Changing resolution to get Goodlink 4.7 working on WM5? - JASJAR, XDA Exec, MDA Pro Software Upgrading

I have tried to install Goodlink version 4.7 (for WM5) on my Jasjar. Goodlink is a push e-mail service. However, I cannot complete the installation as the text appears compressed and instead of entering a 15 digit pin, I can only enter a 9 digit pin. Does any one know if the resolution on the Jasjar can be changed as this seems the most likely cause as the program runs ok on the KJam?

Good Link 4.7
Hi,
I Have instaled in the Universal using the Package for the Phone Edition 2003, instead of the magneto one.
Regards,
Belaten

Does it work ok? I thought that there were problems when installing as it detected a non approved device.
Can you send me a copy of version 4.5?

4.5 does not work on the Jasjar as it looks for a Windows 2003 device.

GoodLInk
It works if you install the wm2003 one (https://get.good.com/GetGoodLinkPPC.exe). You have to use the OTA setup instead of the cable one.
Regards,
Belaten

Thanks Belaten.
It works perfectly now!

Things I have do
I have set registry changes for the correct one. For example the option "data connection always on" and "Speeding up WM5". Now the PDA is perfect with the goodLink.
I have change the softkey for the GoodContacts and GoodCalendar.
Regards,
Belaten

This no longer works
The link to the 2003 version of Goodlink is broken. Any other ideas for how to get the necessary file?

Related

Tomtom V4.40 and V5 Backlight Solution

If you look at the attached word document when Tomtom launches it sets the following registry keys
HKCU\ControlPanel\Backlight\ACTimeout to &FFFFFFFF and
HKCU\ControlPanel\Backlight\BatteryTimeout to &FFFFFFFF
when on my XDA2 they should be 300 and 600 respectively. When Tomtom exits these values are restored.
I have written a program that launches Tomtom, then after 7 seconds restores these registry values to their original values and viola the backlight is restored without the need for the user to have to adjust it manually.
Here is the code and I shall next day upload a cab file with more details and which can be installed. It is configurable and places a shortcut in your start menu.
Enjoy.
Great Job Sjubb
Now i can upgrade to WM 2005 again :wink:
Greetings [email protected]
Thanks Sjubb. Great work
n/a
n/a
Microsoft Compact Framework 2.0 (Beta2) redistrubatable
Compack Framework Version 2.0 is no longer needed
They should work straight away now as I have produced a version that works with Compact Framework Version 1.0 (and this is installed by default on most PDAs)
n/a
n/a
n/a, see bottom for page for help on compact framework
n/a, see bottom for page for help on compact framework
Microsoft Compact Framework 2.0 (Beta2) redistrubatable
The problem I seem to have is that Microsoft Compact Framework 2.0 (Beta2) redistrubatable will not install correctly. I've tried the one sjubb uploaded I've downloaded it from microsoft. What happens is everything seems to install ok (with both versions) but then when my XDA2 resets itself nothing! No program! and in add remove programs the tick box indicates that it's not been installed. Many thanks to sjubb for his help and Buzz for the OS.
rom version 1.05g.00wwe
rom date 04/17/05
radio 1.10.00
protocol 1337.18
n/a
n/a
sorted now!
Right guys,
A lot simpler now. No need for Microsoft Compact Framework 2.0, they should run straight away now (as most PDAs have version 1 installed) as I have made it compatible with version 1.0
Just download the attached files and follow the instructions in the word document.
cheers
Steve J
OpenNETCF.zip
you will need to extract it in order to put on your device.
Just one slight hiccup...
Hi SJubb, Many thanks for your effort. Yet another masterpiece in the making!!
I followed your instructions (the latest one without the Framework 2) and.
It starts tomtom fine, but the light is still disabled. I am running Magneto (clearly..).
Many thanks for your effort. Really look forward to getting it working.
Works!!!
Sorry SJubb, I take it back. Restarted, repeated install, works like a charm!! Many thanks for such a great app, now all we need is Widcomm for Windows Mobile 5 and we're set!!
You, along with the rest of the gurus are what makes owning an XDAII such a pleasure. I only wish I had the skill to contribute to this endevour.
info
monster what version of windows 2005 are you on?
I have someone on 1.50f experiencing problems. I myself could not get it to work properly on that version.
cheers
Steve J
I have installed this, and it works. The only problem is, that everytime i run the program a dialogbox turns up saying: The maximum delay interval in order to turn the backlight on is 20 seconds. This is avoid hanging your xda2. It will be set to 7.5 seconds.
Is there a way to avoid this dialog box?
Apart from this it works perfect. Thank you for all your work.
regards
John
You need to adjust the interval as part of the shortcut. If you see the user guide it gives details.
If you don't want to do that go into file explorer, go to \windows\start menu\programs and delete the shortcut.
Then go back to the original patch file, rerun it and it will recreate the shortcut for you with a default of 7.5 seconds.
Please test and advise.
cheers
steve jubb
forgot!
Forogot to mention make sure the number you use for the interval is less than 20.
Hi
I have tried this several times now. but the dialog box still appears.
I need to tell you, taht when i press ok to the dialog box tomtom starts and backlight is turned on.
I just wantted to get rid of the dialog box.
my device is a spv M1000
and I use this rom:
WM2k5_1.50h_XDA2_HIMALAYA
I have opend the shortcut in notepad and it looks ok according to the install guide.
regards
John
fair dos
version without messagebox
enjoy
steve jubb
Perfect
Hi
Thank you, now it works perfect.
You have made a great work.
regards
John

