I've been having problmes with my MDA III with the BT, whilst scrolling though the developers site I noticed there was a new ROM available, so I downloaded it and installed it (MDA3_TMUK_v106160_SHIP0307.exe). This seems to have placed the phone on flight mode, and won't allow me to take it off. I can't find the ROM I have prior, so I'm pretty much buggered!
Any ideas would be a HUGE help!
Thanks in advance
Mark
The 1.06 rom is new for t-mobile but not for the rest of us its 1.40.
You need to have a look at wiki, might be able to find your rom.
There is a application called radiostart (some thing like that), which turns the radio on on/off might help you out.
Sorry cant open a new window on pda to find it.
Flight mode
Hey, I've been a long time member here and ran into the same issue with my JAM...I could not find any threads addressing the issue. After trying just about everything I could think of the problem was fixed by turning flight mode on and then off again from the link on the radio icon. Its always the simple fix that you do not think of first. :lol: I think when third party appz turn flight mode on and off it works slightly different. Hope this helps...
I have had O2 XDA II phone upgraded to a O2 XDA Exec phone about 10 days ago and I was eager to open it as soon as I got it. I was happy waith the XDA II and this one looked so much better and it's specifications and capabilities suggestd I was in for a treat.
When I finally got it I tried it out and it was great. I tried it in all three modes and stuck with the Corporate to maximise memory usage)
I tried out and installed various programs eg: Pocket Breeze, and a few games and uninstalled them. A couple of days later my battery icon disappeared. Eventually I had to hard reset my device.
With only Pocket Breeze installed (in Corporate Mode) the video button and the battery Icon disappeared in a few hours.
I called O2 and I explained the issue. I was surprised when they said they would replace it as it waould appear to be a software rather than a hardware issue.
After the call (out of curiousity) I tried a hard reset again and the video button has re-appeared but the batery icon is still missing !!!
Anyone had any issues with this ? Shall I call O2 again ? Any suggestions and Ideas would be most welcome and appreciated.
Thanks in advance.
<'3}}}>>>>><
Hi all,
I upgraded my Orange M3100 to WM6 a couple of days ago - it was a fairly pain free process and I got all my settings etc loaded on within minutes thanks to the community here
However, the one thing that doesn't work is the camera. When I start the app it all loads but the picture isn't right at all - lots of 'static' and diagonal lines so you can't make anything out. Has anyone had this before or have any idea on how to fix?
Not sure what ROM I started from but it I got the phone from Orange about 8/9 months ago. The OS was WM5 with AKU2.
I applied the HTC ROM HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe
I won't go back - WM6 is far better than WM5, but I wouldn't mind getting the camera working too
Any help appreciated!
PsychicMonkey said:
Hi all,
I upgraded my Orange M3100 to WM6 a couple of days ago - it was a fairly pain free process and I got all my settings etc loaded on within minutes thanks to the community here
However, the one thing that doesn't work is the camera. When I start the app it all loads but the picture isn't right at all - lots of 'static' and diagonal lines so you can't make anything out. Has anyone had this before or have any idea on how to fix?
Not sure what ROM I started from but it I got the phone from Orange about 8/9 months ago. The OS was WM5 with AKU2.
I applied the HTC ROM HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe
I won't go back - WM6 is far better than WM5, but I wouldn't mind getting the camera working too
Any help appreciated!
Click to expand...
Click to collapse
In my Trinity happened the same to me. I solved removing the battery for a few minutes.
Excellent - that sorted it!
The simplest solutions are always the best - it's the one thing I never do once the SIM is in!
Many thanks for the help!!
Camera - Picture garbled with static
PsychicMonkey said:
Excellent - that sorted it!
The simplest solutions are always the best - it's the one thing I never do once the SIM is in!
Many thanks for the help!!
Click to expand...
Click to collapse
Perhaps that issue shall be put into a sticky item or as a FAQ item. The very same thing happened when i updated to Shap's 3.54b ROM. I knocked it, did soft resets but it still showed these garbled pictures. After removing the battery for two or so minutes all was restored to normal operation. Very funny but so far no explanation for that behaviour.
Hi,
I finally got my Blackstone since yesterday and am very happy!!! This definitly is the best device I had so far. Everything works great except for 2 problems:
- The program GPSMeter from Mapsware does not work. When I start it for the first time, it hangs in the bootup screen and locks up my Blackstone. Anyone else experiencing this problem?
- When I change the order of my 15 tabs in Manilla, it always hides a few tabs automatically. Which tabs are hidden depends on the order I selected. I am using the Diamond TF3D config tool, or the Advanced Config, both with different results.
If anyone expierences similar problems, or has an idea on what to try out, I'd be very happy with some tips.
Gr
Remko
Hi all,
First I have to say that I'm over the moon with my new TP2!!
