headset and vice versa. However when connected, all I can hear is static through the head set.
I have tried the headset on another phone and it works fine, also have tried friends headsets on XDA and again only static can be heard.
Any advice would be gratefully received!!!

Ah hah! I'm back and a happy bunny!!! Managed to work it out all by my little self. - If you cold reboot the XDAii by holding down the power button at the same time as pressing the reset, when you restore, the handsfree kit works!!!
Probably really simple to some of you high techies out there but I'm proud of me!!!

In fact, what are you doing is hard reboot the PDA and cause all the program run into manufacturer setting and it will cost all your program and setting lost.
I'm facing this issues before. Whereby, all type of bluetooth is not functioning although that able to recognize by PDA. At the same time, when incoming call received, the ringing tone will like inconsistent/jerking.
It's due to database problem .....