Related
Hi All,
I can't decide which case to get for my XDA EXEC.
I would like to use it on my belt occasionaly, so one with a belt clip or loop would be preferred.
From your experiences, which case is the best to go for ?
Thanks.
The t-mobile 6315 case is the best I tried until now (my 3rd for the Universal). It is a holster type, as in, you carry it on your belt and take the Universal out to use it.
It is a surprisingly good fit, and it is very easy to take the device out and put it back in, at the same time, it is very safe when it is sitting on your belt.
The guy I bought it from at ebay has 2 left
http://cgi.ebay.com/NEW-HP-iPAQ-OEM...840044486QQcategoryZ15036QQrdZ1QQcmdZViewItem
And it costs you 1/4 of anything else you are going to buy out there.
Doesn't look like he ships to the UK though !
Does size matter?
atekant,
I looked up the dimensions of the iPAQ 6315 and compared them to the JasJar. Here they are:
iPAQ JasJar
118.872 mm 127.7 mm
74.93 mm 81 mm
18.542 mm 25 mm
So based on the demensions posted by HP and imate, the JasJar is larger than the 6315. Since I'm used to seeing demensions in inches/feet, I have no idea if these differences are significant. Do you find that the case is too small? Did you have to modify it? Because if not, I may end up purchasing one from www.casesonline.com, but get a slightly different color combo than the one you found on ebay. Thank you for any help.
This same guy has 52 under a different listing, very quick delivery BTW.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5771486213&category=15036#ebayphotohosting
weather, the fit is perfect, not tight and not loose, the Uni just goes in & out easily, yet the clip is tight on the belt. This is actually near identical to the HP case (larger one) selling for U$49 retail.
weatheryoko
I had the same questions when ordering it, and I was quite sure it would end up being too tight, but it is not tight at all.
The front, back, and the flip cover (with magnetic closure) is leather (I mean fake leather like substance, but not bad). The bottom, and the sides are elastic bands (about 1 inch wide) and have enough give to let the Universal slide in, and at the same time hold it tight enough.
You flip open the top and the case opens like a change purse would so you can slide your fingers in to grab the device.
I have stopped looking for a case for the Universal, that is how happy I am with it.
Thank you both....
Wow, that was a fast reply. Thank you. It sounds like I may the specific case that you bought (with the elastic bands on the side). So I might hold off on buying the one from casesonline. One last question..... Is there a slot to hold SD cards? Thanks again.
Has 2 slots. Go for it, best $12 I ever spent
I got mine yesterday. First when I open it, I felt as it seems it was made from not such a high quality material.
But when I try to use it, I was extremelly happy.
It was indeed made for the Universal! It fits very well, and very comfortable to put in the Universal and take it out. The belt clip is very nice as well. Finally, I reach the point where I can stop hunting for a perfect case for my Universal. I have tried few before: the original case that I modified with a belt clip, the metal case, and a PDA keyboard case. And this one is the best and I'm going to use it with my Universal from this point forward.
I feel upset with imate or HTC though, if they can sell a device with $1000 price, they should be able to include such a perfect case that only cost $5.
I guess this case is just perfectly made for Universal.
Some pictures of this case
Here are some pictures of my Universal case for the benefits of all of you. Like I said, it simply fits the Universal nicely. Look at the bottom cut, this allows you to take out the Universal easily. And I have no more problem with the stylus flying out when pulling the Universal out of the case (the problem with the original Universal case). Best value for the price ($5 plus tax and shipping, around $14) that you can get.
Does it have a belt clip or a belt loop? You missed taking a picture of the back. Please.
Hi,
strange that there is - still - no separate "carrying case" with a holster available for the i-mate JASJAR / Qtek 9000 other than cases offering complete insertion of the device thus being forced also to work with the device inserted.
Good news:
Expansys will be offering one, watch out here
http://www.expansys.com/product.asp?code=125516
Bad news:
It is EUR 53 here in Europe, which is quite a lot :-(
Second: Expansys is not really renowned for keeping the price it announces before availability of product, neither do they keep dates of delivery. (This product was first announced as "available before Christmas", then 23 Dec., then 2 Jan., now 6 Jan. in Europe, which is a public holiday in many countries here...)
