Develop Bugs

Voice dialing SW for mapping green (Send button) got it!!!1

is their any SW that can mimic the long green (Send)button so i can assign it to a a voice dialling SW, i have a Nokia BT that don't support voice dialing because its voice dialing don't support anything but the Send button in which in the regular button mapping it only supports changing the few side buttons but not the send/close ones
thanks in advance

ok since i have not got a reply so far i tried something considered intelligent, need some steering though, what i did is i installed phoneplus
Main Idea
1.most of the headset will mimic the short & long send (Green) button press which will activate the cprog.exe dialer right.
2. since i have no idea where is cprog mapped to this button i needed to install phone plus because it will teachme how the mapping done
Theory
1. if i replace the ppcap.exe with voicecommand.exe everywhere in the system then when i psychly press the green button i should get "Voice command is ready" instead of the dialer pad, in this situation of you press on the headset button it should also trigger the Voicecommand.exe instead of cprog.exe or the ppcap.exe
Fact
1. i tried this & it didn't work when i replaced the ppcap.exe with voicecommand.exe ofert renaming the voicecommand to ppcap for the program to think it is the same, it actually went a launched the original dialer
requiments, well i need more people to try steps like those & to stop me if they know a fact i don't.
if their is some kind of a logger (key logger) we can intiate it & press the headset button see what does it do & make it connect to the voice dialing SW

You are a brave man :lol:
What you ask is possible, as you can activate voice command via the button in the Mpx (which is also pocketpc phone edition).
Unfortunately I dont think its easy, but please keep on investigating and tell us of your progress.
surur

i so far managed to get my PPC giving me error messages like the following
1. Cannot open Cprog.exe (Dialer SW)
2. Cannot execute repllog.exe (i have no idea what is it about)
anyways this is a good sign, if i can replace cprog.exe with voicecmd.exe after renaming voicecmd.exe to cprog.exe i think the logic say that it should launch it, & if it does the BT Headset should launch it & if it does! well we got it working the stupid way but this is the begging
PS another though for those who program viruses, can't we program a parasite sw that attaches it self to cprog.exe & everytime its triggered it launches voicecmd.exe
am sorry all my test are on microsoft voice but because it the only full SW i have now

AM ALMOST THERE DUDES BUT I REALLY NEED HELP NOW, i got as far as when i press the button on my nokia bt headset to activate the voice command, though since the head set is not a hands free expectedly i didn't hear from the BT headset i heared it from the phone & ofcourse i had to speak to the phone not the BT HD to get it dialing something, now i know that thei are some SW that or BT stacks that does that, please guid me through
ONE MORE THING CPROG HAS TO BE LOADED which i actually managed to **** in the process so i also need the file cprog.exe to replace my overwritten one, otherwise your phone will not ring nore have signal bars though it will not be swtiched off & if you have the headset you'll hear the ring in it but will not be able to answer the phone, so next 2 steps are
1. Load both files & not only voicecommand or cprog
2. somehow move the voice & the mic to be working from the BT HD & not the phone

Unfortunatley I could not copy the cprog.exe to my desktop PC to send it to you... The system does not let you copy System Files...
You will have to perform a hard reset in order to get the cprog.exe back... Or maybe try to delete the modified cprog.exe and the original should be ready to use after a soft reset...
Besides, as far as I know there are no Hands Free Profile for our devices, not even with Bluetooth patches installed...
Nice try though... :wink:

well since i backup regularly i reseted my device & got a back so thanks but i got the cprog.exe , i think its **** anyways to make the major move & get stuck on something like hands free profile, i still need the cprog.exe as i file as i couldn't get it too, i have to put it on the startup so the phone will work properly then probably assign it somewhere else on the contrary anybody with some knowledge of how to make files.lnk launch multiple programs instead of one or anybody who have some idea about how hands free profile works will be of a great help
PS come on guys if we scratch our heads together we can make it, poeple here made wonders, i guess this is in hand :shock:

handsfree very near
hi, actually i use mobidial to try your idea. when i press green button mobidial will launch. so very easy i just copy everything in microsoft voice command folder and dump it to modial folder and rename voice command.exe as mobiDial.exe. when i press the green button using my headset and yes voice command is activated and function also but it will work for the first time and then the ppc will hang. reset n will work for one time again. anybody? we r very close to handsfree here.