I absolutely love it
Today I started customizing it, and I've got one problem.
No matter what task bar I'm installing, after soft reset TF3D won't start.
It just shows HTC, and nothing happens.
At this moment I have the stock Dutch rom that ships with the TP2.
I installed sdkcerts.
Anyone experiencing the same thing??
H.
sorry wrong thread
TF3D
Hi there,
I've had the same issue with my UK spec, a reboot often cures it but it is a bit lame when the software wont even start up.
So far this has only happened to me about 3 times but I have been playing with it immensly and have rebooted it about 20 times already whilst cocking up some Shat Nav software.
Still loving it in general though ;-)
I'm having the same problem, rebooting doesn't solve anything.
A hard reset does, but than I have to reinstall everyting.
Manually starting manila.exe is an option, unfortunately than the time isn't updated.
Anybody has a sollution for this?
My solution was:
1. Go to: Start > Settings > first tab and click on Today > Go to Items Tab.
2. Uncheck TouchFLO 3d and click OK.
3. Do step 1 and 2 agian but then Check TouchFLO 3D.
4. Soft reset.
Done
tried that but it didn't work for me.
Just removed TomTom 7 & SPB Backup and now it seems to start up fine....
That's a bit of a shame, because TomTom and backup are very helpfull apps...
ive had similar issues but only when trying to customise manila theme. kept saying launching touchflo but nothing happens and then reverts to saying tap here to launch manila. if any of the programs you are adding or any of the customisations you are making involve messing with manila then you will have issues! once hard spl is out then all these things wont be an issue any more.
same problem here, don't try to change startmenu things (standaard startmenu/small startmenu, extra rows etc).
If I enable the extra program tab the buttons won't work most of the time.
The stability of the TP2 is not so good yet, hope that there will be a fix or update for it or a very good custom rom from a good chef.
me 2
I have experienced it twice. I got TF running again by unchecking TF3d in the items screen of the today settings, shutting the TP2 down by pressing the on/of switch some seconds, then restarting ,rechecking TF3D and shutting down once more. This has the same effect as a soft reset, only the system is disconnected longer. So perhaps taking the battery out works as well.
I think this problem is there because TF3D is so much integrated in WM 6.1. So the chance of apps interfering with it is pretty big. I hope with WM 6.5, they remove the big menus's (since they are there already in WM 6.5) and other stuff. Just to get more memmory back, and to make TF3D more compatible with other apps. (still waiting for my TP2)
Error no longer happens
Hi Guys,
I found out that mine was being affected by an old copy of IGO 8 that I was trying to install, since I've upgraded to the new version the TF3D issue has completely vanished.
I noticed that when the TF3D failed it was after a period of low memory or high CPU useage, perhaps using some software that isnt compatible with the TP2 is causing TF3D to screw up.
it's just a theory at the mo... can anyone else share their experiences?
Guys,
this is the third thread about this subject. I have the same problem. HTC is not aware about this problem and encourages those who HAVE these issues to call them. Calling is free...
please do so in order to get rid if this massive bug!
I have been doing some investigation of my own on this one.
I have SPB Backup installed which reboots my phone every night and found that TF3D would not start. Even after a few reboots it would not start. Removed it tried again still an issue.
Hard reset and still was getting some issues.
After alot of rebooting etc I found that if you have a pin enabled on your SIM card TF3D has issues on startup.
No PIN and all is fine.
With that in mind I have just left the phone lock on for now until a fix is found for the bug by HTC
hi, please contact HTC with your findings. if they dont know, they cant fix. calling is free.
thought i disabled my PIN and the problem still persists. although i had a "loading..." once. but it didnt load...
I have contacted HTC about this. I am awaiting a reply from them about the issue.
I had the same problem when installing the .cab to remove the bottom curtain. Soft resets, unchecking and checking TouchFlo3D didn't work. I then reinstalled the .cab and the TouchFlo3D also came back.
Perhaps that will work for you too? Try reinstalling the last program after the problems has occured?
I have the same problem, and i did notice that after uninstalling an application it usually works again. The strange this is that it looks like it is not a specific application that I need to uninstall. It could be a cab for a different clock or tab icons or an g-sensor app, or probably any other app.
Strange .....
Hmz, I soft resetted my TP2 and found out that the TF3D again didn't start. Had to re-install the "Bottom Curtain Remover.cab", soft reset and then it started again.
Looks like ahlung has a point in saying that it doesn't look like it's a specific application that needs to be uninstalled / reinstalled.
It can also be affected by file read errors, including files on the SD Card, if you have corrupt files on the SD Card, this can cause TF to not launch and even lock the device.
Cheers,
Beasty
Same problem here!
I also contacted HTC and told them the issue. They suggested me to do a hard reset! If I couldn't think to do it by myself!