Expansys says the manufacturer is "Premier Systems", though Google does not seem to know a manufacturer under this name.
Obviously this is just some fantasy brand producing for Expansys ???
Does anyone know who is producing this case or hides behind "Premier Systems" ?
(Strange enough that none of the big case manufacturers: Covertec, Krusell, ... offers such a case for the device.)
As my last PDA was an iPAQ 4700, for which I purchased the original holster case, I tried it out for my Qtek 9000 (identical with the im-mat JASJAR).
Almost fits perfectly
(Bad: Now my iPAQ, which is still a cute device, however lacking GSM connectivity, is "naked"...)
The 6315 is similar in size to the hx4700 afair, though I never saw the case one guy described here (attached photos a few posts downwards).
Ok, there we go. The back of the case.
Its a belt clip, not a loop. Very comfortable, its not moving around, not too lose, not too tight, just perfect.
Originally I was thinking to buy that XaX case as well, but its too expensive ($50?) and there is an opening on top intended for the headphone, but I dun like it considering if there is a rain drop into it, that's it.
Ok, there we go. The back of the case.
Its a belt clip, not a loop. Very comfortable, its not moving around, not too lose, not too tight, just perfect.
Originally I was thinking to buy that XaX case as well, but its too expensive ($50?) and there is an opening on top intended for the headphone, but I dun like it considering if there is a rain drop into it, that's it.
Thanks very much for the pictures.
Piel Frama - sweet!
my piel frama case just arrived in the mail today - very nice!! it retails for around €60 - or you can buy it brand-new on ebay for €40like i did
here's the link, i'll see if i can attach some pics as well!
http://cgi.ebay.de/Piel-Frama-Leder...841638524QQcategoryZ38994QQrdZ1QQcmdZViewItem
merry christmas
dennis
and here's another picture - this case covers the keyboard (on my old psion a few of the keys were rubbed blank from usage, and i've seen that problem reported on mda III's as well. plus you can leave the device in the case while using all t's features! :lol:
Hi all, does anyone know where to get T-Mobile case in Europe?
Thanks
t-mobile case
@stric
if you are talking about the case that came with the original mda profrom t-mobile, you can have mine, if you cover s&h! let me know if you're interested!
merry christmas
dennis
Hi, no I ment the case for HP 6340 which is being sold on ebay (but only in USA ). Thanks anyway.
Marry christmas and happy new year to all of you
what do you guys think?
I just got one and it fits wicked !
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=9704622961&rd=1&sspagename=STRK:MESE:IT&rd=1
I purchased the same item last month, its branded T Mobile, but a good fit. It has elasticated sides so would probably be suitable for other PDAs, I can also use it for my Sharp Zaurus SL-C760.
You may want to shop around on eBay as I purchased from a US seller for £7.99 including delivery although it took 3 weeks to arrive.
Mike
yeah I realised that these ones were a little more expensive but they are in the UK so easier to trace etc. and plus mines arrived next day, so I was well happy
In North America?
Does anybody know where I can purchase a leather case like this one in North America?
I've been looking for a case for my Universal that is the same as the Qtek case. Not a skin but a belt holster that has a magnetic clip for closing but the Universal slides out completely when taking it out of the leather case -- oriented on your belt horizontally.
Is this what you're looking for?????
http://cgi.ebay.com/NEW-LEATHER-CAS...708156343QQcategoryZ15036QQrdZ1QQcmdZViewItem
This is the one I use for my JasJar. Great carrying case. I purchased mine from this seller (In fact I bought two). Works great. Good seller. JasJar fits right in.
Best deal in my opinion.
Good luck.
Take a look at this company, the Brando cases are considered one of the best cases to buy.
Flip Case
http://shop.brando.com.hk/bwdopod900leathercasef.php
I've bought 4 of my cases over the years from this company, although they are based in Hong Kong I have never had any problems with the service.
