Related
Does anybody have a copy that I can have which involves not messing with and that I can flash to my XDAIIs with no country error and no o2 stuff on it so it looks like the i-mate :?:
erm...................no
1.read the wiki
2.read the wiki
3.read the wiki
if above dosnt work try contacting your doctor about your brain......
lol, yeah, please read the wiki, you cannot go wrong, just follow the simple instructions, dont worry, you WILL be fine, if you get a country error then dont worry about that either, just keep trying, 8)
we have faith in you man!!!
8)
Dude do what this say's.
I've just done it: UK XDA IIs, on Orange network, running i-mate 1.40 ROM.
Slightly going OT...
I am quite keen to do the upgrade from my standard O2 XDA2s 1.31.00 WWE ROM, but I am a little unsure on what 1.40 ROM to download from WIKI. I think I need:
i-mate 1.40.176
I know my device is a Blue Angel, Rom as above, extended ROM as 1.31.139 WWE
Can anyone confirm the correct download please?
Also, has anyone had any problems installing on XDA's the same as mine?
I have read the install tutorial, but would like to get an idea of if I am going to run into problems.
Oh, one more thing... What advantage does ROM 1.40 have over my existing ROM apart from bug fixes (oh please! daily lockups!!!)?
Many, many thanks.
O2 XDAIIs Upgrade
I used the i-mate 1.40.176 upgrade for my O2 XDAIIs. All in all its pretty stable, with only the Bluetooth stability (memory issues and BT Manager & Settings "disappearing") as the main issue. Much better than the O2 1.31 ROM (will they ever get that 1.40 update out...!?) You will need to use the "MAUpgrade" rather than "BAUpgrade" utility, as the 1.40.176 ROM was built for the i-mate rather than the xda2s.
One problem I did have with this ROM at the start, was that GPRS would not stay connected. This seems to be a sporadic problem among those that upgrade, but if you experience it after upgrading to this ROM, you can correct the problem by replacing the "CallerID" cab in the extended ROM with the older version (1.17) This version of the file is available on wiki also. This will involved unhiding and unlocking the Extended ROM and replacing the file. Look at the wiki instructions under Blue Angel for "Cooking Your First Extended ROM" That said, you may not experience this problem, so upgrade the ROM first and see how it goes.
All in all a much better ROM. I am trying the new O2 Asia WWE ROM with a modified extended ROM and this is also pretty good. Slighty better Wi Fi switch on and off in my opinion. This one is on wiki also, but you will probably need to "cook" the extended ROM here a bit more than the 1.40.176 version.
Hope this helps
Chris
Anybody tried the imate 1.40 rom on O2 XDA IIs purchased from Singapore?
I am facing problems to using any 'Today Plug-ins' like IP Dashboard, O2 Plus beta, Lexisgoo English dictionary etc. The problem is after say 30 minutes or after more, my keyboard input will only be selectable, cannot select CE-Star chinese keyboard or Intellipad.
What do I have on my O2 XDA IIs?
1. CE-Star
2. Intellipad and Intellidialler
3. Lexisgoo English dictionary
4. SKTools
5. Sprite backup standard
6. Cal89A calculator
7. MDict 1.21
and many more.
Please help anyone.
Thanks.
my exerience with this device and all the ROMS has been that the fewer Today plugins you have the better. SPB Pocket Plus V2.5 caused a lot of lock ups. Not sure about new version 3.0 Seems multiple Today plug ins cause conflicts. Hard to pinpoint all the interactions and what affects what... Not much help I am afraid :-[ I would just try to keep them to a minimum.
Regards
chris
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Two major problems that I am facing with 1.40 ROM include:
1. wifi can't be connected after disconnecting GPRS.
2. bluetooth problem (memory error) or storage card disappear after disconnecting BT.
Anybody experience these?
Cheers,
zard said:
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Click to expand...
Click to collapse
Me !!
I had used the Imate rom before but, there has been many casses of terrible lag. When i updated to 1.40 and radio to 1.13 wooo... just very very fast...
