dopod 900 for xda exec question - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hi everyone~
I am a new user of XDA, and I got a O2 xda exec (UK) last week (as my christmas present~^^). I surf this forum in these two days, and I find that dopod 900 rom could make my xda display and type in chinese (am I right?). OK, my first question is how can I get the the latest rom of dopod 900? and the other question is could I update the rom or replace the o2 rom without any tool kit? and the last but not hte least, can I change back to o2 default rom if I fail in changing the rom? THANKS~!

if you just want to view & write in chinese. you can always install 3rd party software like CE-star. www.mobem.com

I have tried out the CE-star and monster one, their performance and stability are not as good as my expectation. That's why I want to find anything replace those 3rd party software...
I have read the post Is it possible to Upgrade my Enligsh Jasjar to Chinese?
I want to know is Jasjar same as O2 xda exec? Can I do the same way as they've done?

RE
shunichi,
Did you get a registered copy of CEStar Suite or a trial copy? Trial copy gives limited write capabilty which might affect the O2 EXEC. Reading sms and web sites should be ok
As for using a chinese ROM you can post over at the other thread and probably get better advise.

I flashed my XDA exec with Dopod 900 tets rom and it work great
The chinese display have improve a lot since WM2003SE

yes...
I'm so eager to change my xda exec to chinese rom...
for the display and input... I don't know why it can't work properly when using 3rd party software...
so stupid am I don't have any idea to get and change the rom... although so many of you have done...

The CHT test ROM on FTP can no longer be found. Where can I find it?

negatong said:
The CHT test ROM on FTP can no longer be found. Where can I find it?
Click to expand...
Click to collapse
I reload to upload folder

mwang said:
negatong said:
The CHT test ROM on FTP can no longer be found. Where can I find it?
Click to expand...
Click to collapse
I reload to upload folder
Click to expand...
Click to collapse
Got it. Thanks a lot, Wang!

Related

German Qtek 9000 ROM available?

Hello!
The Qtek 9000 is sold in Germany with a ROM dated middle October 2005.
Is this ROM also available for download somewhere?
Unfortunately I couldn't find it yet...
I would like to try it on my MDA Pro! :lol:
Deal!
Hey,
I'm looging to change my Qtek german ROM to an English one.
I'm pretty sure we can find a deal in exchanging our ROMs!
But you need to tell me how to extract and how to reflash afterwards.
If interrested contact me.
The english ROM is here on xda-devs-FTP
But: please before flashing your OS upload the german ROM there!
This would be my very best xmas present
Cheers
Ok for your christmas present!
Hello Cendaryn,
I just need coaching or tutorial for extracting and then flashing the ROMs.
If someone tells me how to extract I will post for sure.
And I need also help to flash the english ROM.
Thank you
Well this is my biggest problem - I know how to flash the ROMs but not how to dump them. But I guess a little search in the forum here will help
Cheers
uni_cdl-me_11238_132_10301_ship.exe ) Is this the Qtek ROm? if its not please show me the direction.
Sorry
Sorry with no tutorial I can't help.
I'm really willing to post the german ROM. But haven't a clue where to start.