WM6 Rom WWE Offcial !

Official Windows Mobile 6 HTC Artemis WWE
Requirements: HTC Artemis
Overview:
P800w WM6 Upgrade code (2007/07/13)
ROM version: 3.7.707.1
WWE ROM date: 06/21/07
Radio version: 02.69.90
Protocol version: 4.1.13.30
ExtROM version: 3.6.707.101
Update Radio to V1.47:
http://rapidshare.com/files/42231741/radio_1.47__hermes.rar
File content:
1.P800w Windows Mobile 6 ROM code upgrade
2.Windows Mobile 6 New Features Guide
3.CE Star (For People who want Chinese Input)
More Info:
Code:
http://www.g2designz.com/index.php?showtopic=44
http://www.asia.htc.com/asia/event/WM6/index.html
Click to expand...
Click to collapse
Download Instructions:
IMPORTANT! - please read these instructions carefully before updating your device
1. Download the .zip file and extract the .exe file within.
2. Ensure Activesync v4.5 (or higher) is installed on PC/laptop for OS WinXP and below. For Windows Vista and above there is no need to install ActiveSync.
3. Connect P800w to PC/laptop.
4. VERY IMPORTANT! - Ensure your device is connected properly to the PC/laptop.
5. Make sure the battery is charged to at least 50%.
6. Double-click on the .exe file to run the update utility.
7. VERY IMPORTANT! - All files and software on the device will be lost after the update. Please ensure a copy of your important files is backed-up somewhere else.
8. Please close all programs on your PC/laptop when running the update utility.
9. VERY IMPORTANT! - Do not unplug the device when the update process is running, doing so may damage the device.
10. After updating, the device will reboot, this is normal.
Note: HTC just releases a new WM6 Rom upgrade version program. Please note that there is a need to reinstall new MapKing software once you have finished the upgrade to Windows Mobile 6. The MKID of your MapKing map will be changed. Therefore to continue to use the MapKing map, you need to follow the steps below in order to apply a new registration code:
1.Please access, http://www2.mapking.com/UpgradeScheme_Dopod.htm 2.Input your original MapKing product authorization code. After the verification, you can proceed to the next step: Input your new MKID and press the “Submit” button. Then you will get a new registration code.
Rapidshare.com Download:
http://rapidshare.com/files/42891918/P800w_SEA_ENG_WM6_Upgrade_20070713.zip
FROM : PPCWAREZ !!
http://forum.ppcwarez.org/viewtopic.php?t=25605
http://www.g2designz.com/index.php?showtopic=44
Where
Hi
Where do i see my orig MKID ?
02 xda orbit??
will this work on the orbit?? or which one is best for it
thanks
T-mobile III NL
Work great !!
Dont forget to run first USPL !!!
Unninstall apps
I how Unninstall:
- Voice speed dial (I hate this apps)
- ClearVue PDF
- Calculator
What is SIP Configuration?????
Thank you
Try to deactivate HTC's phone skih. The WM6 default skin now have great new options.
Here is the registry change:
Remove operator skin from Phone app
If your device's Phone app is skinned, you can remove by setting:
HKLM\Security\Phone\Skin\Enabled = 0 (DWORD decimal)
Similarly, you can restore it with:
HKLM\Security\Phone\Skin\Enabled = 1 (DWORD decimal)
I how Unninstall:
- Voice speed dial (I hate this apps)
- ClearVue PDF
- Calculator
What is SIP Configuration?????
Thank you
LeoArg said:
I how Unninstall:
- Voice speed dial (I hate this apps)
- ClearVue PDF
- Calculator
What is SIP Configuration?????
Thank you
Click to expand...
Click to collapse
I dont know how, or if you can uninstall those programs..look in your system folder under program files, but I dont recall ever seeing those programs in there. I think they are in the extended ROM and would have to be removed before you flash...but I dont know how to do it, or if that information is correct.