The delivery has always been within a week to the UK. I bought the side opening case last week from them and I'm very pleased with the quality
Side Case
http://shop.brando.com.hk/bwdopod900leathercases.php
Hope this helps.
I have to agree about BRANDO. I have bought several cases from them and they have always been very fast at delivery and courteous. Once i had a faulty case and after an email and photo of the problem they immediately replaced it!
Their screen protectors are also amazing, ive been using them on an A920, A925, A1000, SX45 and now my Exec.
The case from the first post is EXACTLY like the case that cme with my HP Ipaq H6340. I used it for a while until i hanged it for a krusell.
If any of you guys want a source and dont trust ebay, try HP.COM and look in accessories for the H6340/6315
Brando end-latch case
Actually, I ordered the Brando case that opens lengthways. It's not too bad, some small alignment issues with the openings in the leather...
I just realized that I like the JasJar without anything attached so I'm looking for cases that it's slides out of completely. Maybe I'll get a silicone skin for it so it's more tactile but after using my Brando case for awhile, I definitely want one that I can remove the JasJar from completely.
I must admit, the Brando case looks nice and feels good other than the alignment issue. Delivery was fast and service was good.
What I'm after is a nice holster style case like this one from Sena. Does anyone know if a JasJar will fit into this case??
Cynic64 said:
What I'm after is a nice holster style case like this one from Sena.
Click to expand...
Click to collapse
You might find the Krusell Horizontic case suitable, but you'll need a PDA Large (code 94108 or 94113) and they're a bit of a dog to get hold of in the UK.
Brando vs Krusell
Yeah, I'm in Canada having real issues finding a distributor that carries the Krusell case.
And why am I looking for the case after buying a Brando?
Because the Brando sucks. After the second plunge to the concrete that my JasJar took because the metal screw holding it to the swivel swivelled right out (!), I've given up on the Brando.
It's crap. Your better to go with another case. Speaking from experience and one scraped up JasJar.
Re: In North America?
Dan Feeny said:
Does anybody know where I can purchase a leather case like this one in North America?
I've been looking for a case for my Universal that is the same as the Qtek case. Not a skin but a belt holster that has a magnetic clip for closing but the Universal slides out completely when taking it out of the leather case -- oriented on your belt horizontally.
Click to expand...
Click to collapse
Check this out. Says they ship to the USA but not sure where they are based. I have this case myself and it is very good.
http://zxpro.com/catalog/product_17...00_Holster_style_Case_Horizontal_cat_681.html
Dave...
the best Ive seen to date is the Piel Frama... expensive, but you get what you pay for ;-)
I've notice a lot of these cases for the universal, the edges are actually expose. You drop your universal and an obvious damage will be visible. The case that came with my Exec was crap, so as the other cases from O2. i have to agree, Piel Frama is the best one i've seen and the price is pretty quite expensive. :?
I have to say, I have a Krussell Leather 'Bikini' model with swivel belt clip which does the job perfectly for me. And I've dropped my M5000 numerous times with no damage even thought there is a lot of exposed casing... only problem is the stylus and SD card shoot out when dropped, I'm on my 4th stylus @ £5 a pop and 3rd 1GB SD (Glad the SD card prices have dropped!)
:shock: here you can find over 15 Cases for the imate JasJar and the XDA EXEC
http://www.imate-shop.com/index.php?currency=USD&cPath=73_86&sort=2a
Belt holster like an i-mate Qtek
But none of the ones listed are like the Qtek's belt holster. Horizontal orientation, magnetic flap, belt clip (not necessarily swivel, in fact prefer not). One that you can slide the whole Universal out and use it free of the leather case.
I bet that something like that combined with the silicone skin would make a great combination.
Anybody know where i can find that type of case in North America?
Dan,
Check http://www.krusell.se
look for generic PDA / "Horizontic" type of case. I had one for my Ipaq 5550 and it's pretty good.
Cheers,
Hal.
Re: Belt holster like an i-mate Qtek
Dan Feeny said:
But none of the ones listed are like the Qtek's belt holster. Horizontal orientation, magnetic flap, belt clip (not necessarily swivel, in fact prefer not). One that you can slide the whole Universal out and use it free of the leather case.