Toggle WiFi On-Off

Hello All,
Any good tip (shortcut/patch/tweak/app) to toggle WiFi On-Off?
Thanx
SiperX

Battery Status - Tray launch

What procedure to follow?
Battery Status...? How?
Could you indicate the path to create a shortcut with traylaunch?
Will the icon on Today actually toggle WiFi on-off?
Thanks,
SiperX

SiperX said:
Battery Status...? How?
Could you indicate the path to create a shortcut with traylaunch?
Will the icon on Today actually toggle WiFi on-off?
Thanks,
SiperX
Click to expand...
Click to collapse
Hey SiperX
Just do the following with BS...
Options -> Tab "TrayLaunch" -> Mark "TrayLaunch" and "Active / Path to program... and you should see Wifi in the list there under, click ok.
And on your Todayscreen you'll see all the apps you've add on the bottom of the screen ;-)

I had an old BS version...
Thanks CoolGadget!
Now with the new version of BS it is all clear...
Despite the new version of BS offers a variety of cool features the actual WiFi toggle on-off is not performed (like for ex. the app " Cicle BT" does for the BT on-off).
Anybody has another tip/patch/app/tweak to actually toggle (activate ~ deactivate) the wireless function?
(I mean: One tap WiFi goes on, the next tap WiFi goes off)
Thanx,
SiperX

Hi SiperX, I use AEButon plus to switch wifi on and off, Button 1 is mapped to it. One press wifi on/off, double press bluetooth on/off. Plus it is great for loads of other cool stuff to make the artemis really easy to navigate one handed. One point though with black&blue v2 I have to first time after a soft reset turn wifi on with com manager but after that initial operation I can then just press button 1 to toggle wifi and bluetooth.

uniqueboy said:
Hi SiperX, I use AEButon plus to switch wifi on and off, Button 1 is mapped to it. One press wifi on/off, double press bluetooth on/off. Plus it is great for loads of other cool stuff to make the artemis really easy to navigate one handed. One point though with black&blue v2 I have to first time after a soft reset turn wifi on with com manager but after that initial operation I can then just press button 1 to toggle wifi and bluetooth.
Click to expand...
Click to collapse
same here. I use AEButon plus to map my hardware buttons. I mapped the comm button to
one press - wireless on/off
two presses - Bluetooth on/off
3 presses - Comm Manager

Thanks to both of you
Guys thanks for the suggestion: That sounds more like the app I was looking for!
I'll try it out and let you know.
Thanks again.
Siperx

Ups,wrong thread, sorry

5 direct questions about TF3D

Dear all,
Have been searching the forums for a couple of days now, but to not much avail. I've got my TP2 configured just nicely with the 1% battery meter, (A)GPS tweaks etc but a few other things I just cannot figure out and hope you can all help me out.
Registry tweaking etc is fine, just so long as I can do what I need to. I'm using an unbranded European GSM TP2 bought just the other day.
1. On the "Quick List" menu; which I get into by holding down the red/end button, I can turn data sessions/flight mode etc on or off, or the vibrate function. How can I change what options are displayed in this menu?
2. How can I activate/achieve in-call recording (there's fragments of this on the board but no real definitive answer I can see).
3. While I use SPB Menu 3.0.1, when I go into the phone dialler, the "Contacts" soft key in the bottom left doesn't work. I think it's because I have TF3D disabled and SPB Menu instead, but can I remap this back to the default, original Microsoft contacts app which I prefer?
4. How can I keep WiFi switched on while the screen is off (seen a couple of apps I think to achieve this, a nice switchable app would be great).
5. How to (on SPB Menu 3.0.1) change the default contacts app away from the built-in SPB contact menu which is awful, and back to the default Microsoft one?
Finally, I share everyone's frustration about the lack of Bluetooth voice dialling. Having mailed HTC and gotten no decent reply back, I'm as annoyed as the next person... but I think the 6.5 ROM release from HTC if/when it appears will fix things up from "reading between the lines" of some of the replies from HTC I received.
Thanks all in advance,
Adam.

adamchap said:
1. On the "Quick List" menu; which I get into by holding down the red/end button, I can turn data sessions/flight mode etc on or off, or the vibrate function. How can I change what options are displayed in this menu?
Click to expand...
Click to collapse
modify "\Windows\Long_End.lnk". let it point to an application that shows something else.
adamchap said:
2. How can I activate/achieve in-call recording (there's fragments of this on the board but no real definitive answer I can see).
Click to expand...
Click to collapse
get ACR from the blackstone "Themes, Applications and Software" forum.
http://forum.xda-developers.com/showthread.php?t=536472&highlight=call+recorder
adamchap said:
4. How can I keep WiFi switched on while the screen is off (seen a couple of apps I think to achieve this, a nice switchable app would be great).
Click to expand...
Click to collapse
by default wifi is on when only the screen is off. if the device is in standby wifi also turns off. to change this set:
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001

Dear all,
mastermarv, thanks for the reply.
You said "modify "\Windows\Long_End.lnk". let it point to an application that shows something else."
-- Any ideas of an application that produces a menu similar to the TP2 Quick List menu, but with different, modifiable options?
Anyone any ideas on questions 3 and 5?
Thanks again everyone for a great community!
Adam.

