BA GPRS Web Surfing Problem - MDA III, XDA III, PDA2k, 9090 General

My BA running WM2003 used to work fine on US T-Mobile data service. I could browse the web, email, etc...
A couple of months back, I could not connect to a website through Pocket IE. I kinda pushed it aside, figuring it was a temporary problem. I checked again the other day, and still no web access...
This entire time I have been able to retrieve my email fine, and Pocket IE works when connected through a Wi-Fi connection.
Has anyone had this problem w/ the BA before? w/ T-Mobile USA? What did you do to fix it?
Thanks!

Same problem
Hi,
i got the same problem only im trying to use the Dutch T-mobile GPRS service...
I got this problem since upgrading from wm2003 to wm5.

Unfortunatly I cannot attribute mine to a software upgrade. It just stopped working - I have hard reset since then, and it reinstalled my Ext ROM, but I did not put anything in there that should be offensive to IE...
Did you ever resolve your issue?

Anyone able to help me with this, or suggest some places I can look for additional research?

problem GPRS connection in Italy
Also I' ve got the same problem of connection first with WIND's flat ISP and now (more frequently) with VODAFONE OMNITEL's flat ISP

Related

Please Help: Pb Active Sync on the AIR and GPRS Connection

Hi guys,
I have a weird problem since a couple of days.
In fact, when I try to use the GPRS, the connection is established however if I try to active sync I get an error message saying that the server can't be reach and if I try in PocketIE to access a website it says also that the server can't be reach.
I check and my connection is up and running. Especially, it was working before, and I didn't change my configuration.
I am using T-Mobile UK Network with T-Mobile Web'n'Walk plan for unlimited data.
Does anybody has any idea?
For your information, I am running the PDAViet Crossbow ROM.
Thank you very much for your help.
Julien
A hard reset had solve the problems. I just hope it doesn't happen again

Edge/3G Problem (Cingular)

As of a few days ago my EDGE/3G connection stopped connecting. All the settings are correct, even re-entered them manually a few times, still get the 'cannot connect' error, even though signal strength is more than adequate.
Even stranger, however, is when I use a .cab to automatically inject the settings everything works fine for a matter of minutes, then the connection problems resume.
Running CUSTEL's 2.5, problem started a couple weeks after the flash, and the only thing I have installed since is the Palm Threader, which makes no sense that it would be the culprit.
So this is not a WM6 issue correct? Its an issue with you messing up your connection settings... WRONG THREAD
Pardon me, it is not an issue with my settings, as I said in the first post even if I use a Settings Cab to inject them the data connection still quits after a few minutes even if i have not changed any settings. This never happend with WM5 and it is the first time it's happened with WM6, I would take it into a Cingular store, but I'm concerned the reps would see WM6 and just nullify any support.
Need more info to diagnose. What apps are you experiencing the problem in? Which cingular plan are you on? Which cab did you use to inject the settings.
There is some problem with the lastest wm6 roms for using cingular and pie if you are on the isp plan. Make sure your DNS is hard coded and it will fix it if its the same problem. Seach the forums and like most probs you will find your answer.
connection problems
just to let you know I have been having trouble connecting I connect and then get kicked off I had to use the isp connection settings my friend works for them and he told me it had to do with towers and the cingular and att thing
Edge and 3G
cingy had issues today had the same issue earlier all better now
yeah pure data access seems to be going alright, but for some bizarre reason i can't send/receive email without a synch error (will have to see if this relates to the Palm SMS Threader app though).
thanks guys.

Problem with GPRS Connection in german O2 Network?!

Hey there,
is anyone else experiencing problems trying to connect to the internet using the GPRS Line in the O2 Network?
It was working all finde and then, from one day to the other, my phone kept losing GPRS, the "G" disappeared and it was unable to establish an internet connection. I can only get the "G" again by going to the Phone settings and manually select the O2 Network again. Then it works for about 5 minutes and i lose the signal again. So, to all german members with O2, anyone else having these problems?
Edit: Sorry for wrong board, realised it to late, but since i have Meshles 3.01 Touch installed, i guess its also right here in the WM6 Forum