Does anybody know?
Thank you.
Dumping the ROM seems to be not easy
this is what I found: [Universal] How to d2s (dump) the ROM
I can't help you because I dont have a Universal (Qtek 9000) but I'm very interested in files of this ROM too!!!
Dumping the ROM seems to be not easy
Well, you say it.
If I look the post you mention I still have no idea where to start ???
I keep on seeking for complete tutorial.
By the way, does anybody know if changing the ROM is also changing the WM language? Or do I have to change separately?
Thank you.
A ROM also includes the WM language.
Maybe this topic helps:
http://forum.xda-developers.com/viewtopic.php?t=36102
Cheers
Near to target ... but ...
Hi,
Thank you for the links, I feel I'm very close to dump the german ROM.
But not done so far.
And I'm becoming impatient because I found the ROM I want to put in place.
Keep on helping me end pray for I resist not to flash the original german ROM. :twisted: :twisted:
Arrgh!
I'm going mad to find how to backup original ROM.
Don't know if I will resist any longer to flash without backup.
Would You please try to run grab_it on your Universal?
This would give us a RAW-ROM-Image.
and i need a file dump (TestWM5) of a German ROM.
but you will need a Storage Card to do this.
German ROM needed ?
Hi all,
just reading through this thread here. I have an original VDA-IV with an unchanged ROM. I am trying to convince myself to upgrade to JasJar or O2, but did not do so yet. Any wish for a dump from me ?
(Have to leave now, but am able to do so tomorrow)
Ruud
yes, yes, yes...
@Ruud Westerhout: view your last Post
I am getting today my german qtek 9000.. But I will flash to wwe Qtek.. I will try to dump the german one first.. But maybe I need a little help..
Alex
Idea
Maybe, we can have it a little easier, because I think, ROM dumping is very difficult and could also be hard to flash on other devices. For MDA compact (HTC Magician) for example, you had to edit the dumped ROM with a binary editor before it worked on other devices. Also, there often were problems with some SD card readers/writers, etc.
The best way would be getting a ROM update from the vendor (e.g Qtek) as a complete EXE-File. This could be flashed on other devices with the maupgrade_noid-Tool from xda developers FTP server.
So, it would be nice of you Qtek users, if you could write an e-mail to Qtek.ch!
They offer updates for Qtek users, but you need to mail your IMEI number. So MDA Pro users are not able to get Qtek updates this way.
I'll do this.. No problem..
Any other requests??
Re: Idea
Manolito said:
Maybe, we can have it a little easier, because I think, ROM dumping is very difficult and could also be hard to flash on other devices. For MDA compact (HTC Magician) for example, you had to edit the dumped ROM with a binary editor before it worked on other devices. Also, there often were problems with some SD card readers/writers, etc.
The best way would be getting a ROM update from the vendor (e.g Qtek) as a complete EXE-File. This could be flashed on other devices with the maupgrade_noid-Tool from xda developers FTP server.
So, it would be nice of you Qtek users, if you could write an e-mail to Qtek.ch!
They offer updates for Qtek users, but you need to mail your IMEI number. So MDA Pro users are not able to get Qtek updates this way.
Click to expand...
Click to collapse
This is the best idea in this thread! So please go on guys
Cheers