Hey everyone,
Just in case anyone else searches and sees this, I've got an udpate:
adamchap said:
1. On the "Quick List" menu; which I get into by holding down the red/end button, I can turn data sessions/flight mode etc on or off, or the vibrate function. How can I change what options are displayed in this menu?
Click to expand...
Click to collapse
-- I used AEButton Plus to solve this problem, but thanks for the registry fix elsewhere in this thread.
adamchap said:
2. How can I activate/achieve in-call recording (there's fragments of this on the board but no real definitive answer I can see).
Click to expand...
Click to collapse
-- The Rhodium Advanced Config utility on HTCpedia activated this option easily - and the recorded calls drop beautifully into Note
adamchap said:
3. While I use SPB Menu 3.0.1, when I go into the phone dialler, the "Contacts" soft key in the bottom left doesn't work. I think it's because I have TF3D disabled and SPB Menu instead, but can I remap this back to the default, original Microsoft contacts app which I prefer?
Click to expand...
Click to collapse
-- This was all the fault of SPB Menu 3.0.1. Anyone else having a problem accessing Contacts from the default Dialler or Phone Screen should remove SPB Menu 3.0.1 and go back to version 2.1.5 or keep using TouchFlo instead. There's no word from SPB on their website as to a timescale for a fix on this and it's a total deal breaker for me, not being able to access standard Contacts list/menu or choose mobile/work/home/etc from a contact in that list!
adamchap said:
4. How can I keep WiFi switched on while the screen is off (seen a couple of apps I think to achieve this, a nice switchable app would be great).
Click to expand...
Click to collapse
-- Thanks to mastermarv for this registry fix in this thread. The Rhodium Advanced Config app also does this as an option.
adamchap said:
5. How to (on SPB Menu 3.0.1) change the default contacts app away from the built-in SPB contact menu which is awful, and back to the default Microsoft one?
Click to expand...
Click to collapse
-- See point 3!
Thanks everyone,
Adam.

WM 6.1 is driving me crazy

Hi all,
I've been searching a few hours here, i have not found any working solution for the following problems (occuring since i got a new PDA - Asus P750 running WM6.1) I was using before a P525 with WM5, and so i lost many things :
- how to get back the "Call history" button instead of "Dial" ? I want to get the full call history, and not mixed with the contacts
- how to set by default the numeric pad ? Anytime i press a number on the button, it displays letters instead, like if i had to type a SMS from it
- How to restore the long press on the "#1" to launch the voicemail ? Now it launches the smartdial stupid thing
- Why does a bluetooth headset get inactive when i accept calls by pressing the PDA button instead of the headset one ? I have to do this, otherwise i have no sound on the bluetooth headset
This new way on WM6.1 to use the phone looks a bit strange to me ...
Thank you.

Sounds like your issues are unique to your device/ROM I do not have any of the issues you have described. Perhaps someone who uses your type of device may know better.

it all depends on the dialer you are using. Have you looked at using a PhoneCanvas dialer such as MBO PhoneCanvas?

Thanks, i'll have a look.
By the way, i have another question : before with WM5, i could switch to different profils (sound tone, vibrator, total silence) by using the buttons on the side of the phone. It is not possible anymore. Instead, it selects things on the today page.
Did it disappear with WM6 or do you thing it is only with the Asus P750 ?
Thanks.

Asking in the wrong place -- try posting your questions in the general area.

Lucius Snow said:
Thanks, i'll have a look.
By the way, i have another question : before with WM5, i could switch to different profils (sound tone, vibrator, total silence) by using the buttons on the side of the phone. It is not possible anymore. Instead, it selects things on the today page.
Did it disappear with WM6 or do you thing it is only with the Asus P750 ?
Thanks.
Click to expand...
Click to collapse
In the settings menu, select buttons and see if you have an option for the up/down button on the side of the phone. On my 6.1 Touch Pro2, there isn't this option for that button. So if its there, it probably wasn't from the stock rom.

JimPapp said:
In the settings menu, select buttons and see if you have an option for the up/down button on the side of the phone. On my 6.1 Touch Pro2, there isn't this option for that button. So if its there, it probably wasn't from the stock rom.
Click to expand...
Click to collapse
They don't exist :\ Only one button to customize (for launching applications)
Thanks.

