Hello all, where can I download the original DialPad of Qtek 9090?
I meshed around with the dialpad and it appear uggly now. Please help!
I think the simply way is :
Do an ActiveSync syncronization and backup;
Get off PPC from cradle, do an Hard reset;
Do remember to set a correct data and time;
Put PPC in cradle, connect as Guest;
make a restore;
Get off PPC from cradle, do a Soft reset;
Put PPC in cradle, connect as Your normal user, when AS prompt, choose replace all data on PPC with PC's data.
That's all, I think.
Related
Hi,
I got my new QTek 9090 and created successfully a bluetooth bond for ActiveSync. ActiveSync works fine, but I miss an entry in the menu "Tools" of ActiveSync that lets me connect to my computer.
On my QTek 2020 I got a menu-item that says "Connect via bluetooth...". When I tap that item, my PDA connects to my computers and start to sync. On my QTek 9090 I can't find a similar menu-item!
How can I add this?
Thanks in advance!
Sam
I noticed this too as a difference between the XDA II and the M2000 (or XDA IIs)
They only way I can see to initialise the sync from the phone is to go into the bluetooth manager, tap and hold on the activesync connection (pairing) and select Connect, which kicks off activesync.
Hi,
Anyone got a suggestion to create a kind of a shortcut to this?
Thanks,
Sam
Hi,
I have a problem and maybe somebody can help.
Suddenly I stopped connecting with activesync.
When I connect my BA it automaticaly connects as Guest, but don't allow me to do anything. I cannot explore the BA, install things, syncronize, etc ...
My BA has WM5 and I tryed with AS4 and AS4.1 and both on my desktop and laptop. I have the same problem in both computers.
After I installed WM5 I could syncronise and everything. Just some weeks ago this happened.
BTW, sorry for my english
Thanks in advanced,
PSH
No ideas ???
have you tried deleting all the partnerships in active synch?
Then I would kill active synch process ( wcescomm.exe) and restart active synch and let it discover the phone as if it was the first time it had seen it.
Hopefully it should set up a new partnership (not as a guest) and that should fix it.
Ya. I've done that before with no luck.
More ideas ?
how are u connecting to the device? in the cradle or over BT or Wifi?
In the cradle. Over Wifi is not possible under WM5.
I saw in the foruns somebody saying that he had a similar problem and turned out to be the contacts corrupted, but did not say how he solved it.
I send him a pm, but with no answer.
How can we clear the contacts files ? Only with a hard reset ?
I found this app by Modaco and thought to share it with everyone:
http://www.modaco.com/WM5torage-t238545.html
Enjoy
RE
Have you try it on your Universal? Does it work?
Just tried this on an I-Mate JAMin and it works great. Thanks for posting it, very handy!!
Tried it on a Wizard, works flawlessly! I am in love! Thanks for finding this!
Work fine on HTC Prophet. Some experience would like to share as follow:
1. After you installed the program, soft reset first. If you encounter error message when you run this program first time, soft reset again.
2. During the file transfer process, the PDA cannot read the Memory Card.
3. Don't turn off the PDA power. You need to turn off any power time out setting in the PDA. Otherwise the process will stop.
Works like a charm on my MDA PRO with JASJAR ROM
Works perfect on Himalaya also!
Churchill said:
I found this app by Modaco and thought to share it with everyone:
http://www.modaco.com/WM5torage-t238545.html
Enjoy
Click to expand...
Click to collapse
Thank you it does not work on my dopod 900 i get an USB error.
Can u suggest please cheers
What does it do exactly?
Is it similar to Softick's Card Export 2?
So when installed, active sync via USB won't work anymore?
Is it always ON or is there a way to turn it OFF?
the program acts like a toogle. The first time you call it you can activate it, the second time you can deactivate it.
Wolfgang
I get the following error
"Cant switch to mass storage USB driver, error 1f"
I have installed it to my device, not sd card and have soft reset it before using it.
Could it be that it doesnt support 4GB sd cards? I am using a 4gb transcend card.
I have an M5000
cheers
I was able to read a few more comments from the site, but I want to know your experiences regarding Active Sync and WM5torage switching on your Universals.
Is it possible to delete protected files from the \windows directiry with this software ?
well... i'm experiencing problems after activesync. WM5torage can't seem to initialize just like softick. I have to do a reboot and run WM5torage before activesyncing to make it work. I hope i'm not the only one having this problem... cuz if it is ... i need to do a clean reinstallation.
Jupiiiii
Great Tool !
Made my day.
Works perfectly on the Universal and the Wizard
Cheers
hrb
Nice tool. Save us $20. Here is what I found out with regards to active sync:
1) I had active sync running fine. Turned active sync OFF while still plugged in and turned on WM5torage and activate it. Computer stated "Unable to recognized device". Unplugged my Exec and plugged it back in and computer recognized it immediately as a Local Hard Dirve. Excellent piece of software.
2) I had active sync open in the back ground without being plugged in. Tried plugging it in and the computer failed to recognize my Exec. The small active sync icon on the task bar just moved. I unplugged my device and totally shut active sync application from start>settings>running applications. Plugged my Exec back and active sync connected without any problems.
Conclusions:
1) We need to totally kill active sync from running before it can reconnect without problems after using WM5torage.
2) We still need to unplugged the device if we want to run WM5torage or re-run Active Sync. It would be nice if we can just toggle in and out of it without manually unplugging the Universal.
All in all this is a very handy little application and I am glad it is FREE. What makes it nicer is that it has such a small footprint: 45kb. I did not experienced any errors upon installation. Nice work by the developer.
cktlcmd said:
Nice tool. Save us $20. Here is what I found out with regards to active sync:
1) I had active sync running fine. Turned active sync OFF while still plugged in and turned on WM5torage and activate it. Computer stated "Unable to recognized device". Unplugged my Exec and plugged it back in and computer recognized it immediately as a Local Hard Dirve. Excellent piece of software.