I do know, however, that SIP has to do with Voice Over IP - Internet, or WiFi calling. Thats all I know on that subject, not a feature I ever got excited about.
LeoArg said:
I how Unninstall:
- Voice speed dial (I hate this apps)
- ClearVue PDF
- Calculator
Click to expand...
Click to collapse
First; the calculator can NEVER be removed (it's part of the WM Operating system).
For the Voice speed dial i'm not sure, but you can remove apps that were installed from the EXTended ROM by doing a hard reset, and then immediately do a soft-reset as soon as the 'customisation-process' starts (that's what loads apps from the extended rom to your device, and so you skip that).
HOWEVER: as there may be some customisations in there that are needed for good operation on your network, you do this at your own risk...
But let's talk shop... (on-topic)
I've got a Trinity with an official Dopod WM6 ROM on it, and now i am looking for upgrading my friends Artemis...
So i wondered if there are any issues with this ROM, and how exactly all of you flashed this on a different CID device (my Friend 's got a Dutch (NL) Artemis)... So far i have found out that apparently the Artemis has to be CID unlocked completely before flashing different CID ROM...or are there hacked bootloaders out there that work too...?
Sorry for asking a question that may have been answered before, but an Artemis is just not my native device as you understand...
Search for USPL, its a hacked bootloaded that makes it possible to load any rom onto your device.
no issues so far, rock solid stability. faster performance than the black and blue rom as it doesnt include all the added junk
I don't understand why you should "upgrade" to radio 1.47, when 02.69.90 is in this ROM..?
Yes! WM6 is on my Orbit - going to remove the horrible green HTC dialpad.
However the SIP/VoIP stuff is missing from the WWE rom
Could somebody please check if this ROM includes Czech regional settings?
Czech is in the list in Regional Settings
LeoArg said:
I how Unninstall:
- Voice speed dial (I hate this apps)
- ClearVue PDF
- Calculator
What is SIP Configuration?????
Thank you
Click to expand...
Click to collapse
About the only way to remove those particular apps would be to cook your own ROM, resetting before customization might get rid of Voice command and Clearvuew PDF, but I am not sure. I have contemplated cooking my own version of the official 3.5 ROM to get rid of Voice Command and ClearVue but it has not been worth the effort yet. Maybe once the official HTC ROM comes out. I install too many programs to make me want to flash regularly.
Thank you Janetpanic
Dear Tom:
I like your 3.7 version, but, this is very slow (3.5 is mor fast)
I like a New ROM within apps (Not clean, please), but with:
ArcsoftMMS
AudioManager
Office 2007
BT_FTP
HTC Camera 4.11 (From HTC Touch)
HTC Home
QuickGPS
ShareDLL
TaskManager
Sim manager
VoiceRecorder
NetworkWizard
Esmertec Jbed
StreamingMedia
More Themes (I got various themes ;-)
Calendar today o secretary calendar (see WM6 for wizard)
Speed dial today (see WM6 for wizard)
Messeges today
Touch Flo (but optional)
Thank you
Is this Rom Working on HTC P3300? Is Italian Language support?
TY
Bye
dannyoneill said:
Search for USPL, its a hacked bootloaded that makes it possible to load any rom onto your device.
no issues so far, rock solid stability. faster performance than the black and blue rom as it doesnt include all the added junk
Click to expand...
Click to collapse
Thanks...
Done some more research as well, and i'll get flashing this P3300 of friend asap...

