Hi,
picked up a shiny new MDA III yesterday afternoon having switched providers - number transfer in progress - so I'm new to both the handset and the provider.
Managed to get the unit hooked up to my home WiFi network pertty simply etc and got the Active Sync sorted etc.... other than the fact the GRPS isn't configured out of the box, I've got a single major bugbear to sort.
That is that I don't seem to be able to get MSN Messenger to connect.
It's exhibiting exactly the same symptoms suggested here.... http://support.microsoft.com/default.aspx?scid=kb;en-us;832515
... but obviously the refers to a previous OS version ?
So, either I have something to fix or unlock in the set-up, the port is blocked on the handset (works fine on my laptop on the same WiFi through the same firewall) ?
Had a search through the forums, but to no avail. Can anyone help me on this ?
Are there any recommended patches/fixes I should have installed straight from the off ?
Thanks in advance !
Matt
OK, just so you you don't think I'm totally clueless, from what I've just been reading in the T-Mobile online manual, I have to have the GPRS connection open to connect to Messenger.
Is this right ? Surely if I have a active WiFi connection is should be able to connect using that, right ? Will it connect via GPRS and then pass it over to WiFi ?
I'll have to check it when I get home to see if I can resolve it in that way.
Any other tips gratefully received !
Matt
I'm using Messenger with a CSD (GSM) connection because it's part of my allowance. Sorry but I haven't tried WiFi yet.
I'm having the same problem.
MSN Messenger works fine using GPRS but fails to login using my Wifi connection.
What's even weirder is that it works ok when docked (ActiveSync)!!!
I'm using MDA III on T-Mobile (UK)
Anyone got any ideas?
I've tried replicating this issue, but on my XDA IIs over WiFi, it connects to messenger no problem... it doesn't even try to initiate a GPRS connection first. I can only assume that the MDA III is configured slightly differently out of the box.
As a thought, you might want to double-check Connection Manager and see which type of connection is set for programs that automatically connect to the internet
Ok, home and finished doing the set-up.
I've found no way of using MSN by any other protocol than GPRS. If you are WiFi atached and attempt to use MSN, then it will drop the WiFi connection and instead pick up GPRS. And obviously you're on for .075p per kb... which might be the real answer in why T-Mobile have set-up the device in this way.
The 'programs that automatically connect to the internet' doesn't seem to allow you to select WiFi as the default connection, only the range of GSM/GPRS options and the 'My Work' one.
Should I use the 'My Work' VPN option and set that up to use WiFi ?
If anyonebody has got any tips on how to set or hack this... seems there are a few of us that might benefit !
Just out of curiosity: if you go into your WiFi manager, have you specifically told the device that the WiFi card in your MDA III connects you to "The Internet"?
I can't recall whether that was the default setting before I set up my wireless network connection on my IIs... it seems like such a no-brainer, but it could assume that your WiFi connection is to a work network etc.
I'm at work and it 's at home.... but I'm adamant that that it knows that the WiFi connection connects to the Intanet. As you say, I think that it is the default setting
However, I will check !
Any other MDA III owners shed any light on this ?
Dear All
I cannot find the original CD, therefore I cannot install the modem drivers onto my WinXP laptop. The modem drivers are necessary to use my PDA (Orange SPV 3100 - Hermes 100) to connect to Internet via UMTS - HSDPA
Can somebody help me by emailing these drivers ([email protected]) or posting here or attaching somewhere on Internet?
Thanks a lot
Saulo
I was told that modem drivers are the same for different brands, I mean Orange SPV M3100, or HTC TyTN / XDA trion / MDA Vario II / VPA Compact III / Dopod CHT 9000 / Dopod 838 Pro
Thanks and please help
Saulo866
You shouldn't need modem drivers if using a WM6 rom. Am I understanding the problem? The Internet sharing app uses a virtual network driver that works much better than the old modem drivers. And if you aren't using WM6, upgrade to it. The Internet sharing piece alone is worth the trouble.
I belief installing Activesync 4.5 should be sufficient.