2) I had active sync open in the back ground without being plugged in. Tried plugging it in and the computer failed to recognize my Exec. The small active sync icon on the task bar just moved. I unplugged my device and totally shut active sync application from start>settings>running applications. Plugged my Exec back and active sync connected without any problems.
Conclusions:
1) We need to totally kill active sync from running before it can reconnect without problems after using WM5torage.
2) We still need to unplugged the device if we want to run WM5torage or re-run Active Sync. It would be nice if we can just toggle in and out of it without manually unplugging the Universal.
All in all this is a very handy little application and I am glad it is FREE. What makes it nicer is that it has such a small footprint: 45kb. I did not experienced any errors upon installation. Nice work by the developer.
Click to expand...
Click to collapse
Voila..!! It worked with out USB errors. Cheers, Taurus
It works perfect !!!
Thank you !!
Version 1.3 attached here!
Version 1.3
- added prompt to soft-restart the device after installation
- when storage is attached to USB host, mobile device USB controller and flash disk are ordered to be kept in "Power On" state
- added switch to choose between "Removable" and usual ("Hard Disk") device classes. Will affect how the host OS treats the device - for instance, it will not create System Restore and Recycle Bin if class is Removable.
RE
Wonderful! It works as stated on my QTEK 9000 Universal
With PHM Tray Launch I could put an icon in my bottom task bar
:lol:
Hi,
I've got 2 problems with my orbit.
1. When i put the orbit into the cradle or plug it in via a cable to my computer for the orbit to sync / charge the screen doesnt come on. The orbit is conncted to computer and sync's fine but for some reason the screen has just stopped comming on. If i turn the screen on and then put it in the cradle then its fine. Just annoying really.
2. I cant save any notes that i have created. For example i go into notes, then scribble something press the tick in the right hand corner but nothing happens? I cant get to the screen which asks where to save it and what to call it etc? I have wisbar and pocket breeze installed and both are the latest versions.
Cheers
Ben
Hi Jamin100,
I have the same problem with my Notes.
I see that you also run PocketBreeze... I think this might be the problem...
I will uninstall PocketBreeze and try again
Jamin 100....
I've found the problem: change the save path of your Notes from SD-Card to local memory of your device.
Good luck..
Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance
mauce said:
Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance
Click to expand...
Click to collapse
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.
I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks
maurizio.n said:
I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks
Click to expand...
Click to collapse
Sounds as if all is working . And what ever you were trying on the phone has an adverse effect ? What are these tools that are keepimng you from hard resetting ? I believe there is another program for connecting to this cell let me rack my brains while I think ...
PURESKILLZZZ said:
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.
Click to expand...
Click to collapse
Hi PURESKILLZZZ,
Many thanks for taking you time to read my explanation.
Let me give you some answers:
1.) The reason for me is that in case of a hardreset I need to install all applications again. Actually I've been doing a hard reset and then afterwards restored a backup I created with spb backup. Unfortunately the problem was still there.
2.) Yes the phone charges when connected through USB (so it's not the connector that is faulty I guess).
The device manager I need to checkout didn't lok at that yet.
When I connect using wm5torage I can see the SD card in the explorer.
3.) The phone charges when connected to the charger.
So I guess the answer is yes to all your questions.
If you have more questions to be able to help me please let me know.
I'd like to tackle this problem.
Thanks in advance
I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance
I believe it is safe to say your present software is the issue and have you tried sktools for dong the back up .
maurizio.n said:
I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance
Click to expand...
Click to collapse
Well maybe if we find a solution to first guy yours may work as well...
PURESKILLZZZ said:
Well maybe if we find a solution to first guy yours may work as well...
Click to expand...
Click to collapse
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....
1 other thought ... A simple fix whichh may work . goto comm manager on your phone and click activeSync and see if that helps .
maurizio.n said:
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....
Click to expand...
Click to collapse
Did you jam the charger in the phone at anytime or did the phone drop while connected to charger . Just being connected for long periods of time dont hurt as I have ran my phone for over 24 hours connected to power while playing the radio thru the phone.
Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)
mauce said:
Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)
Click to expand...
Click to collapse
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?
1 last note before I go take a power nap . You can check your activesync setting on the phone . goto => Start > Settings > Connections > USB to PC. Change the mode of the box next to Enable advance Network functionality. click ok .. Now try to connect ... The box is suppose to have a check in it but sometimes there are other reasons why it doesnt worj the defaukt way . I hope I have been of some assistance to you.
Similar issue
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!
JC#79 said:
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!
Click to expand...
Click to collapse
Yeah a backup is a good idea but most dont do that . And yeah some cleaners do remove more than they should.
PURESKILLZZZ said:
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?
Click to expand...
Click to collapse
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...
mauce said:
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...
Click to expand...
Click to collapse
Almost every program you named I have installed various times . And I know from experience quiet a few of them clash . Biggest example is the anton tomov pocket mechanic and PC Counselor Tweaks2k2 .NET. Both of those running with the resco stuff is utter ciaos.
Hell this is complicated...
I have the same problem although my mda compact III (T-Mobile) is pretty new! Would it help to
a) install activesync 4.5 (I currently use 4.2)
b) to debrand it
Hope there is a simple solution... and many thanks in advance for it!!!
I had a similar problem, are you guys using a firewall? if so you may need to open a port or what I do is temporarily deactivate my firewall when I connect my orbit to my pc.
Hope that helps.