Sleuth's Developer ROM v2.0 Released!

v2.0 of my developer ROM is now available. Core/XIP is the official WM6 core. Bluetooth, Power Management, Communications Management and GDI are also from the official ROM. Most of the built in apps have been refreshed. Finally, for you Tom-Tom/VPN addicts, the DUN bluetooth profile is now available in addition to Internet Sharing!
Because my imgfs is completely custom, this ROM will report itself as follows:
CE OS 5.2.1437(Build 17913.0.3.0)
v2.1 of this ROM includes:
Both DUN and Internet Sharing bluetooth profiles are available!
SDHC support: tested with 4GB cards
GLYPHCACHE limt re-optimized at 32,768
Mobile Office 2K7 includes OneNote 2K7
My ATI Imageon patch cooked in
The New Block style CommManager GUI is enabled.
The latest build of HTC X-Button v1.51 cooked into the base ROM.
The Cyberon voice dialer which can save/restore voice tags is cooked in.
Windows Live build 1400 (more stable than what is in the current Official ROM) is cooked into the base ROM
4MB Paging File
Big Storage
A2DP optimized for highest Fidelity based on hardcore's research.
additional apps: GSFinder+, DotFred's Taskmgr, PHM Regedit, SIPChange, Austinboy's Fieldtest, Adobe Reader LE, Audio Manager, Streaming Player
Windows Update and QOS removed
VoIP optimizatons: dialplan normalized for US calling (default areacode is 262 on 7 digit calls), connect over 3G as well as WiFi enabled
Live Search today plugin is set to use Google and works just fine when spaces are part of the search term
can toggle the phone skin between Video and Non-video modes using lsvw's TweakUI program
WM6 tap sounds are enabled
This ROM will play 3G streams or local mp3s over A2DP in powersave mode to Coreplayer or Audio Manager. Unfortunately, WMP can't do this. This is because I forgot to refresh WMP
The Official bluetooth Handsfree Profile has been cooked into this ROM. This provides even better Car Kit compatiblity.
This ROM is free for you to personalize. I'm not in this for the donations (although they're always appreciated ), rather my primary focus is to give you a better Hermes. So, use this base ROM to learn the ROM kitchens then go make your own ExtROM for this to customize Today Screen etc. Simply add a file called preconfig.txt to /windows to enable autoconfig (you'll need to dump a production ROM to unravel the syntax btw) to run your extrom at cold-reset startup. Because Preconfig.txt has been removed, the base rom has no autoconfig and will go directly to the today screen.
Free storage memory remains at about 49MB and free program memory is 29MB. Displayed Today screen items have been reduced and re-ordered in this manner (note: the additional plugins are still present, just unchecked in Today settings):
Date
Live Search
Internet Calling
Owner Info
Email messages
Appointments
The installer will also upgrade your splash screens to the Gold HTC Innovation theme. Your Radio, IPL and SPL will remain unchanged. However, for best results I recommend running a radio that's at least 1.40. AT&T subscribers in the US should upgrade to the v1.48.00.00 radio for vastly improved performance.
I'm using OliPro's latest RUU installer in this version and recommend installing using the SSPL option. Vista users: be sure to check out this guide for how to make SSPL installers work on your version of Windows. Or, jcespi2005 reports that with the latest WMDC (v6.1), you can upgrade through CustomRUU normally like in XP. WMDC 6.1 itself can be found here.
Download v2.1 now from RapidShare.
Download Crackberry edition now from RapidShare.
Support/Provisioning Cabs: PM a link and I'll add it here
WPBear's Cingular/AT&T provisioning cab (thanks to Tylr for locating this) http://forum.xda-developers.com/showpost.php?p=1163312
WMXL Live Cingular keymapping cab (thanks Lurch) http://forum.xda-developers.com/showthread.php?p=1332269#post1332269
"Bling" in this ROM
Sorry, but there are no fancy today themes, catchy colors or spectacular splashes included in this base ROM. All you get is performance and reliability. Bling is a personal expression, so you're free to add your own.
So, what's on your today screen? Post screenshots! Upload themes & post links and I'll put them below.
CUSTEL's black theme (thanks CUSTEL) http://www.tri-syndicate.com/CUSTEL.tsk.zip (just change the name to CUSTEL.tsk after downloading, its not a zip file). I'm actually running this one now because the block style taskmanager looks better with black menu/taskbars.
v2.0 Release Notes (check back here periodically for updates)
X-Button requires the latest versions of SPB Weather/SPb Time to correct the "Black Font" issue. The latest version of SPB Weather is v1.7.0 Build 767 and the latest version of SPB Time is v2.1.5.
The softkey editor settings are initially out of sync with the actual softkeys. Additionally, you must SR after the first time you use it to get your changes to stick. After that, the program works normally. This is a HTC bug unfortunately in softkeyapplet.cpl
executables stored on your SD card that don't have their own icons will flicker when viewed with the built in Filemanager. GSFinder+ does not experience this quirk. It's very unusual for a Windows Application to not have an icon resource built in so you will probably not even see this one. If you must see what it is I'm talking about, download powerstatus.exe from here, store it on your SC card then view the directory in filemanager.
Be sure to soft-reset after you complete the initial startup. This will activate HSDPA and initialize your WiFi MAC address.
