Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse
curious if its just mine. if my phones been sitting a while and off. if i open my moto h700 my bluetooth headset doesnt connect. but if i wake the phone first then the bluetooth will connect.
never had this problem with my tp
I have a similar problem. When I receive a call over bluetooth, the phone wakes up and then when the screen shuts off, it drops the bluetooth connection but the call is still active. When I am connected to bluetooth PAN for tethering, the same thing, when the screen goes to sleep, the Internet Connection drops.
When I connect to my car via bluetooth and make a call, the display wakes up and I would prefer it stayed dark. My car gives me all I need WRT the status of the call and other phone-related controls and info.
I don't seem to be able to find a way to disable this. Anyone?
TIA!
Sconnie
When I set my Shutdown Delay When ACC Off to anything but zero, the bluetooth stays on when I turn off my car. I usually connect my bluetooth headphones when getting out of the car, but my iPhone reconnects to the headunit unless I'm really far away. I don't want to lose the convenience of the delayed shut down nor the convenience of auto connecting when I first get in my car. So, I've tried to create a Tasker profile that will turn off bluetooth, but I can't seem to find the right parameters. Any idea how to have bluetooth turn off when the headunit first enters Delayed Shutdown?
FYI: I'm on the latest Malaysk ROM.
I would be interested in a solution to this as well.
I think what you are looking for is a sleep or shutdown intent. I have a vague memory of someone talking about this in the origional very long thread. Might be worth searching throu that for intent or intents.
Any update regarding this issue?
Does anyone know a way to tell the phone to connect to the car bluetooth for calls rather than the watch when I get in the car? Then also switch back to watch bluetooth calls when I leave the car?
thanks
Does the car connect to the phone at all when you get in, or does being connected to the watch block this?
I'm wondering if you place the call/answer the call with the car's menu system/steering wheel controls what happens, or if you are unable to even get this far.
Same problem
I'm having the exact same problem.
Carkit does connect (you can see in settings) but it says "(no phone calls)".
Watch is alsoo connected and says "(phone calls)
When i use voice control or the buttons on the dash to start a call it says no phone connected.
So my phone says that it is connected to carkit (no phone calls notification however), but if i look in settings from carkit it does'nt show phone connected...
The phone doesn't even connect to the car - I have to go into bluetooth settings on the phone and manually swap between the two when I get in and out of the car. I only connect to the cars on phone, not media audio.
I use the phone in 2 different cars, so ideally want to be able to automatically prioritise which bluetooth it connects to. I know there are apps like tasker which can do this but they are so complicated (or I'm too blonde!).
other thread
Found another thread already covering the subject...
Hope this helps...
http://forum.xda-developers.com/huawei-watch/help/android-wear-6-0-vehicle-bluetooth-t3327307