Installing the latest Pocketplus with my 1.40 ROM makes my device hard-reset itself.
I need a way of getting IE to be able to save pictures. Anyone know of an alternative way to do this?
I have no problem with pocketplus 3.0.
Which version you are using?
1.40 ROM has serius today screen problems with me too (That's why I still use 1.31).
I have no problem with pocketplus 3.0.
Which version you are using?
Click to expand...
Click to collapse
My ROM configuration is in my sig.
The SPB pocketplus version is: v3.0.0.3652
I really want the mods it offers. (particularly 'save picture as' in IE).
Hi all, my new BA arrived finally! I have decided to keep it afterall. I am a total n00b at this stuff, and really struggle to understand the Wiki site. However, I did manage to download XDA tools and backup my ROM.
I then downloaded the PDA2k_WWE_14000_176_11200 ROM from the FTP site. It said it was going to update my Radio and Ext. ROM too. Anyhow, it comes up with the country code error.
I added that line of script into the file but it still has the error. Any ideas? I thought the iMate 1.40 ROM was supposed to work on the XDA2s.
I really want a more stable device. Are there any other ways to do this? I tried using XDA Tools to upload the NK part of the iMate ROM separately, but it said it needed to be an exact size to work.
What is the best ROM? We couldn't even figure out how to cook and Ext. ROM so if anyone could give me a hand it would be much appreciated. The Wiki assumes you know what you're doing but I really have no idea.
Cheers guys - Mike x
You don't need to use XDA Tools it you're using a standard manufacturers ROM, just the No ID program for the device ID shortcut.
I had to add the country code ID in too, but after that it was golden. Not sure what's up with you...
Chris
If you are on O2 UK and want the imate ROM that also has O2 settings for GPRS, MMS etc, have a look here:
http://forum.xda-developers.com/viewtopic.php?t=24000&highlight=
It's a set of instructions that I made using the wiki, as well as info other members had given me, particularly mdaIIIuser to upgrade a UK O2 XDA IIs to the imate 1.40 without having to enter GPRS settings etc manually afterwards, and still keeping the country code to O2 (which means you can use an official O2 upgrade later , without any problems, if they ever get their arses in gear!)
If you need any more help, let me know and I'll do what I can. If you have an ftp site you want me to upload my upgrade files to, PM me with the details and I'll send it you. I'd put in on the ftp here, but i don't think it's worth taking up so much space with a customised ROM.
HTH,
Fin
OK guys, I managed to upgrade my device to the latest iMate ROM, and the 1.13 radio ROM
Problem now is cooking my Ext. ROM. I know I can't update the Ext. ROM that came with the iMate ROM. I want to put my 02 settings in, but I really don't know how. It won't let me put my old 02 image back on the phone, it says the USB is not connected properly
Does anyone have the .nb1 of the 02 Ext. ROM?
Sack that. I downloaded the newest 02 Rom I could find and extracted just the ext. Rom file from the .exe
I am learning
which o2 rom did you use? if it was the uk rom you will have problems as it is 1.31 and your rom is 1.40. you need to unlock the extended rom and copy the base rom 1.40*147 then add your o2 cabs and anything else
hth
fin
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
I did not do anything with upgradetools.rar but the device seems to be working fine. I haven't made a call yet as I'm cut off. Does this mean I don't have to do it?
Chers -Mike
Glad to have helped, although I can't take credit, I got all the info from thw wiki and other posts!
Have just been trying to upload my Extended ROM, it is a modified version of Cooked ERK 1.4x Base that can be found in the wiki under ERK 1.40 . This version of the EXT ROM does have a config.txt, you were probably looking at 1.40.176? All I did was add the 6/7 O2 CABS to the config.txt of the base rom, then changed the caller id cab to 1.20 from the link below:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
You will probably have some problems with the Ext ROM you have on at the moment, because you haven't got any of the patches for 1.40 which might mean GPRS etc might be unstable.