Dear All
On PDA side I have an Orange SPV M3100 (Hermes 100) with WM 2006 Professional: CE OS 5.2.1413 build 17741.0.2.1
I am not sure whether this is a cooked rom or shipped one. I am inclined to believe it is a cooker WM06 rom
On laptop side I have
- ActiveSync 4.5.0 build 5096: it works greatly
- winXP SP2
Now my question is: WinXP does not see my Hermes as a 3G UMTS or HSDPA modem. Therefore I am unable to use my Hermes to connect to Internet.
My APN is set correctly, on the Hermes side: I called my UMTS-HSDPA operator and set my device accordingly. But the 3G operator also told me to contact HTC or Orange to download the modem driver to make it accessible by my laptop. ActiveSync 4.5 alone does not suffice, since it is only for sync purposes. In other word currently:
- If my laptop is already connected to Internet (e.g. via LAN or WiFi) then my Hermes can ALSO connect to Internet, via ActiveSync 4.5
- Viceversa, if my Hermes establishes a 3G connection, or GPRS connection, my laptop CANNOT use it to access internet.
If you know how to solve this problem I would greatly appreciated.
Thanks
Saulo
i have winxp pro with AS 4.5 ... and all i have to do is turn on internet sharing on my phone, plug in the cable and im done.. the computer will automatically recognize the phone as a network connection.. and i have tried this on a computer without AS and the computer wouldnt recognize the phone, so it appears that activesync is necessary for sharing (it doesnt sync with internet sharing on, but i believe AS has the drivers that are needed)
By the way I have 2 Italian GSM-UMTS-HSDPA operators: Vodafone and Tim
I have tried. I have set correctly their APN settings: (for tim is ibox.tim.it)
While on Hermes side everything seems fine, (for example Pocket Internet Explorer can open web pages) my laptop cannot use Hermes to access internet, even if ActiveSync connections is established and working (hermes synchronized)
Please help
On Phone goto:
Start ~> Programs ~> Internet Sharing
you should have no problems.
saulo866 said:
By the way I have 2 Italian GSM-UMTS-HSDPA operators: Vodafone and Tim
I have tried. I have set correctly their APN settings: (for tim is ibox.tim.it)
While on Hermes side everything seems fine, (for example Pocket Internet Explorer can open web pages) my laptop cannot use Hermes to access internet, even if ActiveSync connections is established and working (hermes synchronized)
Please help
Click to expand...
Click to collapse
on laptop clik activesync icon in the bar and from "setting connections" disable "allow uSB connection"
then do on ppc what Custel abowe wrote
Thanks to all of you!
Following your suggestions now I can connect using my USB link, between Hermes 100 and my laptop, running WinXP.
I did it by first upgrading to Schap WM06 3.3c
Then making the few steps outlined above
My next question is: was anyone succesfull in using Bluetooth, instead of USB link?
I mean, is it possible to access Internet, via Hermes 100 3G-UMTS-HSDPA connection, by connecting laptop and Hermes via Bluetooth?
Thanks again
Saulo866
By the way I noticed that if you use activesync USB link (you do not need to disable USB connection!) that what happens is:
- if you browse internet in your laptop by using Hermes 100 as a UMTS/HSDPA modem the syncing between laptop and Hermes goes down, stops: the device works as a modem but any synchronization stops working. In other words you cannot perform any synchronization (via activesync) or any other operation, like file transfer, while using activesync as a usb-type-link between laptop and Hermes.
Am I right?
Why is that? I mean why cannot I sync my device (or transfer files) and at the same time use my hermes as a 3g-modem for my laptop?
Thanks
Saulo
any clue why this happens? I mean why you cannot sync and browse internet at the same time?
After connecting to the internet via internet sharing, I re-enabled "Allow USB connections" in AS4.5 nut it still wouldn't sync. I guess at the moment we have to be contented with internet sharing w/o being able to sync Hermes and our computer.
A bit OT but has anyone successfully connected to the internet via internet sharing in Vista?
