Hello i'm in deep sh.... first my pda crashed got this blank screen usb/serial 2.06
i've read most of the forums and been said to reload the OS by using the original cd
But it's damage
any one can post or were to download it.
thnx
Related
hi all ! im very new in this domain ! first here is what i DID : i have this XDA with ver 1.6x (something like that) and i wanted to upgrade to the new version from www.microsoft.com/etc etc...! so i dld it and started to write the new version.The program deleted my old version of windows and started to write the new ver after doing all the checks.But my laptop suddenly got into stand by when the program was writing the new soft at 7%.He said i should unplug then reset and re plug the poket pc! i reset it with my stilus and try to reconnect but now my setup program for upgrading doesn't FIND my XDA II at all....he tells me to connect the poket pc to cable.When the device want's to start i get the screen with O2 and the version down in the right corner but it wont get passt that...that is why probably the soft from my laptop says that i should connect the pda...my pda doesn't BOOT ! right ?...so...now my big question...is there a program that i can use to WRITE windows mobile to my XDA II ?..so that he don't checks the version...he just overwites all data so my xda will work again! hopefully somebody can help me...or maybe is there a program that can delete all from my xda so i can start to write the new version to it ! pls ..smb help me with that ...i need to fix this very quick..if not im a dead person..PS :i forgot to mention,,,..my PDA doesn't belong to me ..so this is why im dead..if i don't get soon a new ver of win to it !...i'll wait for your answer...! so the final question would be...where to find a TOOL that can WRITE my ROM without DETECTING (without active sync-cause this prg doesn't recognize anymore my XDA2) my PDA !...IF someone can help pls write me quick..you can also write me on yahoo: [email protected] ! thx alot guys
you get the upgrade files from www.my-xda.com not from microsoft....
re-do the upgrade dude.... goodluck... check out DCS's thread about upgrading
i upgraded (and switched languages in the process) my girlfriend's iMate 2k2 ( a.k.a. XDA2/MDA2) by flashing with an upgrade from my cellular provider.
the first time, things went wrong and I saw USB and some weird junk on the screen.
panicking, i decide to try it again.
this time it erased everything, and crashed when it came to 15 percent of the writing part.
REALLY spooked, i tried it a third time, and sat in front of the laptop to prevent a screensaver or hard-drive-spindle-down from happening, and the upgrade went smoothly.
it was a boring 45 minutes, occasionally jiggling the mouse to keep the computer alive, but it worked.
so try and try again
Thx All For Help
i've read a post by DCS a after that all went smooths for my noob knowledge ...the 3 button reset hlp me alot cu guys ..and HF!
I was upgrading my XDA2, it said completed, and when i restarted it, the o2 splash screen appears with radio verson 1.17 and thats where it stays... can anyone help. I have tried reinstalling the rom.... but it cant see the pda, and aborts...
Help would be appreciated
Does your device have a bootloader mode? If so get it into, connect usb & start upgrade program. This works on a magician, maybe on yours too?
Regards, M
thank you for the advice, but it is himayalian model.....so i do not know it it has a boot loader.
Read & repair
Hi Smudge,
Take a look at this post & got it from the thread 'stuck in 02 splash screen' at http://forum.xda-developers.com/viewtopic.php?t=25830&highlight=himalaya bootloader 4th post.
RAGOv said:
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset b
utton SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
Click to expand...
Click to collapse
Cheers, M
Dear people,
I need help to upgrade my Medion which has built in Pocket PC 2002 v. 3.0.11171 build 11178 (German version) to PPC 2003 (english version).
I have second medion ppc with same hardware and same part number but with PPC2003 English version.
i Make thousand of searches in this forum, with hope to find thread or post with about the same problem like mine.
What i do to now...
i create a backup from second ppc with OSImageTool.exe and saved to my PC hdd.
I attempt to flash 1-st ppc with active sync using PROGRAMME A.exe but no effect... respond from tool was Cannot execute the remote communication program......
so.. i make another search in this forum and i find many thread with same problem.
i follow this guide but when i hold power button + soft resert button for even 5 minutes my ppc has restarted every 2 seconds, and no boot screen appears..... when i release restart buton, ppc is booting normaly.
i will be grateful if somebody help me... thx for reading this post.
PS: Sorry for my bad english
mam maly problem so small like a little, I wanted to reinstall the rom for HTC Diamond phone and I received only the first step where HSPL I installed and I reset the phone if I do I install properly SSI are not sure and now I turned on Windows Mobile and ciples welcome and there in the translation that should I touch the screen then give me the align screen and there is too cross with which it moves and move them to the sides do not address bo a hundred times and still nothing pls help surne
edit: I managed to turn on Windows Mobile 6.1 without using the touch flo soft reset in a special regime nenacitalo sim but now what?? pls pommooc
Edit 2: I just tried znovaa it connected to your computer that you reinstall rom the instructions and when I started I wrote that my phone is not connected to the USB while the
edit 3: I've tried burn rom mobile and via the special regime but do not even
pls help people seriously
I didn't understood your problem, but try these steps for installing ROm first time : http://forum.xda-developers.com/showthread.php?t=416211
OR http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26
Ok this is what i have done and what has happened.
I've had the n520 for a year now with WM 5, have been reading this and other forums RE upgrading to WM 6 etc. I took the plunge using "greymans" ROM from here xda forums, sorry I am unable to post the link
COLOR="blue"]WM 6.1 CE 5.2.19974 (Build 19974.1.2.8) Eng[/COLOR] The ROM worked fine , I re-installed all my old programs "great" no problems.
Included in the ROM is a program from "NEWPLOW" called tuneup, I was experimenting with the settings when I selected under the GPS tag SIRF 2, the loox requested a reboot which i did.
The loox N520 now rebbots only to the splash creen and no further, ie. the mountain walkers. with a small black line 3 mm wide about 2 cm up from the bottom left hand corner.
I have tried a hard reset and i get to the dolphins with the numbers
1.20.G4
1.20 Displayed.
Have tried connecting to the pc but active synch fails to recognise the device.
Finnaly my question, IS IT BRICKED? Or can it be salvaged.
Any advice gratfully recieved.
Cheers Williamsfan
all sorted
Did you solve this problem (reboots only to the splash screen)? I have the same thing ...
Thanks
David