I made a mistake and bought Dopod p100 .. I led to believe that it could be changed to English using the Galaxy rom update utility
(to English). My device (Dopod p100) a CHT deveice and when trying to load English rom, it would fail and reports : "INVALID MODEL ID"
I uploaded to the FTP/upload/Dopod p100 both files: The dumped rom from mydevice (CHT) and the Romupdate utilty.
I really need help to try to recover from my mistake. Could somebody who is familier with patching the uploader can try to patch the ROMUPDTE Utility to ignet model / county etc...)?
Related
I had a problem in updating my kjam
i try to update the kjam it says
"ERROR [294} Invalid Vender ID
This Wpdate Utility Cannot Be Used For Your Pda Please Check Your Update Utilty"
the problem is that the language is diffrent and i dont know which language it is i want it in english so i try to update with the newest version
from imate official site and it not working
is there any way that i can convert it to English Language
is there any English Language Patch For That Please Post It
.::Thanks::.
arifdreamworldera said:
I had a problem in updating my kjam
i try to update the kjam it says
"ERROR [294} Invalid Vender ID
This Wpdate Utility Cannot Be Used For Your Pda Please Check Your Update Utilty"
the problem is that the language is diffrent and i dont know which language it is i want it in english so i try to update with the newest version
from imate official site and it not working
is there any way that i can convert it to English Language
is there any English Language Patch For That Please Post It
.::Thanks::.
Click to expand...
Click to collapse
Hi there,
Have you actually got an I mate k jam? Or is it a variant?
I had a mda vario a variant and got that error initially? But then I used the wizard unlock tool, this abled me to unlock my CID, I was then able to install the kjam official rom upgrade.
I would reccomend you locj your CID, then you will be able to update. There is whole thread on it under the unlock tool thread. About the second age.
i got the i mate k-jam when i soft reset it shows me the i-mate screen
the handset is not locked i am using my sim card
Very strange.
I would try and download the rom again. Also use the cid unlocker just in case.
where do you people get the I mate ROM's?
I have a vario but can't seem to find the ROM.
I've allready SIM unlocked it allready.
can someone PLEASE help me get a ROM?
Pigo
Hi all
I have bought the Neo but had flashed the ROM by mistake to German language how do i rollback it to english ...
I found the mentioned thread but cannt download it
ftp://ftp.xda-developers.com/Prophe...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
(asks for username and PW but doing this also i does not download)
pls help me with some other solution or other thread..
i had downloaded the dopod file also but it gives me Error VENDOR ID does not match ....
Pls reply at earliest
ps.My prophet is G4
I just buy Dopod P100(Chinese), it is very good to use,
but can anyone teach me how to change it to English??
Because when I sync with my outlook(English), may calendar's appiontment are duplicate, one in chinese, and one in english, so I need to change it to English.
Same problem Here
For those whom are about to take the journey..
This PDA, NOT A PHONE is also know as:
- Qtek G100
- I-mate PDA-N
- HTC Galaxy
- (and some more)
Me and most people are realy here to change Rom language, so..
I am currently living in beijing and bought mine here, and if there is a place you can find anything, BJ is the place. Below what i have been able to do so far.
- Found a UK Qtek G100 english rom, but got an invalid ID when trying to flash it (dah).
- Wrote to dopod support (china) who were absolutely useless.
- Wrote to dopod (Hong Kong) who said they only supported devices sold in HK.
- Searched High and low for an english rom, but no luck.
- Went to some of shops and asked it they could flash the thing but no one had the rom.
My option now: got the grab_it prog in an SD, and am going to look for an english dopod P100 here in BJ.
Other options:
- I think you Hex edit some files in WM5 to change the interface language (but not sure).
- CID unlock the thing so it can accept any rom file.(tips on how to do that would be greatly appreciated)
- Find a kind soul who was an HK Dopod, and ask them do to download the rom from the HK site. (Singing up requires device s/n verification)
- Hack the Qtek g100 rom so I could flash the Dopod.(not sure how to do that)
Anyway, if anyone has any other ideas or has been sucessfull in flashing the thing please let me know.
Changing Qtek G100 from Spanish into English
Have you found a solution? Mine is in Spanish. I have the english RUU but I get an error message when I try to flash it. I'll be in Beijing at the end of December.
Arie
Is it possible to flash WM5 CSY to WM5 WWE and upgrade to WM6 WWE?
I can't find WM5 WWE ROM for ASUS 636N. Can you help me please?
Hi, you can just downloading WM6 WWE from official site and patching it
About patch loking at http://forum.xda-developers.com/showthread.php?t=308611&page=14&highlight=636n last topic on this page (140)
Good luck.
my 636N after patching & upgrade work properly (WM5 CSY to WM6 WWE)
Hello!
I have similar problem with my Asus A696..There is already wm6 instaled on the PDA, just the language I need to change..I've downloaded english ROM from ASUS and also found ASUS.UnlogLangID to unlock it for other languages as recommended on one portal, but i can't run the UnlogLangID on it..I've been told I have to find UlnockLangID specially for my A696, but i couldn't find anywhere.. When I try to run UpgradeTool.exe it says : Language not match!
Will this patch help me as well? Or should i do something else?
Many thanks for any reply..
Edit/Delete Message
need orjinal rom english with out INVALID MODEL ID not cook
i have p3300 but it is in French language
i download orjinal wwe English rom bat it have
INVALID MODEL ID
pls help me
i have the same problem with my p3300
-> language now is italian and i want
change a german or english version...
when i tried it (of course with uspl) i get also
the "ERROR [244]: INVALID MODEL ID"...
i searched for a long term through the threads
but didn't find anything (or didn't see it)...
please give "us" a hint to manage this...
See here:
http://forum.xda-developers.com/showthread.php?t=311403
Cheers
Thanks Zecanilis, but I tried this several times...
It's no problem to install any cooked rom but if
I try to flash the original HTC WM (English, German) then
always the same error occur.
Zecanilis said:
See here:
http://forum.xda-developers.com/showthread.php?t=311403
Cheers
Click to expand...
Click to collapse
ok i'm Update SPL (USPL) v.01 to my p3300 bat i can not up date english orijinal rom
cuz ROMUpdateUtility have INVALID MODEL ID
see:
http://forum.xda-developers.com/showpost.php?p=1312211&postcount=9