Troubles with connection

from yesterday my phone stop connecting with my Mobile Provider.I am didnt drop it or install new software during this time.I try to change my SIM card with new one and with SIM from other Provider but the problem still exist. Today i try first reset and after that I install wm v_6.5 set up all options for my country ,again try with 3 different SIM but...
i still can't use it like phone.Can't connect to my Operator.
thx in advance for advices and help
Did you run the connection setup in the accessories folder?
Did you run the connection setup in the accessories folder?
Did you run the connection setup in the accessories folder?
I have the same problem. Tried to install different ROM`s but it seems that phone connectivity is gone. It is not able to connect to cellular network (searching connection forever) but BT and WIFI works fine as well as all other stuff. This is not an issue with location since I tried it in different places where other phones working fine and shows excelent signal.
Odd, my data connection suddenly quit yesterday as well (had the EVO series ROM loaded). I loaded on the new build from today and it worked for a few, but then stopped again.
Any ideas? I can make/receive phone calls, but the data connection is no longer responding.
nobody know ???
hmm,nobody know how to dissolve this problem or nobody care ??
just wondering what i can do with my phone - coz it is unuseless now.
As i read - i'm not only one with this troubles.
p.s. - never syncro your phone with " GoodSync " program
Taxed out i had another p4000 which would connect to data then disconnect.
HTC 621 true Microsoft verson.
bump for this topic coz i am loved in my phone and still can't use it
i did the same like description from this topic
http://forum.xda-developers.com/showthread.php?t=535459
Just out of curosity what is shown in the "Access Point" under Connections/GPRS for your data settings?
try internet2.voicestream.com or epc.tmobile.com

res://ieframe.dll/NoRadioWifiOff.htm

Hello, i am new inn the forum and new with WP/ terminals.
I have now a HTC HD7 surround, i am from Argentina, and my cellphone company is Claro Argentina.
My HTC is free from factory (at&t) , so any SIM is running well, but i have a navigation problem:
I can´t browse the web with 3G, i can via WIFI, but not 3G.
I have a iPhone 4 2, and i can browse the web with that phone and same SIM.
I already added differents APN´s and downloaded the Connection Setup via Marketplace.
I reseted the phone 3 times
The problem still here.
when i try to use the IE, in the navigation bar, i type some address, and after less than 1 second i see this :
res://ieframe.dll/NoRadioWifiOff.htm
Click to expand...
Click to collapse
And then, a page saying:
We´re having trouble
reaching this webpage.
-------------------------
You have might lost your cellular data
connection.
etc etc etc...
I cant navigate via 3G, I CAN via Wi Fi.
Any help ?
Thanks in advance.
nocive
Hello man, I have exactly the same problem with a LG E900 with Windows Phone 7, the phone was bought from Spain (Movistar), everything is fine except 3G.
Did you find the solution for this?
does 3g works at all or are you having problems only with IE?
go to the dignotic page
Intall the diagnotic app and look at post #150
http://forum.xda-developers.com/showthread.php?t=839154
Hi sandrobber, I have a LG Optimus 7 and the same problem, the wifi and EDGE and Wifi works without problem, I've checked and my mobile operator uses 850UMTS band for 3G and the phone works with that band, I've set the correct APN but I still without 3G and EDGE really sucks!
I've check the post #150 in http://forum.xda-developers.com/showthread.php?t=839154 but I can't find any place to use these codes in order to set up my 3G automatically, that codes works with my LG Phone? How can I enter those codes?
I will really appreciate your help.
Vitucho
I have the same problem too, and mostly on EDGE... I have to restart the phone to get it working again... Very frustrating if you tell me.
LOL, now that you all say that , I have the same problem to.
I need to turn off 3G if I want to have an internet conection.
did you all flash some rom's on the phone ?
ceesheim said:
LOL, now that you all say that , I have the same problem to.
I need to turn off 3G if I want to have an internet conection.
did you all flash some rom's on the phone ?
Click to expand...
Click to collapse
The thing is, I don't have 3G 2100 in the country I live in
I can only rely on EDGE, so activating/deactivating 3G is useless for me.
I didn't flash. Just upgraded to 7392 two weeks ago.
I'm looking for a way to completely reset the network stack (equivalent to a reset) in order to re-establish a fresh connection.
My old Nokia E63 with the same SIM card had no problem establishing data. The only problem was the sometimes, the connection was really slow to attach (something like 15 seconds). I therefore suspect that WP7 phones have a too stringent timeout problem, i.e. the phone gives up trying to establish a connection after a failed first attempt (the phone didn't wait long enough).
I am thinking of just reflashing only the radio rom from a stock o2 rom (I have o2 Germany)
ceesheim said:
I am thinking of just reflashing only the radio rom from a stock o2 rom (I have o2 Germany)
Click to expand...
Click to collapse
Yeah you can try that. I have the gut feeling that it's firmware-dependant. If someone can try with the latest Samsung FW that's been posted recently... I'm a bit lazy to lose all my settings

Categories

Resources