I can't believe I've only had this unit for 2 weeks and dropped it causing lcd damge. I've seen only a couple of listings for a complete lcd/screen replacement. Am I stuck with only 2 vendors, www.pdasmart.com or www.pocketpctechs.com to deal with or are there other options out there?
Thanks in advance
Related
Hi, has anyone had their screen replaced by HTC? I have some pretty deep scratches on mine and was wondering how much it would cost.
Thanks.:good:
I had mine replaced, but under warranty. I think it's somewhere around 150 quid.
Same here £150
Sent from my GT-I9300 using Tapatalk 2
I had changed mine. My touchscreen panel was broken because I dropped the phone accidentally. I also was suffering from "yellow stains" issue on screen.
And with unrooting/relocking and a good scenario I put the device under terms of guarantee :laugh:.
Took a whole month (to the spare lcd and touchscreen to be delivered and being repaired) but it was worth it! Phone is now good as new, and no yellow stains on lcd.
So just make up a good scenario, it may work for you.
Any of you guys ever deal with repair universe for replacement screens? I recently picked up an xperia play on craigslist for $40 with a cracked screen but everything worked perfect. So I ordered a replacement from repair universe. Got it put on and it doesn't respond to touch. I've taken it apart 4 times now checking connections and everything is fine so it must be a defective part right. So far all I got back from them was "every unit is tested before shipping" check this, that and the other thing. Am I going to have a problem getting them to send me another one? Anyone else have this problem?
Sent from my SPH-D700 using Tapatalk 2
So I dropped my phone, screen cracked. Pretty upset about it considering it was only dropped from about a foot.
Anyway, looking for repair options. I have insurance and heard LG is another way to go but looking for a different option.
My screen is cracked, digitizer responsed only where their is no cracks, LCD is fine.
Looking up repair places, they want to replace the whole assembly LCD/Screen, so my question
how difficult is replacing just the screen? i'd say I do pretty well at DIY
anyone have a good repair person who just does the screen or anyone will to sell your services to me?
Any help is appreciated.
Thanks
I replace my wife's G3 screen that was very damaged from the impact, I bought the part on ebay for $107 about two months ago, I replaced the screen, no to hard to do.
Hello everyone,
the screen of my N7 2013 cracked after his first fall on the ground... the tablet still worked but the touch screen was unresponsive, so I decided to replace it and bought a new screen and digitizer. I replaced it following youtube tutorials but the new touch screen was unresponsive. I thought the replacement i bought was faulty, so I wrote to the seller who refunded me. So I bought a SECOND lcd+digitizer replacement, from a different seller. Same story: after replacement this second digitizer is totally unresponsive too.
I checked connections so many times with no luck. I can't believe that I bought TWO broken digitizers from two different sellers. I don't think I broke something else working on replacement (but I cannot be sure ).
So I'm wondering if there is any possible software cause for this touch screen behaviour... is there something I can still try to do before throw away the tablet? Anyone can help?
Thank you!
parcs said:
Hello everyone,
the screen of my N7 2013 cracked after his first fall on the ground... the tablet still worked but the touch screen was unresponsive, so I decided to replace it and bought a new screen and digitizer. I replaced it following youtube tutorials but the new touch screen was unresponsive. I thought the replacement i bought was faulty, so I wrote to the seller who refunded me. So I bought a SECOND lcd+digitizer replacement, from a different seller. Same story: after replacement this second digitizer is totally unresponsive too.
I checked connections so many times with no luck. I can't believe that I bought TWO broken digitizers from two different sellers. I don't think I broke something else working on replacement (but I cannot be sure ).
So I'm wondering if there is any possible software cause for this touch screen behaviour... is there something I can still try to do before throw away the tablet? Anyone can help?
Thank you!
Click to expand...
Click to collapse
You only replaced the touch screen or also the daughter board? Is there any revision number on the screens/cables?
Sent from my Nexus 7 using XDA Free mobile app
I only replaced digitizer and lcd, daughter board was the original one (rev 1.4).
The old digitizer had a sticker with a qr code and some numbers on it, and another code printed on (see pic ..935).
I found no reference for these codes on google, the qr code gives no results.
The new digitizer has no sticker and no codes printed, only a printed mark displaying "cx 2015-1" (I think it's a seller's mark).
On lower part, where circuits and cable are, the original digitizer shows two other numbers (see pic ..942).
New digitizer shows two numbers too, smaller one (ME050111) is the same, except for last two numbers (original digitizer has "01", new digitizer has "12"). The biggest number (343308Q in the pic) is completely different on the new digitizer.
Hi,
I tried upgrading my PX3 chip to PX5 and in the process of disassembling the device I noticed the touch screen digitizer connector was not completely intact and I couldn't put it back in one piece. Now my chip is upgraded and I can hear the radio when I start my car but all I'm seeing is a black screen.
Is there anyplace I can buy a replacement for the whole screen (8 inch)? I searched some old threads and came across some links to Aliexpress selling exactly what I need but they weren't working anymore and I couldn't find any sellers right now, or more likely just didn't know where to look.
Any help would be most appreciated, would hate to have spent $90 on the new chip and then have to buy a new head unit to replace the whole damn thing just because one screen connector is broken.
Have you thought about contacting the reseller for spare parts (aftersales service)?