im encounter the problem after flashing the rom dopod900cht into exec! now my exec dead at bootloader? anyway to solve ??? thx in advance[/b]
Re-Flash it, get it into bootloader and run the ROM updater again.
A search of the forums would have also given you your answer...
Related
my brother has the one of these o2 exec , but he has somehow reflashed the rom and now is it just a blank screen- is there a way of getting the rom, etc from another o2 exec and reload it to his? I have never done this before and he has had enough of messing around with it and just bought a new m3100, so i was wonderig if I could repair this, if so I have just aquired a new phone for nothing .
Any help will be much apprieciated.
thanks
sam
If you look well the screen an see some word like usb up and v.1.0 down is possible to repair.
Try to reflash the ROM via Bootloader mode.
Hi everyone,
A while ago I was stupid and tried to flash my O2 XDA Orbit without fully reading the instructions and therefore ended up "bricking" the device. It turns on but seems to hang on the "O2 Welcome Screen" which shows the following information:
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
The device can boot up into the bootloader screen no problems and I have tried to install various ROM's from the German O2 WM6 ROM to the UK T-Mobile WM5 ROM but with no success, it just gets to 3% then reboots.
Does anyone know a way that I can restore the original O2 UK WM5 ROM from the bootloader? Or at least get it working again?
At this point there is no O2 Rom avaliable, you will have to wait till they finally release the WM6 Rom sometime this Summer.
Lordao
try this
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
1234567890
No Joy
pvdhelm said:
http://forum.xda-developers.com/showthread.php?t=312495
go to this tread and test it
Click to expand...
Click to collapse
Thank you however I have tried the above instructions but my device just gets to 3% then reboots.
Does anyone know what the MTTY.EXE software is all about and is there any way that I can manually force the device to Flash using this?
Or!!!!!
Is there a way for me to clone a mates xda orbit and drop the image onto mine? Both were purchased at the same time just I thought i'd be clever and update mine which didn't quite work out.
Have you already tried to flash a rom by using your microSD card ?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
try to flash it from sd card if your orbit is cid unlocked
not sure
I dont think my device is cid unlocked as it would have worked with the updated rom install, wouldn't it? sorry pretty new to all this.
I have tried to flash straight from the sd card but it just searches through the sd card then goes straight to the multicoloured bootloader screen.
Anyother ways or is there a better rom that i could use?
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to flash two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 260 connection where activesync disconnect.
Please can someone tell me what to do? What I am doing wrong?
Renta said:
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to install two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 206 connection where activesync dissconnect.
Please can someone tell me what to do? What I am doing wrong?
Click to expand...
Click to collapse
there are lots of posts about this, the best way to fix it seems to be to flash back to the original ROM and then try again.
I really search forum but answers did not help me. I tryed also SD flash but cant start a bootloader-push down voice dial+on/off+reset button and nothing happend.
Ok, I dont have original WM5 ROM on my desktop PC only official WM6. Is it enough to hard reset or just flash back official WM6? Sorry if I ask stupid questions.
Maybe I wasnt clear enough in a first post.. I originaly had WM5 and than I flash official WM6. So, I dont have WM5 ROM anymore. I can only flash back to WM6. I try to flash WM6 and same error apear.. I will try to find on net originaly WM5 and flash it than we will see..
I found original WM5 ENG Rom on the web and try to flash but get same error again! I really dont know what to do anymore.. Tryed SD flash but bootloader didnt start, trying flash back with original WM5 also failed..
Who can help me?? People it is christmas time come on...
Same issue here.
Trying to flash from Artemis Touch 3.01 lite to Full version.
Having problems with Error 260.
It's normally because you are trying to flash with a SDHC card in.
Thanks
Ok, at the time you get the error, I presume your device has gone into Bootloader mode? If yes, then without doing anything to your device, stay in the boot loader screen and try running Rom Update process again. This time it may go through it.
Regards,
Carty..
have you removed your storage card while updating ?
With the new sdhc drivers there could be problems when the storage card is insert into device.... hth
ups....just saw Juice05's answer....i was too late with my answer
Help, I have HSPL, SSPL, and Energy's July 10 rom, and i can't update my rom to the 24 july version because i hang on the multicolored screen... Help guys
HSPL 3.
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.
I'm new on this forum and I really need some help .. I tried to change an t-mobile mda compact III rom (wich it was in german) but ended with an bricked phone (( .. If someone can help me ...please .. The device is not even mine; I was trying to help a friend and now I don't know what to do; I really don't have money to send it to imei-check or anything else. The artemis was in german . the problem ,now : was from t-mobile germany or t-mobile austria ? I really don't know beacause the device is second-hand and i don't have who to ask ..
after deep search I lost all my hope in finding an original WM5 ( I think) rom .. not german and not austrian.
So is there an solutin ? because I'm in big panic ...
Thanks a lot in advance guys !
hello,
took this for the windows mobile 6 thread
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/10...06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
i bricked my phone once over and i was able to fix it by this method, i plugged the phone into the computer and entered bootloader mode and i pressed ctrl/alt/delete and found wcescom or something like that and pressed end task.. i then ran the update and it flashed the phone back to normal. after that i ran the Hard SPL program and unlocked the cid and then flashed with a custom rom..
hope this helps.
.kev.
forgot to mention...
dont know anything about german and austrian rom's so you'll have to do a bit of research if those dont work for you...
sorry!
the links don't work (
thanks a lot .. I will try if I can get the roms ....