German QTEK ROM ready for download!

After an 12 hour odyssey with the new t-mobile rom (1.20...), I finally decided to switch back to my original german qtek rom. Unfortunately I didn't dumped my original one - so I've called a friend who owns a qtek 9000 too. I was lucky - tomorrow he's going to sale it on ebay...
I could dump the qtek rom, encode it and load it onto my own. There is just one problem: the original install app will not work. You have to use the noID-version. Don't worry if the routine fails - try again.
The worst case: the qtek gets in bootloader mode - good for you. The rom updating will work seamless now. If you get stuck into that bootloader mode, just remove the "ms_.nbf" & "nk.nbf" and perform only the radio update again - after a hardreset the good old gtek splash screen will show up and you'll be fine or lets just say: welcome to your new mda pro without any branding stuff (you'll love the dialer skin!)
That package contains the latest radio rom from the mda pro rom update!
FTP ftp://xda-developers.com
Path /Universal/ROMs/UNI_Qtek_GER_11373_10600_113151.zip
Login: xda
Pass: xda
Support this ROM combination A2DP?
THANKS A LOT!
I was waiting for this many weeks...
I'm just wondering: what was wrong with your TMo ROM (the new one) ?
I use it since now more than a week and I am very satisfied with it.
Had QTEK ROM, O2 ROM, i-mate ROM before.
Cheers
hrb
available RAM with various ROMs
Hi,
I just wonder if e.g. the qtek rom leaves more RAM? I am desperately looking for more RAM, there is never enough. I have the new t-mobile rom, it is much more stable than the old one, but the RAM situation has not changed. I have 1800 contacts, and when I reset the MDA Pro I will start with roughly 15 MB, very soon they will be down to 10 (once the mail has been checked) and from then on...I cannot make a video call, I can hardly use the camera, I can just about open a web page and than I am down to 2....I don't know why other people have no problems with this, but for me....I need 20-30 MB more...
Is there a solution to this? Is at least qtek rom a bit more generous?
Looks like that link is broken. I can't open it. It shows permission denied. Where else can i get german ROM update. Or Russian.
@ hrb
its pretty simple: i hate that t-mobile dialer. and there was no way to get rid of it. so i switched back.
greetz
Brodie
Re: @ hrb
brodieberlin said:
its pretty simple: i hate that t-mobile dialer. and there was no way to get rid of it. so i switched back.
greetz
Brodie
Click to expand...
Click to collapse
You are absolutely right on this one - the TMo dialer is ugly as can be.
That's why I replaced it by this one.
Not to bad, aint'it ?
Cheers
hrb
Can I use a Qtek rom on a IMATE jasjar?
I have this imate jasjar in english and i want it in spanish. The only rom i saw was for qtek.
Thanks a lot guys!
agustinpac: yes, it is possible.
e.g. I installed qtek on t-mobile..
what you need is the MANoID installer that will make that the device is not going to check if the upgrade is "legitimate" or not.
If you have an extracted complete set of installation files in one directory
you just exchange the original installer with this NoID installer that a very proficient member of this forum wrote.
and then you should put the device in bootloader mode by makin a reset while pressing the light button and the power button together, then connect to the pc and start the installation by launching the noid installer.
after 20 min you are done. by the way: this way you can mix also rom, ext rom and radio versions from different origin and release version.
I hope this helps, if not, let me know.
agustinpac said:
Can I use a Qtek rom on a IMATE jasjar?
I have this imate jasjar in english and i want it in spanish. The only rom i saw was for qtek.
Thanks a lot guys!
Click to expand...
Click to collapse
Hello agustinpac,
I was the one who uploaded the QTEK spanish ROM as this was the ROM installed in my device, but i needed an english one. I'm now using the JASJAR and i think the O2 is better but have no time to flash back to O2. Or maybe wait for the new ROMS which are esupposed to be out next moth at latest. Never tried T-Mobile.
There are 2 QTEK spanish files. one is the rom update which updates ROM and Radio, and the other is the extended ROM which you have to install manually. To do this, Unlock ExtROM( search how to do this). Extract Extended ROM Zip file to a directory in your SD card. Then use Total commander and copy these files to the extended_rom partition. Hard Reset. This should do it.
Contact me if you need more help. Also, if you install this ROM, your hardware keyboard will be Spanish, meaning "Ñ" is one of the keys on the keyboard (under the K key) and also other keys will be remapped. If you need to remap the hardware keyboard to english, tell me also. The software keyboard will display and work as a spanish keyboard so no problems with this one.
Goodluck
Re: @ hrb
hrb said:
brodieberlin said:
its pretty simple: i hate that t-mobile dialer. and there was no way to get rid of it. so i switched back.
greetz
Brodie
Click to expand...
Click to collapse
You are absolutely right on this one - the TMo dialer is ugly as can be.
That's why I replaced it by this one.
Not to bad, aint'it ?
Cheers
hrb
Click to expand...
Click to collapse
Great skin! Where can we download? And how to install?
Re: @ hrb
Cendaryn said:
hrb said:
brodieberlin said:
its pretty simple: i hate that t-mobile dialer. and there was no way to get rid of it. so i switched back.
greetz
Brodie
Click to expand...
Click to collapse
You are absolutely right on this one - the TMo dialer is ugly as can be.
That's why I replaced it by this one.
Not to bad, aint'it ?
Cheers
hrb
Click to expand...
Click to collapse
Great skin! Where can we download? And how to install?
Click to expand...
Click to collapse
Check on the following link. Everything is explained there.
Cheers
hrb
http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=453

WM6 Upgrade (XDA Mini S) using Official XDA Orbit WM6 OS-ROM possible?