Yes
Yes I have been using Internet Sharing with windows vista successfully. Once it connects there are no problems BUT it doesn always readily connect and often requires a software reset .
I have WM6 Schap's 3.57 on my hermes 300. The internet sharing works great but when I've disconnected my GSM connection while I'm connected to a Wi-Fi network and I try to use "Internet Sharing" I get the message on my phone: "Cannot connect. Ensure that your phone is correctly configured, service is available, and that flight mode is turned off before trying again."
Probably WM thinks I'm in flight mode altough Wi-Fi is connected.
Is there a way around this?
How can you tell if the phone is using the WiFi connection instead of HSPDA/GPRS/EDGE? (Roaming is a bit expensive)
The USB-modem driver worked with WM5. When I start the "Modem Link" program, windows says it found new hardware. I've installed the driver I used with WM5. I tried using it by calling *99# but it didln't work. Should I call a different number with WM6?
Anyone the same problems and/or solutions?
It does work great indeed.. Internet connection sharing..
Except.. when you want to connect to a VPN.
I never had issues with using WM5/Black as modem. But now.. in the HTC Wm6 (official one) only Internet Sharing is left.
Does anyone have a solution for the VPN connection?
Thanks all!
Arnie
saulo866 said:
Thanks to all of you!
Following your suggestions now I can connect using my USB link, between Hermes 100 and my laptop, running WinXP.
I did it by first upgrading to Schap WM06 3.3c
Then making the few steps outlined above
My next question is: was anyone succesfull in using Bluetooth, instead of USB link?
I mean, is it possible to access Internet, via Hermes 100 3G-UMTS-HSDPA connection, by connecting laptop and Hermes via Bluetooth?
Thanks again
Saulo866
Click to expand...
Click to collapse
I have successfully connected to the interrnet via the blutetooth connection.
In your Hermes, select "Bluetooth PAN' instead of USB under the "Internet Sharing" "PC Connection".
In your PC, click on the "Join a Persoonal Area Network" under the bluetooth option and slect your device and you are done.
PS: Your device must be paired first.
I've had the same issue when connecting to my companies VPN, I had to connect to the Tytn via Internet Sharing via Bluetooth to use the VPN.
arnoutboer said:
It does work great indeed.. Internet connection sharing..
Except.. when you want to connect to a VPN.
I never had issues with using WM5/Black as modem. But now.. in the HTC Wm6 (official one) only Internet Sharing is left.
Does anyone have a solution for the VPN connection?
Thanks all!
Arnie
Click to expand...
Click to collapse
Hi,
I just upgraded my Hermes ATT 8525 from WM5 to the following WM6 version which I downloaded off of rapidshare site:
4. WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
Everything is working great, the upgrade was smooth and I was able to get all my data back and all that except for the WIFI connection.
I am able to connect to my Home Wireless Secured Network (SSID), and it shows that it is connected and has almost all the green bars showing excellent signal quality, but when I try to use Messenger or Internet explorer, it doesnt work. I am not sure why? Is it trying to connect using GPRS or cingulars Internet connection? If so, how do I fix it so that It connects using my home wireless connection. I do not subscribe to ATT/Cingulars Internet data plan etc,...
Any help will be greatly appreciated.... thanks
You should read the thread for this rom and ask your question there:
http://forum.xda-developers.com/showthread.php?t=317339
Thank you much! I posted my question under that post.....
Hello all,
Somewhere during my explorative upgrades to different WM6, one of the upgrades changed my radio from 1.15 to 1.18.
Since then I have not been able to connect to the Cingular network with GPRS. It looks like it is able to connect (I get the 1cent charge for logging in), however, it will not access the net.
Does anyone what would cause this?
Thanks
Is there any patch or update that will allow me to connect my TomTom ONE v2 to my Vario 2 running WM6.1 ever since I got the phone the TomTom has refused the connection to the phone due to it not having the correct capabilities. I want to get TomTom traffic updates via my Web and Walk but the Bluetooth doesnt support wireless connection so the TomTom says.