Related
I am trying to unlock my new Orange SPV 1000 I have used the new XDAunlock to no avail, I successfully installed the new program on the device, ran it and got the message successfull repair!! However when I tried my vodafone sim, it asked for the unlock code!! I have tried several times with the sim in and without. Does this new program not produce an unlock code?
Ideas anybody?
Rom 1.60.00 wwe
12/03/03
Radio version 1.10.00
protocol version 1337.18
Ext rom 1.60.38
Same XDA II Problem
I have the same result. Just received an Orange M100 (XDAII) in UK at my office. Downloaded updated program, ran fine without any errors. Attempted to install my US T-Mobile SIM... asks for unlock code. The Orange SIM works fine. (When in US, need to use local T-Mobile SIM.)
Update program must need another update unfortunately. (Darn Orange)
Follow-up to previous post...
Forgot device details, apologies.
ROM Image: 1.60.00 WWE
Radio Version 1.10.00
Protocol: 1337.18
ExtROM: 1.60.38
Are you sure it isnt asking for the sim code rather than the phone code? You say you used xdaunlock, you should be using xda2unlock.
Response
I stand corrected... I was using the correct (XDA2UNLOCK) version. I failed to type the correct version in my previous post.
Yes, I'm confident this is not a SIM unlock prompt. It clearly states that this is a Network Provider Unlock prompt.
Thanks.
unlock
i also buyd a spv m1000 in switzerland an want to try a unlock.. so friends please help this man... 8)
Having just tried the lastest version of xda2Unlock, I'm having the same problem.
I copy the xda2unlock program and run it with my ORANGE SIM installed. It says all is fine and tells me to switch flight mode on and off.
I do that then take out the battery and install my Vodafone SIM. The M1000 then starts up showing "MY Info". the signal meter shows an exclamation mark and when I tap the screen it asks me for my normal SIM PIN. I put this in and the next screen says "Service Provider is locked, Please input unlock code" and has a box and an ok button.
If I try any number, including my SIM unlock code, it comes up with a box saying "Invalid Unlock Code" and it says "You have tried -2147467258 times, please wait until timeout..."
ROM version - 1.60.00WWE
ROM date - 12/03/03
Radio version - 1.10.00
Protocol version - 1337.18
ExtROM version - 1.60.38
Model Number of m1000 - PH10A
I hope you can help me as I'd really like to get this voda SIM working in it.
Thanks in advance
---UPDATE---
P.S. - Just W4XY's post in another thread from this morning ....
W4XY said:
Actually this is not completely true. There are two versions for unlocking an XDA 2. Unfortunately named the same (xda2unlock.exe), but they can be found in two separate threads in this subforum. Read the first post carefully. The latest version is: http://forum.xda-developers.com/viewtopic.php?t=6963
The newer version writes a lock 00000000 to the phone and then unlocks it. However, this process is still quite secure. I have had no report of a phone not working due to unlocking. All problems were in the end related to SIM cards not working (old or blocked) or the phone itself being blocked (insurance claim). One problem that still remains is that Orange phones do not seem to unlock (but the phone remains working normally). That is being worked on.
Click to expand...
Click to collapse
Good luck with sorting out the ORANGE phones....
hogansghost said:
Good luck with sorting out the ORANGE phones....
Click to expand...
Click to collapse
In the thread http://forum.xda-developers.com/viewtopic.php?t=6963 a new version of xda2unlock (version 2.2) has been posted that should perform better on Orange phones.
And thanks to me for posting the Orange M1000 ROM to you in the first place )))
Just joking, it works great guys, unlocked my M1000 in a few seconds.
Kev
X01HT from softbank
Hello guys,
I have same problem with the above topics, same with my HERME200 X01HT, I already have network unlocking code, but I can not enter the code, because it says.
"You have tried 35 times, please wait until time out" however, I've been waiting for 6days ago but still can not comes out. I still can not enter the code.
What would be the solution for this????
thanks for your sharings
Jhemzz
Hi!
Well i'm new in this forum. Thanks to the ones who are viewing this.
This is what happened:
I brought 3 Siemens SX56 from the US. 2 locked to AT&T (windows 2002 installed), one locked to T-mobile (windows 2003 installed).
As the bootloader was originally 5.22 for the three of them, I did the typical unlock supplied by XDA DEVELOPERS (replacing the original flash with the XDADEV flash and running xdaunlock.exe)
That worked fine with both AT&T units which are already unlocked.