Any clue to set by default the numeric pad ? There's probably one tweak in the registry.

[APP]SVMPowerMgr 2.0 - Power comm. utility

Hello.
This is the "reloaded" of SVMPowerMgr 1.0.
With this app. You can:
- turn off the screen of Your device
- put the device in suspended mode
- soft reset the device
- turn off the device (HTC devs.).
- turn on/off wifi
- turn on/off phone module
- turn on/off bluetooth (make discoverable/invisible)
- switch phone bands Auto-2G-3G
You also can create 7 shortcuts to the program with parameters:
0 - turn off the screen of Your device
1 - put the device in suspended mode
2 - soft reset the device
3 - turn off the device(HTC devs.).
4 - turn on/off phone module
5 - turn on/off wifi
6 - turn on/off bluetooth
somethig like this
[simbols count]#"[path to program]SVM Power Mgr.exe" [parameter]?[path to icon file you want to use],-[icon index]
You can change the images of backrounds button separator and buttons, they will be located in "Images" folder after install. With one restriction: now the buttons are black, so if you change the back of main program, consider this ...
Remarks: To close the main window you must tap anywhere outside the buttons or in space between buttons. Also to close additional windows tap the Close button or empty space of window.
P.S.
On/off bluetooth works well on Microsoft and Broadcom stacks, but discoverable/invisible mode for bluetooth is working just on Microsoft stacks, on broadcom is to be developped
P.S.S.
Supported screen resolutions: QVGA (240x320), Square (240x240), SquareQVGA (320x320), VGA(480x640), Square VGA (480x480), WVGA (480x800)
Regards.

Seems really useful. Gonna try it with powerbutton long press

Looks promising....will give this a whirl...thx

hello and thaks. i am looking for something like this.
happy new year

Looks useful... Gonna try it.
Thanks for sharing.
Best regards

It looks awesome. Will give it atry on my phone.,..

Looks great, thank you very much!

It works but there is no icon on each button on my HD. Using stock ROM

Works great on my Diamond. The only thing that does not work is the 3G and 2G switch, which I assume is because I am on CDMA. Would it be possible to get the button to switch from Ev (3)G to 1x? Good work.

mwalt2 said:
... Would it be possible to get the button to switch from Ev (3)G to 1x? Good work.
Click to expand...
Click to collapse
Hi,
I'll try to find a way for this.
Best regards.

Error
For my device it can do almost all it promises including turning off the gsm but turning it on or switching between 2G/3G does nothing except gives me a dialog box named "Warning!" that containins the sentence
"The Phone status can not be switched."
Also turning the gsm and 3G on/off with HTC comm manager works just fine but as soon the gsm gets turned off by svmpm the HTC one also looses control over the gsm module (including 3G switch). I love your tool but how to get over this case?

I've got a feeling that this app has one of the best forum-replies per downloads ratio. I mean people just use it and don't complain. So great app when mapped to a comfortable hardkey. My issue was rare, so download it!

Hello and thanks for the program. I have instaled in my HD and mapped to one of the home bottom button. I have an spasnish stock ROM 1.56 and the final button doesn´t work and I would want to link it to another application like mylight. How can I make this?
Thanks for this applicatin

Missing icons
The app functions correctly for me, but the icons are missing (the text for each button are present). Anyway to bring the icons back?
Thanks
MEG
HTC HD2

Thanks a lot.
A very useful app for my GPS guided treeking.

works very well, thank you very much!

Example to create a shortcut please
s.virtan said:
You also can create 7 shortcuts to the program with parameters:
0 - turn off the screen of Your device
1 - put the device in suspended mode
2 - soft reset the device
3 - turn off the device(HTC devs.).
4 - turn on/off phone module
5 - turn on/off wifi
6 - turn on/off bluetooth
somethig like this
[simbols count]#"[path to program]SVM Power Mgr.exe" [parameter]?[path to icon file you want to use],-[icon index]
Regards.
Click to expand...
Click to collapse
Dear Virtan, would you please give me an axample to create a shortcut please.
I think I don't know about [symbol count] and [parameter]?...
What should i write (i use resco explorer) when i want to create a shortcut, for suspend for example...
Thank You
EDIT :
It's okay...I found it..i just add number 1 after the shortcut.
For example :
"\Program Files\SVM Power Mgr\SVM Power Mgr.exe" 1
But Still don't know how to change the icon.
PS:
When i use this shortcut as a link to SPB Mobile Shell i found that everytime i wake up the device, the device starting with "something working" logo (circle that quartered and moving). This is not found when i use the SVM Power Mgr usual link (with menu). Any suggestion?