Howto: Speed up CommManager and free up storage memory.
Use PHMRegedit to search for the value "DisableButtonText". Change this value from a 2 to a 0. Reset your Hermes by pressing and holding the power button then answering yes to the dialog that is eventually displayed. The downside is that you disable the "eye candy" interface too.
Sleuth255 said:
v2.0 of my developer ROM is now available.
Click to expand...
Click to collapse
Great news Sleuth. Thanks a lot.
Other than rapidshare, other mirror please... I've also problem downloading from megaupload.
Thanks.
Just started testing matts....1 hour ago....I will load this up tommorrow.
Thanks, been waiting for this....
Sleuth,
What was your base; the Dopod or the AT&T WM6 release?
With your previous release I had some problems car charging; but now I run the Dopod rom and I don't have the problem anymore.
I will try your rom and report back.
Cheers and thanks,
Hellejoep
thanks Sleuth! this sounds like another great build! will be flashing it soon.
hellejoep said:
Sleuth,
What was your base; the Dopod or the AT&T WM6 release?
With your previous release I had some problems car charging; but now I run the Dopod rom and I don't have the problem anymore.
I will try your rom and report back.
Cheers and thanks,
Hellejoep
Click to expand...
Click to collapse
All Official WM6 components are from the Dopod ROM.
awesome, thanks Sleuth255. I'll be removing some of the apps which I dont use and flash it. thanks again.
As if i wasted my RapidShare download on some other crap... now I have to wait 76 minutes before I can grab this.. Im actually tempted to buy credits just to get it!
Thanks Sleuth.. been looking forward to this one...
Thanks
wongsterwish said:
Other than rapidshare, other mirror please... I've also problem downloading from megaupload.
Thanks.
Click to expand...
Click to collapse
http://www.megaupload.com/pl/?d=ADAXO0LI
Great stuff, I´ve been testing the beta of this for a week and it´s solid. Great work sleuth....
Install New Rom Sleuth's Developer ROM v2.0
Thank for new rom Sleuth's.
I install this for my HERMES for test:
RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe
Necessary install a new Sleuth's Developer ROM v2.0 but when press AUTO for program RUUWrapper.exe the message is ERROR.
Before install the ultimate RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe the program RUUWrapper.exe FUNCTION and install different your rom.
TODAY NOT POSSIBLE INSTALL ANOTHER ROM.
Why there are this problem?
I reinstall Hard-SPL-V7 but the problem is THE SAME.
The bootloader is 1.04 and 2.10OLIPRO.
Thack for your answer.
mateuszrac said:
http://www.megaupload.com/pl/?d=ADAXO0LI
Click to expand...
Click to collapse
You legend.
franchi.flaviosrl said:
Necessary install a new Sleuth's Developer ROM v2.0 but when press AUTO for program RUUWrapper.exe the message is ERROR.
Click to expand...
Click to collapse
You mean when you autodetect on the bootloader selection screen?
If so its just that activesync hasnt detected the phone, disconnect, soft reset it, let it boot to windows mobile and plug the usb lead in again.. then try again.
Just flashed this one and noticed something strange.. My WiFi MAC has changed.. it isnt missing.. but it is weird and may be an indication of a WiFi MAC bug..
Its now 00-00-00-00-AC-9D which doesnt look like a valid MAC address..
Im gonna try it now and see if its still working.
/edit: It Isnt working, networks all come up as unavailable when I try to connect to them but its not the same issue as the DeadWLAN one as I CAN activate wifi.
hmmm.. seems that the solution is to turn on wifi, then soft reset.. when it comes back up your MAC will be right again and all will be fine.
Strange bug/error? Or just my device playing silly games?
sambartle said:
Just flashed this one and noticed something strange.. My WiFi MAC has changed.. it isnt missing.. but it is weird and may be an indication of a WiFi MAC bug..
Its now 00-00-00-00-AC-9D which doesnt look like a valid MAC address..
Im gonna try it now and see if its still working.
/edit: It Isnt working, networks all come up as unavailable when I try to connect to them but its not the same issue as the DeadWLAN one as I CAN activate wifi.
Click to expand...
Click to collapse
can you try to reflash and see how it goes ??
the_passenger said:
can you try to reflash and see how it goes ??
Click to expand...
Click to collapse
Yep.. ive got it working by turning it on and soft resetting.. but im reflashing now to see if it happens again.
franchi.flaviosrl said:
Thank for new rom Sleuth's.
I install this for my HERMES for test:
RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe
Necessary install a new Sleuth's Developer ROM v2.0 but when press AUTO for program RUUWrapper.exe the message is ERROR.
Before install the ultimate RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe the program RUUWrapper.exe FUNCTION and install different your rom.
TODAY NOT POSSIBLE INSTALL ANOTHER ROM.
Why there are this problem?
I reinstall Hard-SPL-V7 but the problem is THE SAME.
The bootloader is 1.04 and 2.10OLIPRO.
Thack for your answer.
Click to expand...
Click to collapse
Instead of auto, choose the version of hardspl that you have installed (boot to tri-color to find this)
Flashed again.. this time its changed too: 00-00-00-00-99-E1
powering on WLAN and Soft resetting has returned it too it's proper value.. Seems to be a weird issue where the ROM cant read the correct MAC on first boot.