However the T-mobile one refuses to give me the unlock codes when i open xdaunlock.exe (error getting unlocked codes)
For what i've been reading, this is most likely because win2003 was installed in this one and i heard it's harder to unlock. But that's just what i heard.
Could anyone help me unlocking it?
I really appreciate!
Thanks!
Nicolas.
Ps: you can contact me to [email protected]
:x hi, thanks for xda unlocking software. i can't seem to unlock me xda II. i have the new XDA 2i.
Read:4, ooFF ( o meaning square)
Failed to do magic
search this forum for steps on downgrading ur rom to 2002 or even better is to just load the XDA-Developer rom onto it and it'll unlock it. then after that switch back to your original rom
remember to use xda tools to backup ur original rom on ur computer first!
Reply
Thanks a lot for your response
I already did that. I downloaded the roms from the at&t sx56 and loaded from sd card. The reason i did this is because the xda developers rom wouldn't let me run the upgrade with ppc2003 on it (a usb connection error was displayed)
I installed the 2002 ppc software and after that, i upgraded directly via ActiveSync.
Still i could not get the unlock codes (same error: error getting unlock code).
That's why i need help. Thanks!
interesting havent heard that one before.. have you tried downgrading to another t-mobile 2002 rom and then after that installed xdadev rom? or maybe downgrade the bootloader?
hi
i have same problem as nikoleman
i have a T-mobile pocket pc (i think it is WM2003 beta)
Pw10b1
rom version:4.00.16 ENG T-Mobile
with wallably 5.22 bootloader
i downgrade the bootloader to 5.15 and
the rom to 3.17.03 ENG cooked in kitchen
now infrared is not working and still get error getting unlock code
any help plz
yep
in fact that's the only way it would let me do it.
I backuped rom from the at&t ones and writed it to the t mobile. Then upgraded to XDA DEV special edition and it still throws me the "error getting unlock code" error.
Do you know why might this be?
hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance
Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent
You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.
You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.
my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members
hi
if someone want to know how i successfuly repaired it u can ask me
RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09
RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.
What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx
After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks
I have runed the rom update fromArtemis Windows Mobile 6 NLD (Dutch) with UpgradeRom.bat.
after some time i got a connection error and the divice restarted but now stays in its Loading screen(with the rom information)
what has happend?
and how can i repair it?
can't get a SD flash also, how dou you stay in the SD flash screen mine pops direct to te multicolor screen
Jo, you're also from the Netherlands. You also got the REPPLOG.EXE error? I have the same problem. The device is stuck at the booting screen. you have two options: 1 => send it to HTC or 2 => wait for official Dutch HTC P3300 WM 6 rom update. Oh, btw, it's crucial that you can enter bootloader mode ( voice button + soft reset, and keep holding the voice button all the time ), or else you won't be able to update the device with WM6. If you made any progress please let me know! I'm just gonna wait for HTC....
Good luck
Neozzz said:
Jo, you're also from the Netherlands. You also got the REPPLOG.EXE error? I have the same problem. The device is stuck at the booting screen. you have two options: 1 => send it to HTC or 2 => wait for official Dutch HTC P3300 WM 6 rom update. Oh, btw, it's crucial that you can enter bootloader mode ( voice button + soft reset, and keep holding the voice button all the time ), or else you won't be able to update the device with WM6. If you made any progress please let me know! I'm just gonna wait for HTC....
Good luck
Click to expand...
Click to collapse
i can get in the bootscreen and tried flashing with a SD card but get a certificate issue. I don't know what ROM i must take to get it flashed by SD.
i'm trining to get it flashed back but the SD flash displays every time "Invalid Certificate" tried several NBH files.
also tried a repair form http://forum.xda-developers.com/showthread.php?t=308242
but it saids error 244 invaild model ID
need some help.
same problem twice but easily solved
Neozzz said:
Jo, you're also from the Netherlands. You also got the REPPLOG.EXE error? I have the same problem. The device is stuck at the booting screen. you have two options: 1 => send it to HTC or 2 => wait for official Dutch HTC P3300 WM 6 rom update. Oh, btw, it's crucial that you can enter bootloader mode ( voice button + soft reset, and keep holding the voice button all the time ), or else you won't be able to update the device with WM6. If you made any progress please let me know! I'm just gonna wait for HTC....
Good luck
Click to expand...