Hello,
I am really new with in this topic and think i would need some advice / maybe help to try an wm6 upgrade of my O2 XDA Mini S (Qtek 9100).
I currently have the following plan:
Recently O2 released an WM6 Upgrade for the (much newer) XDA Orbit Model. So far I was able to extract the ROM-Update contents (got some nb-files including one 06_OS.nb).
I also have done a backup of my current ROM using aWizard. The tool created a backup that consists of some nba-files (there's also an os-rom-file). Is it possible to convert the Orbit WM6 OS-ROM to nba-format and exchanging the original OS-File of the aWizards-Backup to flash it back to my XDA with WM6?
Some might say I could use an WWE WM6 (f.e. Crossbow), but I would like to have WM6 in German and don't know where else I could find one matching in German for my phone.
Could anyone help me or give me some advise?
Best Regards
Gabriel
DON'T!! You will destroy your Mini S.
Go to the Wizard Forum and look/search in there.
TheBrit said:
DON'T!! You will destroy your Mini S.
Go to the Wizard Forum and look/search in there.
Click to expand...
Click to collapse
Hello, thanks for your reply. I recently had a look at some posts about upgrading. But so far I didn't find a post to cook a ROM basing on my own (original O2) OS-ROM. The procedures I figured out in the forum seem to be very complicated. Isn't there a less complicated way to do it?
Best Regards
Gabriel

Which WM6 ROM for XDA Orbit is the Best?

Hello Together.
Which WM6 ROM is the Best Working and the most bug free ROM for XDA orbit ??
I have the O2 ROM installed, and it have many Bugs.
So i hope smb can tell me which GERMAN ROM is the Best.
Thanks pmneo
pmneo said:
Hello Together.
Which WM6 ROM is the Best Working and the most bug free ROM for XDA orbit ??
I have the O2 ROM installed, and it have many Bugs.
So i hope smb can tell me which GERMAN ROM is the Best.
Thanks pmneo
Click to expand...
Click to collapse
I thaught there was only one German WM6 rom available at the moment. The one from O2.
If you ask for a WWE rom, I tried them all. And for me the best rom at the moment is the one from PDAMobiz. The most stable, and the less bugs.
But the one from tom_codon (Black and Blue) is good too. Only a few minor bugs. Like SMS and email is not working. But Tom is working on a new release for it.
Is it an official O2 WM6 ROM? Where'd you get it? Can you supply a link? My Orbit is currently "bricked" and i am trying to get it fixed.
Yes, it is the Official O2 Rom, which can be found on the o2-online web-site:
Try this Site: O2 Online
Regards
Already tried this. This is the GERMAN one. Gets to about 3% then the phone resets.
Shand359 said:
Already tried this. This is the GERMAN one. Gets to about 3% then the phone resets.
Click to expand...
Click to collapse
just goto migsoft and get it fixed
Thanks for your reply. Already tried this route. They are unable to help me. Phone has now been fixed under warranty by O2, unlocked by imei-check and successfully flashed to BEPE's WM6 ROM. If anyone can suggest a better ROM then please let me know.

I have WM6 O2 UK ROM on my Orbit Photos added

I have had my Orbit fixed by O2 and now have WM6 on it.
Can I extract this from my Orbit for other people to use?
Regards John
jjmet1979 said:
I have had my Orbit fixed by O2 and now have WM6 on it.
Can I extract this from my Orbit for other people to use?
Regards John
Click to expand...
Click to collapse
It´s free to download on the official o2 website.
....eh...
orda said:
It´s free to download on the official o2 website.
Click to expand...
Click to collapse
Really?
Where?
orda said:
It´s free to download on the official o2 website.
Click to expand...
Click to collapse
i think you will find that it isnt available yet..
Hi - its possible to dump the rom but to make the dump into anything flashable is not easy. The official o2 uk wm6 rom is not out yet. What would be interesting is could you tell us the os number on the boot screen - will Be 3.400 or 3.500 etc.. Also the build no in settings\about please. Any new apps? everything working ok? - german o2 rom midlet manager was not working and mms missing. Screenshots would be good if possible.
ROM 3.4 eh?
Well worth waiting for [/sarcasm]
Thanks for the pictures. As i thought much the same as the o2 german rom. I can see the ipl,spl has gone up to 3 - interested to know if that works with pof's uspl - if it doesnt people will have problems reflashing - i would just flash the os until its confirmed that uspl works with this ipl,spl.
btw does the orbit boot faster than with wm5 and what camera version does it use?
Doesn't look overly worthwhile installing it tbh, the HTC release was version 3.7 of Windows so is already ahead. Think I'll be sticking to the custom version I've cooked for myself tbh
It took 58 seconds from pressing the reset button to start up.
It has Camera 4.03

Categories

Resources