So many ROMS, so little time! Sleuth's v3.0 Developer ROM is here

If you're a ROM flashing addict, nows a good time to own a Hermes!
This ROM has been completely re-worked and is now based on the official imgfs. It reports itself as follows:
CE OS 5.2.1437(Build 17944.0.3.1)
ChangeLog
v3.2 (available now!) contains the following fixes:
The v3.1 patch
The Aku portion of the CE build number now displays correctly
All Softkey cpanel applet issues identified in the release notes have been corrected
Audio Manager v1.02 build 614.712 refresh fixes the "only plays one song in standby mode" issue. This is the official build information reported by the so-called Audio Manager 1.2 update btw.
Initflashfiles no longer copies information from \windows to \program files\<app dir> for Sipchange, GSFinder+, Taskmgr and Fieldtest. This increases storage memory by about 1 meg.
Notes:
if you restore from backup after upgrading to this version, the developer utilites will be restored back to \program files and storage memory will be decreased to your original amount. To prevent this, exclude the app directories "green software", "sipchange", "taskmgr" and "fieldtest" as well as the applications' associated shortcuts in \windows\start menu\programs from the restore. Also exclude the sipchange shortcut from \windows\startup.
There will not be a v3.2 Crackberry edition. Sorry.
v3.1 includes target.img.zip which corrects the Intent Java midlet manager issue identified in the release notes
v3.0 of this ROM includes:
Both DUN and Internet Sharing bluetooth profiles are available!
SDHC support: tested with 4GB cards
GLYPHCACHE limt re-optimized at 32,768
Mobile Office 2K7 includes OneNote 2K7
My ATI Imageon patch cooked in
The New Block style CommManager GUI is enabled.
The latest build of HTC X-Button v1.51
The Cyberon voice dialer which can save/restore voice tags is cooked in.
Official release of Windows Live
4MB Paging File
Big Storage
A2DP optimized for highest Fidelity based on hardcore's research.
additional apps: GSFinder+, DotFred's Taskmgr, PHM Regedit, SIPChange, Austinboy's Fieldtest, Adobe Reader LE, Audio Manager, Streaming Player
Control panel addons: HTCTweakUI, ClearType Tuner, Softkey programmer
Windows Update and QOS/Customer feedback removed
VoIP optimizatons: dialplan normalized for US calling (default areacode is 262 on 7 digit calls), connect over 3G as well as WiFi enabled
Live Search today plugin is set to use Google
can toggle the phone skin between Video and Non-video modes using TweakUI. Video calling skin is initially enabled.
WM6 tap sounds are enabled
This ROM has EXTROM customizations disabled. If you wish to re-enable this, create preconfig.txt pointing to your own custom extrom, add it to /windows and re-cook.
Free storage memory is about 47MB and free program memory is 31MB. Displayed Today screen items have been reduced and re-ordered in this manner (note: the additional plugins are still present, just unchecked in Today settings):
Date
Live Search
Internet Calling
Owner Info
Email messages
Tasks
Appointments
As always, the installer will upgrade your splash screens to the Gold HTC Innovation theme. Your Radio, IPL and SPL will remain unchanged. However, for best results I recommend running a radio that's at least 1.40.
I'm using OliPro's latest RUU installer in this version and recommend installing using the SSPL option. Vista users: be sure to check out this guide for how to make SSPL installers work on your version of Windows. Or, jcespi2005 reports that with the latest WMDC (v6.1), you can upgrade through CustomRUU normally like in XP. WMDC 6.1 itself can be found here.
Download v3.2 now from RapidShare.
Here's a v3.2 mirror from Chamelion.
Download v3.1 Crackberry Edition now from RapidShare.
Bling!
schen's HTC HomePlug solution can be found here
CUSTEL's black theme (thanks CUSTEL) http://www.tri-syndicate.com/CUSTEL.tsk.zip (just change the name to CUSTEL.tsk after downloading, its not a zip file). You may have to disable x-button momentarily before selecting it.
Support/Provisioning Cabs: PM a link and I'll add it here
WPBear's Cingular/AT&T provisioning cab (thanks to Tylr for locating this) http://forum.xda-developers.com/showpost.php?p=1163312
WMXL Live Cingular keymapping cab (thanks Lurch) http://forum.xda-developers.com/showthread.php?p=1332269#post1332269
v3.x Release Notes (check back here periodically for updates)
The softkey editor settings are initially out of sync with the actual softkeys. Additionally, you must SR after the first time you use it to get your changes to stick. After that, the program works normally. This is a HTC bug unfortunately in softkeyapplet.cpl
Because the base imgfs has been changed back to hermes from its previous Universal base, this ROM will also change your device ID if you are upgrading from previous Sleuth ROMs. The device ID will become identical to the official Hermes ROM device ID.
Howto: Speed up CommManager and free up storage memory.