I will try and upload my Ext ROM again later if you want, all you will need to do is unlock your ext rom, delete the files, and copy over the new files. DO a hard reset and you're away!
Good luck!
Fin
OK, I don't understand.
I just delete all the files (aside from the 02 setup ones) of my current ROM and put these ones in? I don't need to upgrade the Ext. ROM bith the BAUpdate thing?
No, you won't use the BA Upgrade itility- that is for reflashing, which if you had a ms_.nbf file(extended ROM installation file) you would need. There is no tool to edit ms_.nbf files on Blue Angel, instead you have to unlock the Ext ROM manually, copy/delete files, update the config.txt then do a hard reset. Takes some getting used to- I was used to using er2003edit with my Himalaya to make a custom ms_.nbf file, but hey, this method works too!
Good luck,
Fin
Hey man, I already did it! Well good! It's based on the Qtek ROM you reccommended with the o2 stuff added in and the caller ID updated.
now running:
ROM version: iMate 1.40.00 WWE
ROM date: 03/10.05
Radio version: 1.13,00
Protocal version: 1337.42
ExtROM: 1.40.147 based on the Qtek cooked for use on 02 UK
My phone hasn't required a single hard reset all day and is still recieving calls (with sound) and messages
Thanks everyone!
-Mike
Hi
I am about to get an XDAIIs to replace my falling apart PDA2K.
I want to use it on Vodafone.
Is there a real 'idiots' guide to putting the latest and greatest ROM onto the XDAIIs.
(I really do mean idiots guide by the way).
Cheers.
Robin
Face to various ROM versions available is important identify the more reliable and stable. Please tell us your opinion.
Thank you.
I'd say try the new 1.42 T-mobile, it might have some improvements over the buggy (at least for me) 1.40 ROMs. If you want to go for sure, go with the 1.31 Orange or O2 ROM and extended rom with the 1.13 radio. It is not the latest, but very stable.
Have to agree, I have upgraded to the new t-mobile 1.42 and so far has been good (I was using the IMate 1.40 rom), also this seems faster but that could be me (I reinstalled all my software again from scratch).
I also use the 1.13 radio.
I have messed around and mixed and matched between the Orange 1.40 extended rom, and the T-mobile 1.42, I use an Orange SPV 2000 so saved me messing around trying to reconfigure all the settings for Orange.
Still suffering from the poor bluetooth headset sound issues (I use a jabra 200), but have given up all hope of improving the quality anyway.
I'm currently using the 1.40.00 O2 Asian WWE ROM, and I love it!
1.40 iMate ROM wit 1.13 Radio works great for me. I think I will give the T-Mobile 1.42 a go tonight though!
I love the i-mate 1.40 ROM... but the new T-Mobile 1.42 ROM seems to be a little bit more stable and faster so far. I'm using a cooked ROM that comes the best available from i-mate's Arabic ExtROM with T-Mobile's new patches, etc...
O2 Site Update with Exec ROM :
http://www.my-xda.com/xdaexec_soft.html
Is this a new ROM or O2 providing it as a download to fix peoples devices when they corrupt them?
well spotted a18041967!!!
Upload to XDA FTP server
Can an O2 user upload this rom to the xda-developers server please?
It's the initial release ROM, so it's the same as the one all XDA Execs are being shipped with.
It has (I checked):
OS 1.13.48 WWE (Older than Jasjar, which is 1.13.53)
Extended 1.13.139
Radio 1.04.02 (same as Dopod, was already on FTP)
you can enter any imei
do you think if i have the jas jar rom installed i will be able to override it with the exec rom
sure ... just use the patched exe for upgrade.
i'm thinking of using ROM from jasjar, ExtRom from O2 and the radio from O2
can someone tell us what's installed on the O2 exec by default ?
is it better or worse than the JasJar ?
The only thing that really is different from the Jasjar rom is the O2 Active UI, and we all know that is very unstable.
Most Exec users end up using basic or corporate install, which is comparable to pressing the reset button after a hard reset and thus bypassing the extended rom setup.