I bet that something like that combined with the silicone skin would make a great combination.
Anybody know where i can find that type of case in North America?
Click to expand...
Click to collapse
I bought one of these in the Far East and it is very good and was cheap too. I found a US website selling it here-
http://zxpro.com/catalog/product_17...00_Holster_style_Case_Horizontal_cat_681.html
I am not a big fan of book style cases so when I found this I was very happy as I much prefer the style where you can remove the PDA to use it and still be able to keep it on your waist.
Dave...
http://www.mobilefun.co.uk/product/12649.htm
and is it any good ?
thx
c.
These leather cases seem ok but the one I have just leaves tiny bits of material all over the Orbit screen....anyone know of a simple pouch for the Orbit?
Don't mean to hijack the thread but anyone have one of these:
http://cgi.ebay.com.au/leather-case...0QQihZ012QQcategoryZ48673QQrdZ1QQcmdZViewItem
Looks to be designed specifically for O2 but I want to know if someone recognises it as a proper Artemis case and not some other model's case that just happens to fit. (ie is it a dedicated P3300 case that will have a perfect fit?)
looks like a generic. problem with sleeve cases is that you need to take the phone out to do anything. so unless its top quality you can get scratches and smears over time.
Just got the PDAair flip case (for my orbit). Its quite nice as it protects the screen and trackball without actually touching either. However it holds the orbit extremely tightly, have to struggle to take it out (although I mostly keep it in).
this looks like the best quality one:
http://www.pielframa.net/pielframa_productos.asp?id=1690
buts it pricey. I'll see how my Pdaair is after a month .....
yarstoft said:
These leather cases seem ok but the one I have just leaves tiny bits of material all over the Orbit screen....anyone know of a simple pouch for the Orbit?
Click to expand...
Click to collapse
im using my 80gb ipod pouch until my case arrives! fits perfectly
Now got the pdair black metal case! its fantastic as the screen is protected.
One problem is you can't get the stylus out if you have an orbit, but a small amount of cutting with a hacksaw should sort that out
I got this case from ebay yesterday, seems very good....
http://cgi.ebay.co.uk/PDAIR-XDA-ORB...hZ002QQcategoryZ48673QQtcZphotoQQcmdZViewItem
It works very well, all functions accessible, is fairly bulky although and wont sit in car holder very well, however i believe a car holder is available which uses the round clip that comes with the case....
Dan
Hi,
I'm looking for a descent protective side carrying case for a TYTN II Kaiser/AT&T Tilt.
Now, the there are lots of cases available in all kinds of shapes and materials but there's one thing that I need badly: a belt LOOP in stead of a belt clip.
I've lost one of my devices already in the city by kneeling down to tie up a shoe and the case slipped off my belt. It was a belt-clip type. Consequence: I live in Belgium and my phone ended up in Morocco. (The bastards even called me to ask me if I wanted to buy it back for a couple of hundred Euro's )
Anyway; don't want to risk the chance to lose one again and therefore this post.
Do you guys can recommend an affordable case (leather or fabric) that protects the phone well and that meets the condition of a belt loop?
TIA
Descent protective case? One that protects it from falling. That would be nice. I don't know of any with belt loops but the Krussel one I have has a spring loaded belt clip that hooks on under the waistband of jeans and is pretty secure. With a belt it might be even better.
http://www.sfplanet.com/product/941...ther_Case__SWide_series_with_Spring_Clip.html
Only $20US (can't convert to Euros on the fly)
Thx Wilhelm. That case looks pretty well but yes, I definetly need that loop instead of a clip.
Not taking any chances anymore
My wife and I both have cases with hoops as well as clips ... available from ... fleabay ..
http://stores.ebay.com/greatdealcenter
Thx for the link albrandwood
There are some sweet deals on that fleabay-store. The only problem is that I live in Belgium (Europe) and they only ship to the US/Canada
Anyway, I got an unbranded case with a belt loop from a colleague at work. One that he never used because he bought another type after he purchased his phone. Once he found out that I was looking for a holster I got to have his case.
Thx once again to all for your input !