Use PHMRegedit to search for the value "DisableButtonText". Change this value from a 2 to a 0. Reset your Hermes by pressing and holding the power button then answering yes to the dialog that is eventually displayed. The downside is that you disable the "eye candy" block-style interface too.
If Midlet Manager displays the following message: "Cannot run target.img" then copy the attached target.img.zip to /windows on your hermes to resolve. If you need this fix cooked in, then follow these instructions:
deactivate direct push & your data connection if you run Direct Push
Take a full backup with your favorite backup software.
Download v3.2 from the above rapidshare link & install.
Restore from backup.
If pressing the "Calendar", "New SMS" or "New MMS" softkey displays a not found message then download and install the attached calendarfix.cab to correct. Make sure you choose "Install to Device" if asked.
This rom is based on the DoPod release. Because of this, vp3g's ptt cab will not enable PTT on AT&T networks.
Great release, nice work Sleuth
gonna try it tonight
Will have to wait until BB Connect is compatible before I try this out.
Car Kit Profile
Sleuth, does this ROM also include the updated car kit profile your V2/2.1 ROM had?
I tried to activate the ext. rom in v2.1, but didn't succeed. I did read a lot and tried different rom kitchens but no way I could activate the ext. rom.
Could someone please recook this rom, with activated ext. rom?
I would like to have this, so I can use my RemoteProtect software in a more secure way. After a hardreset everything will be re-installed.
Thank you in advance
Same request, my sincere apology.
Any other mirror available other than rapidshare and megaupload? Todate, can't seem to download anything from the 2 sites.
Thanks in advance.
Nice & and fast
Thanx for a great job in just 5-6 days
yes.. what a relief, the ROM baker has been baking again... need this fix, thanks sleuth.. u da man
Well in Sleuth.
Thanks again Sleuth for your work
Hope tomorrow my hermes will be back repaired, and try your 3.0 version to see if BT works fine with my Handsfree car system.
I'll report teh result with the BT hands free and power save as soon as i can.
Regards.
Khristopher said:
Will have to wait until BB Connect is compatible before I try this out.
Click to expand...
Click to collapse
The same HEX editing should be applicable to this release.
Why do you put the Cyberon Dialer? That is one of things I hated about the stock firmware. I am a noob when it comes to build my own firmware package - I actually I never tried and currently don't know how. I would like to use yours if it didn't have the cyberon dialer. Maybe in the future you could have 2 versions one with the dialer and one without?
Thanks for listening and keep up the good work!
medler said:
Why do you put the Cyberon Dialer? That is one of things I hated about the stock firmware. I am a noob when it comes to build my own firmware package - I actually I never tried and currently don't know how. I would like to use yours if it didn't have the cyberon dialer. Maybe in the future you could have 2 versions one with the dialer and one without?
Thanks for listening and keep up the good work!
Click to expand...
Click to collapse
Honestly, this is the only thing holding me back... I like M$ Voice Command.
lokmeup said:
Honestly, this is the only thing holding me back... I like M$ Voice Command.
Click to expand...
Click to collapse
Ditto.
Also why there is an advice to use SSPL? Why not to use Hard SPL?
lokmeup said:
Honestly, this is the only thing holding me back... I like M$ Voice Command.
Click to expand...
Click to collapse
Primary reason: not licensed with the DoPod base. You have to buy M$ VC software to use it. Including it in a ROM whose base didn't originally contain it would therefore be piracy. Also, the current M$ voice command needs hacks to (almost) properly work with BT headsets.
Cyberon is the licensed voice activated contact dialer & gives you full BT enabled dial functionality.
joedoe said:
Ditto.
Also why there is an advice to use SSPL? Why not to use Hard SPL?
Click to expand...
Click to collapse
SSPL avoids the following potential issues:
no hardspl installed
Installer can't autodetect oliPro bootloader version
"I don't know how to boot to tri-color"
various other n00b issues
intent midlet manager
im not sure but when i run my intent java in this rom, i get the error message "cannot run target.img.zip" ,i installed a cab of intent java and problem was solved, but the cabe eats up around 5mb ongmy storage
great rom.
just the utilities i need.
Thank you sleuth
lokmeup said:
Honestly, this is the only thing holding me back... I like M$ Voice Command.
Click to expand...
Click to collapse
Don't let this hold you back Sleuth did an excellent job - install the ROM and simply add VC cab file with VC WM6 fix cab. But honestly untill M$ will fix their BT brainfart many peope actually prefer Cyberon products.