Click to collapse
had the same problem twice but easily solved with putting the device in usb mode (record+reset while holding record) and starting the orginal German WM6 install package from O2. Now it's German offcourse but i did installing the Dutch custom rom again (wait about 1 houer, wait only half ouer waas't finishd here!) after loading dutch rom reset with holding the 2 softbuttons, at question press greencall button.
hashname said:
had the same problem twice but easily solved with putting the device in usb mode (record+reset while holding record) and starting the orginal German WM6 install package from O2. Now it's German offcourse but i did installing the Dutch custom rom again (wait about 1 houer, wait only half ouer waas't finishd here!) after loading dutch rom reset with holding the 2 softbuttons, at question press greencall button.
Click to expand...
Click to collapse
But is your device also CID locked?
cid locked
Neozzz said:
But is your device also CID locked?
Click to expand...
Click to collapse
Nevver talked about CID locked device. Mine is't CID locked, don't take that risk for less than 30 euro.
OMG u can update it on CID locked p3300
I bricked my T-Mobile MDA C3 NL trying to upgrade to the wwe version, it actually is CID-locked, so i knew it could go wrong.
My question is if anyone can supply me with the dutch t-mobile rom for this device, i tried flashing it with the german and the uk versions, but it gives me INVALID ID error after a few seconds in the flashing process.
I can get in to the bootloader using the voicekey+reset option.
Anyone who knows a solution to this problem?
As far as I know, there's no Dutch T-Mobile Rom avaible on the internet. I'm afraid that you have to wait untill T-Mobile NL releases a WM6 Rom. Or you could contact the customerservice (or T-Mobile shop) to get it repaired. As long as you didn't CID-unlock your device you still have your guarantee. T-Mobile will fix it for you cost free and pretty quick. I have send my MDA Compact III 2 times already and had it back in 4 days.
Can't wait for that long, so i called my insurance company. will have a temp phone here in under 4 hours.
Let's hope i'll have my CIII back in a few days, think i'll CID unlock it before trying an upgrade this time
lekkere nederlandse thread hiero
I have got my bricked T-Mobile Compact 3 back form repair.
i had CID-unlocked it, had no problem with my guarantee.
now i will wait a week or 2 on the T-mobile germany or maby The Netherlands.
As i have read @ http://forum.xda-developers.com/showthread.php?t=308164
i will juse this methode.
http://www.voipsec.eu/?p=92
still no official T-Mobile Rom.
I've just tried updating my O2 Orbit ROM to Black&Bluev3 and now can't use it on the O2 network. The SIM is working fine at the moment in my old Hermes
everything seemed to have gone fine, (I ran USPL first) but after restarting the phone won't recognise the sim - before I even had a chance to enter the pin 3 times it reported that it required the unlocking code, and then refused to accept the unlocking code once I'd got that.
So now I've got a very sleek PDA, but no phone Any idea where I can get an O2 ROM from as I can't see it listed in the Artemis list, and am I looking for a ROM or extended ROM (what is the difference anyway?)
see the full story at:
http://forum.xda-developers.com/showthread.php?p=1361727#post1361727
strongp said:
I've just tried updating my O2 Orbit ROM to Black&Bluev3 and now can't use it on the O2 network. The SIM is working fine at the moment in my old Hermes
everything seemed to have gone fine, (I ran USPL first) but after restarting the phone won't recognise the sim - before I even had a chance to enter the pin 3 times it reported that it required the unlocking code, and then refused to accept the unlocking code once I'd got that.
So now I've got a very sleek PDA, but no phone Any idea where I can get an O2 ROM from as I can't see it listed in the Artemis list, and am I looking for a ROM or extended ROM (what is the difference anyway?)
see the full story at:
http://forum.xda-developers.com/showthread.php?p=1361727#post1361727
Click to expand...
Click to collapse
it would be the rom mate.
Question as I have O2 orbit too and uk based.
have you tried reflashing phone not forgetting to do the USPL again first.
I had a problem where mine seemed to freeze up when I upgraded one of our and by doing this it worked fine.
worth a try what have you got to loose.
If all else fails they claim that O2 uk are goinmg to release this month but thats a way off.
Try the reinsall. BUT DONT FORGET USPL first
Hmmm.... false alarm methinks - after an hour or so the same unblocking message came up on the vario - I swapped it back and it worked first time in the new ROM imaged Orbit - so it was probably a SIM issue. BTW it seems there are no UK ROM images available for O2...
Yes there are uk o2 roms - see stickies in artemis upgrading and artemis mobile 6 forums.
you've got to laugh - why can't they just release it into tehpublic domain in the first place - it's not like anybody is going to CHOOSE and O2 ROM unless it's for a bet....
Anyway - hats off to step0011 and well done to the community - we win again!