USING QTEK9090's WIFI/GPRS TO SHARE CONNECTION WITH A LAPTOP - MDA III, XDA III, PDA2k, 9090 General

Hello there, i hope anybody could help me with this. Hope this is not an idiot question...
I would like to share the GPRS and/or WIFI from my qtek9090 to my personal laptop so i can browse the net using my mobile's connection.
Do i need a special software for this? I do have SYNC Cable and also BT installed and ActiveSync 4.1 properly working.
Thanks in advance.

I would love a soution for this also

commoooooooooooooon
anybody should know this, please post a reply and help us.!!!

ive tryed everything and still cannot share my gprs conn with my laptop...
i have it sync with activesync 4.1, after that i enable bluetooth neightborhood with my device.. and then i tryed with the wireless modem prog en the qtek9090 but there is no sharing on the laptop... i also have enabled the wireless btmodem(DUN) in my laptop ... still no luck, please anyone give me a hand. thanks.

Related

Need help re: internet connection through bluetooth

Newbie here...
can somebody please help in how to use my bluetooth connection so that i could surf the net with my IIs using the bluetooth connection that i have with my PC?.. i use the bluetooth connection through the activesync... but how can surf the net??? Please help...
If u have successfully activesynced your PPC with PC then you can automatically access the internet. I hope this link helps u out.
http://www.geekzone.co.nz/content.asp?contentid=2417
browse other topics in the site to get relevant solution
cheers!!!

Tytn pc-less wired ethernet voip phone ?

Hi there all you genius , any body came across these application, or can be develop ? .How can I make my Tytn a pc-less Skype or SIP phone with out using WIFi or my pc, I just want to connect my Tytn by a USB to Ethernet converter, strait to my network router.Thanks for your help.
Any answers?
Hey guys, I just give you some challenge away from the boring roms ,and I don't have any answers, thanks.
I don't get the point ?!
Why on earth use a cable and be PC dependand as it is allready possible to connect to any SIP through wifi, 3G, ...
fun_key said:
I don't get the point ?!
Why on earth use a cable and be PC dependand as it is allready possible to connect to any SIP through wifi, 3G, ...
Click to expand...
Click to collapse
thanks for the reply , I knew some body will ask about this , the point is not to use WIFI or 3G, because they use massive battery power and also, that extremely annoying bad link or connection ,you can not have a decent conversation yet, trough this wireless media.

Hermes as a Wireless access point???

Hello everyone can anyone tell me of some program which can turn my hermes into a wirless access point , i know there is a program called "WMWifiRouter" but it can only use gprs for internet access and here in our country gprs is still much expensive . I would like to have a program which can use the usb connection from my pc as a internet source .why do i need it?....... because i want to connect my few other devices such as nintendo ds to internet through it .plz plz plz can anyone help. Thanks in advance and one more thing thanks to all the great cheifs here who do wonderfull job for us specially the legendary Schaps, faria and Shamanix.anyways thanks again.
hi,
use WiFi Router.
wfg
starbase64
Thanks alot "starbase64" for replying but i already mention that wifi router is not suitable for me because it only uses gprs for internet connection and i cant afford gprs its way too expensive in our country what i am searching is a program which works like "wifi router " but uses usb connection from the pc(connected to the internet through regular lan card) as internet source not gprs .sorry for my bad english if i am not making my point clears ,thanks anyways.anyone plz help.
erhm, considering the hassle you'd be going through (even if WiFiRouter worked with USB), why dont you just dish out the 10$ USD for a cheap wireless network card for your PC?
Then simply run Ad-Hoc WiFi internet sharing from your PC.
If you're thinking of having MULTIPLE devices connect to the phone like a router, well, that's simply not going to happen. The WiFiRouter software might call itself a "router", but the WiFi adapter in the phone isn't able to handle more than one wifi connection.
If you want PORTABILITY (plug in WiFi an internet cafe PC or public PC or school PC), buy a USB WiFi dongle adapter (maybe 20$ USD)
Sure, it would mean seting up internet sharing every time on a new PC, but then again you wouldnt be assured all public PC got Activesync installed to allow internet sharing via USB from your phone anyway.
OR
have you tried UNCHECKING "Allow Wireless Connection On Device When Connected To The Desktop" in Activesync connection settings (on the PC ) and then using WMWiFiRouter?
Thanks everyone for replying but still i think i am not making my self clear ,I will check about the active sync option .Anyways thanks alot and if some one found such a software plz do inform me here or by my e-mail [email protected]
There is also this new program, ICS, in the Development & Hacking forum. I haven't tested it, but you might want to check it out.
http://forum.xda-developers.com/showthread.php?t=377047
Thank u dgaud007 i will check this out.

Sharing internet over wifi through Activesync?

Hi,
I've got a PC, a laptop with wifi and my Artemis.
Now, I connect to the internet on my PC through cable, and I use Activesync (through USB) to do internet-stuffs on my phone.
But now I'd like to share the internet on the phone through wifi with my laptop?
Is this possible?
I've seen the hack to change the internet sharing "PC connection" from bluetooth to wifi (regedithack Privateinterface), but the "network connection" only shows my GPRS-connection, not Activesync.
How can I change that?
I *assume* I need to change the registry-key for PublicInterface?
But into what do I need to change it?
Or do I need some kind of proxy-software or something?
Nobody has an idea?
help
hey man i'd like to know that too, if you figured it out some way please tell me how to do it, thank you.
i would also like to know.
Me too, but i think its imposible w/o additional software on ppc.
I'd be really glad to hear there's a solution to this too, as I need to use Activesync simultaneously with allowing internet access to my laptop (would save me a few bob on mobile BB when I'm out in the car).
n4p1 said:
Me too, but i think its imposible w/o additional software on ppc.
Click to expand...
Click to collapse
However its done, count me in. Any idea if/where this software can be found.
Regards all,
Simon.

Bluetooth PAN

Hello everybody. I'm not sure this is the right board for my question, so please let me know if i can post it on another board (thanks!).
I just need to build up a PAN (personal area network) over bluetooth, from my star b94m/b943 (android 4.2.1) and my pc (windows xp sp3).
I don't really need to tether; i just need to connect my pc and the phone by bluetooth using an IP network (something like a wifi hotspot without internet connection, but i need to do this over bluetooth because my pc doesn't have a wlan interface).
How can i do this? I searched the forum and it looks like i need to use the "pand" command from emulator; the problem is that my phone doesn't have that binary. Could you please help me? I would really appreciate even just the "pand" executable.
Thank you!
up nobody knows how to solve?

Categories

Resources