Transcriber Missing in WM6.1 Classic

hai guys, I noticed after using it a few weeks that I'm missing the Transcriber feature as input option in my WM6.1 Classic, I'm using CE OS 5.2.2021 Build 19199.1.0.0
I searched around here and tried two different Transcriber.Cab's from this site and from www.4winmobile.com bot do not work (Transcriber still doesn't show up; and WM6.1 installer tells me "it may not work, as program is designed for an older version"). No registry entries either (I searched for "transcriber" keyword across entire registry).
Can anyone pretty-please help me out on this one ?
I'm using a hx2495b iPAQ and got the english ROM from a (Korean?) website, which was linked from here (somewhere in a "hx2000"-ROMflashing thread. Everything else seem to work fine.
thx
@
For some HTC models post #23 in this thread provides a solution:
http://forum.xda-developers.com/showthread.php?t=406136&page=3
maybe it also works for you...
KnOeFz said:
For some HTC models post #23 in this thread provides a solution:
http://forum.xda-developers.com/showthread.php?t=406136&page=3
maybe it also works for you...
Click to expand...
Click to collapse
Nope doesnt work, if i read it correctly it's for BLOCK RECOGNIZER and not for TRANSCRIBER - i looked into the CAB-file, and it's pointing to a MSIMNL.DLL (for Netherlands InputModule) so i did it manually to MSIM.DLL (which is 120kbyte in size) - which according to the registry is/was set correctly, but not even in the registry was a TRANSCRIBER pointer/entry. After installing your suggested CAB i got TWO BLOCK RECOGNIZER modules/choices
It seems to me that both relevant DLL's are there (MSIM.DLL w. 120kbyte) and a MSIM.96.DLL (67kbytes in size), just missing the proper registry pointers to "activate" it.
anyone more suggestions?
cheers
@
The download cab under "Deleted from ROM (1...." at
http://forum.xda-developers.com/showthread.php?t=313081
works on my Loox N560 WM6.1. And it looks the full monty!
well, it's getting closer
it shows at least up now in the input selection pull-down menu, but it's kinda "defective" the area is not completely drawn, and it's missing entries. My windows-Installer tells me that this too was "designed for an older version of windows Mobile"
again, I'm using WM6.1 Classic, CE OS 5.2.2021 Build 19199.1.0.0 and in soft-boot the boot ROM reads as version # 5.20.01.C ENG
i got my ROM from here http://www.pdaviet.net/showthread.php?t=23740&page=2
not sure if that helps further
cheers
@
hm, now i got even a weirder effect.
i got myself Calligrapher v8.7 Build 8.379.0810
but the wierd thing is, it installs nicely, but i cannot start it up. Only the Config Manager and the PenCommander start up, but the WriteAnywhere or WritePad will not start, I cant even put in my serial number.
I noticed that at installation it has an option to uninstall the original WM 6.1 TRANSCRIBER (which I'm missing) - that option had a check-mark, but was "grayed out"/disabled.
anyone have an idea ? I'm getting desperate
cheers
@
I'm having the same problem as atlana, I installed Calligrapher 8.7 but cannot get it to launch. Calligrapher support suggested I delete some plug-ins from my Today screen, but even with NO plug-ins I could not launch Calligrapher.
Has anyone come up with a fix? thanks

Categories

Resources