I did no different then anyone else in that matter. I selected basic install. The Jasjar OS also is a tad newer, so unless you are a sucker for the O2 layout and style, I'd say stick with the Jasjar.
(I'm a sucker for the O2 styling so I will probably end up combining the Jasjar OS and the O2 ExtRom ;-))
Just be aware: The Jasjar Extended rom will set your boot logo to the I-Mate one, the O2 Extended rom will NOT set it to the O2 one! It does not contain splash.nb files!
How to Update radio only to 1.04?
I have already once download rom radio upgrade to the 1..031 rom , is there a similar radio only package?
Re: How to Update radio only to 1.04?
mikeycollins13 said:
I have already once download rom radio upgrade to the 1..031 rom , is there a similar radio only package?
Click to expand...
Click to collapse
Just rename it to zip, extract it, delete ms_.nbf and nk.nbf (the only NBF file you need to leave is radio.nbf), use the MAUpgrade_NoID.exe file and flash your radio. You will not even lose your settings or installed programs
Ok, here's my findings so far, I took delivery of my XDA Exec and all was OK, foolishly I decided to upgrade to the Imate ROM.
After the upgrade I experienced continual problems connecting to my WiFi, and was unable to get the Wireless modem to work.
Today I reverted back to the o2 ROM, both the WiFi & Modem issues have been resolved.
a18041967 said:
Ok, here's my findings so far, I took delivery of my XDA Exec and all was OK, foolishly I decided to upgrade to the Imate ROM.
After the upgrade I experienced continual problems connecting to my WiFi, and was unable to get the Wireless modem to work.
Today I reverted back to the o2 ROM, both the WiFi & Modem issues have been resolved.
Click to expand...
Click to collapse
I am using the imate Rom with my MDA Pro. No problem at all connecting to WIFI.
Is the RAdio version 1.0.4. better then the one on hte JASJAR I beleive 1.0.3.something? And what is beter ??
Wiz said:
The only thing that really is different from the Jasjar rom is the O2 Active UI, and we all know that is very unstable.
Most Exec users end up using basic or corporate install, which is comparable to pressing the reset button after a hard reset and thus bypassing the extended rom setup.
I did no different then anyone else in that matter. I selected basic install. The Jasjar OS also is a tad newer, so unless you are a sucker for the O2 layout and style, I'd say stick with the Jasjar.
(I'm a sucker for the O2 styling so I will probably end up combining the Jasjar OS and the O2 ExtRom ;-))
Just be aware: The Jasjar Extended rom will set your boot logo to the I-Mate one, the O2 Extended rom will NOT set it to the O2 one! It does not contain splash.nb files!
Click to expand...
Click to collapse
Wiz,
I have the MDA PRO with JasJar ROM I have just upgraded to the Radio Version 1.04.02. Everything is fine. Now I have a QUestion:
If I hard reset my device and bypass the Extended ROM install does it mean tha my Boot screen will not become the one from imate ??. I thought the splash.nb files are in the ROM and not in the Extended ROM. I have tryed to find the Boot Screen image in the cab files of the JasJar Extende ROM and I can not find anything?
Any Ideas
Never understood why we have to use 'MaUpgradeUt_noID.exe' always (I would say), specially in some situations...
For instance if we have an original Qtek WWE ROM (Universal_Qtek_WWE_11364_151_10300.exe) installed and try to upgrade to the next Qtek WWE official AKU2.0 ROM, why does the 'ROMUpgradeUt.exe' keeps giving 'Country ID Error'!?
- Device is the same Qtek and not locked to any Telco Operator.
- Both ROMs are official WWE and produced to the same device.
Annoying
I believe it would be easier to use 'ROMUpgradeUt.exe', as 'MaUpgradeUt_noID.exe' was not originalli designed to UNI, and maybe thats why we experience some difficulties with it. Even with bootloader upgraded to v1.01 I have to run it at least twice (Ok with v1.00 bootloader it was much harder).